Spuhr

Unique advanced firearms accessories that are highly innovative and have a high level of craftmansship.

Showing 1–21 of 38 results

Filter
  • SPUHR M5X35 TX20 CLAMPING SCREWS

    $19.99 Read more

    Article no.: A-0150

    M5x35 Torx 20 screws for the side clamp (5 pcs) on SP-***1 mounts. The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Includes SS washers.
  • SPUHR A-0037 PICATINNY RAIL H20 L75 MM

    $82.99 Read more

    Article no.: A-0032

    Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz
  • SPUHR SP-4001C Ø34 H30mm 0MIL PIC

    $559.00 Add to cart

    Article no.: SP-4001

    0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion.
  • Gray Ops Spuhr Ring Turret Guards

    Gray Ops Spuhr Ring Turret Guards

    $189.99 Add to cart

            ***Only compatible with Spuhr Rings***

    PURPOSE

    • Added protection for your scope turrets
    • Prevents “rolling a turret” during barricade shooting causing accidental misses and dropped points
    • Requested and designed by top level PRS shooters

    FEATURES

    • Machined from 6061 Aluminum and Hard Black Anodized
    • Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
    • Includes mounting screw hardware
    • Multiple mounting points to get the desired distance from each turret
    • Lightweight, Low-profile, but also strong enough to “load” into
  • SPUHR A-0032 PICATINNY RAIL H14 L75 MM

    $82.99 Read more

    Article no.: A-0032

    Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz
  • SPUHR SP-5001 Ø35 H30mm 0MIL PIC

    $559.00 Add to cart

    Article no.: SP-5001

    0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 6.5 mm/.255″ (from the bottom of the tube to bridge of the mount body) Length: 126 mm/4.96” Weight: 239 g/8.4 oz 10-degree wedge included
  • SPUHR SP-4601C Ø34 H30mm 6MIL PIC

    $559.00 Read more

    Article no.: SP-4601

    6 MIL/20,6 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 227 g/8.0 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting.
  • SPUHR A-0001 4 MM SPACER

    $41.99 Read more
  • SPUHR Separate Rings SR-4000 Ø34 H25.4MM PIC

    $469.00 Read more

    Article no.: SR-4000

    Height: 25.4 mm/1” Length: 32 mm/1.26” Weight: 183 g/6.5 oz Includes the A-0080/81 Leveling Kit
  • SPUHR 20-PACK RING SCREWS TOP COVER SCREWS

    $14.99 Read more

    Article no.: P-100

    A-0132 M4x10 Tx20 screws for new style top covers (20-pack). The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Note: for Top Covers with with 4-letter batch numbers and batch numbers from M13/XX forward.
  • SPUHR A-0119 BUBBLE LEVEL ASSEMBLY

    $165.99 Add to cart

    Article no.: A-0119

    External Bubble Level Assembly designed to attach forward on the scope mount body or ring. Perfect solution for shooters who are unable to focus on the built-in level in the standard ISMS series or who has a model without a built-in level. The angle of the assembly can be adjusted using two set screws. Includes screws. Weight: 20 g/0.7 oz
  • SPUHR MOUNT SCT-4001 Ø34 H30MM OMIL TIKKA T3X / SAKO TRG 21/42

    $348.99 Read more

    Article no.: SCT-4001

    Our new Hunting Series of mounts – offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCT-4001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o’clock or 3-/9-o’clock position. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 2.75 mm/.108″ (from the bottom of the tube to the bridge of the mount body) Length: 108 mm/4.25” (mount body) Weight: 153 g/5.4 oz Note: For rifles with TRG/Tikka T3 dovetail – NOT for Picatinny rail or SAKO TRG-S. . Does not have enough clearance for the Trijicon AccuPower® 4.5-30×56. 10-degree wedge included
  • SPUHR SP-4002C Ø34 H38 0MIL PIC

    $559.00 Add to cart
  • SPUHR SP-5002 Ø35 H38 0MIL PIC

    $559.00 Read more
  • SPUHR A-0012 PICATINNY RAIL H10 L35 MM

    $82.99 Read more

    Article no.: A-0012

    Picatinny Rail for Spuhr interface. Includes screws. Height: 10 mm/0.39” Length: 35 mm/1.38” Weight: 14 g/0.5 oz
  • SPUHR MOUNT HS40-23A SAKO AESTHETIC RINGS Ø34 H23/0.91″

    $223.99 Read more

    Article no.: HS40-23A

    Hunting rings for 34 mm tube on SAKO OptiLock bases/rails. Features two plain classic top covers. Height: 23 mm/0.91″ Weight: 79 gram/2.8 oz “Protected, EU Design Reg. No. 002438440/0001-0002”
  • SPUHR SP-4003B Ø34 H38 0MIL PIC

    $559.00 Read more

    Article no.: SP-4003B

    For scopes with long erector housings such as U.S. Optics TPAL and Nightforce BEAST. Distance from ring to ring is 82 mm/3.228″. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 147 mm/5.79” Weight: 268 g/9.5 oz 10-degree wedge included
  • SPUHR SP-3001 Ø30 H30mm 0Mil

    $559.00 Add to cart

    Article no.: SP-3001

    0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 9 mm/.354″ (from the bottom of the tube to bridge of the mount body) Length: 126 mm/4.96” Weight: 237 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting.
  • SPUHR MOUNT SCP-4001A Ø34 H30MM 0MIL PIC

    $334.00 Read more

    Article no.: HP30-25A

    Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz
  • SPUHR MOUNT SCP-3000A Ø30 H30MM 0MIL PIC

    $334.00 Read more

    Article no.: HP30-25A

    Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz
  • SPUHR MOUNT HP30-25A PICATINNY AESTHETIC RINGS Ø30 H25.4/1″

    $264.99 Add to cart

    Article no.: HP30-25A

    Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz

Spuhr

Other Brands

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!