Showing 1–21 of 61 results

Filter
  • Fix It Sticks Bubble Level Set

    $69.99 Add to cart

    Level your optics with machined aluminum levels, featuring precise UK-sourced bubble vials

    Kit includes:

    • Magnetic level
    • NATO/Pic rail level/anti-cant device
    • Protective foam carrier with pouch

     

  • Fix It Sticks Scope Jack

    $50.39 Read more

    Fix It Sticks Scope Jack

    A new way to level your optic, the Fix It Sticks Scope jack works with any 1/4 inch driver to quickly and easily level your scope to your NATO/Pic rail.

    Just mount the scope jack to the NATO/pic rail under your scope and turn the drive handle until the lifting arm engages with the flat section under your turrets.  Once the scope is level, maintain pressure while tightening your ring screws to keep optic level throughout the process.

    Requirements:

    • Works with any scope with a flat section under turrets
    • Needs a minimum of 1/4 inch clearance between NATO/Pic rail and scope
    • NATO/Pic rail must be accessible under optic
    • In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.

    Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Driver.

  • MPA BA Bolt Action Mount

    MPA BA Bolt Action Mount

    $389.99 Select options

    The BA Series Mounts are designed to mount high-performance optics onto your Bolt Action rifles with Picatinny Rail Scope Bases. The 1″ & 30mm versions have a center line height of 110%. 34mm models offer push-button fit for either aluminum or steel rails, while 35 mm and 36-inch long scopes can use the standard mounting hole pattern at either end, which measures 125 mils +/- .0015″. This interface ensures positive engagement on both spec positions and specs ones, so you don’t need specialized tools!

  • SPUHR M5X35 TX20 CLAMPING SCREWS

    $19.99 Read more

    Article no.: A-0150

    M5x35 Torx 20 screws for the side clamp (5 pcs) on SP-***1 mounts. The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Includes SS washers.
  • Gray Ops CNC Garmin Xero QD Mount KIT (Mount, Extension Arm, and QD Throw Lever Arca Clamp) 

    $289.00 Add to cart

    Garmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp 

     

    PURPOSE

    • The Gray Ops Garmin QD Mount was designed to be the most versatile, user configurable mount on the market for the Garmin XERO C1 Pro Chronograph.
    • Quickly and reliably attach/detach to any Picatinny Rail system or Arca clamp with our new patent pending QD system.
    • Multiple Mounting Options allows you to tailor the Garmin to your exact needs on the fly.

     

    NOTES

    • Comes in 3 configurations
    • Garmin QD Mount: Mount Only
    • Garmin QD Mount w/ Arm: Mount, Extension Arm, buyer provides their own ARMS 17 compatible arca clamp
    • Garmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp

     

  • US Optics Ext Cant Indicator Rail Mounted Swivel Bubble Level BBL

    $174.99 Read more

    US Optics Ext Cant Indicators with Swivel Bubble Level available for Picatinney or Weaver (Rail Mounted Style) and 30mm Rings (Ring Mounted). Screw on cover protects glass vial from damage when not in use. Those Riflescope Ext Cant Indicators by U.S.Optics include cover. USO Rail Mounted Swivel Bubble Level Ext Cant Indicator (Contoured) attaches to your Picatinny Base. U.S. Optics Ring Mounted Swivel Bubble Level Ext Cant Indicator attaches to your 30mm scope tube. Screw on cover of those USOptics Ext Cant Indicators protects the glass vial from damage when not in use. Level folds away 90 degrees when not in use. Made from 6061-T6 and Type III Hard Black Anodized.

  • HawkHill Customs Rifle Mounted Data “Dope” Card Holder RMD – Picatinny Mount

    $169.99 Read more

    The Hawk Hill Custom “RMD” or Rifle Mounted Data-Holder, also known as a DOPE holder, is designed to revolutionize target data management. Our flexible design with multi axis rotations allows target data and information to be easily viewed without changing shooting position. The RMD’s rugged construction will hold up to the demands of competition shooting as well as the toughest hunting, field and combat conditions. Kydex panel easily folds away when not in use to prevent injury or snagging.

    Included with product:

    • 300 mil pvc card and marking pencil to write directly on card. Won’t wash off in rain, but wipes away easily.

    • Industrial strength velcro for attaching various objects to card.

    Key features:

    • Mounts to Picatinny rail with no tools

    • Rugged, yet light weight 7075 aluminum

    • MIL-A-8625F TYPE III Hardcoat Anodize

    • All Stainless Steel Hardware

    • Detent click multi-axis rotation

    • Coated stainless external screws for a blacked-out look and extreme corrosion resistance.

    *Tips for displaying data on the RMD – the included white card and marking pencil are a great way to view data. Pencil easily wipes off with a cloth or even a finger but won’t wash off when shooting in the rain.

    Our preferred way to apply data to the RMD is with a strip of masking tape and a sharpie marker. There are many ways to use the RMD, these are only few we’ve found to be helpful.

  • Nightforce Clamp On Power Throw Level For ATACR/SHV Scopes

    $86.00 Add to cart

    The Nightforce power throw lever makes magnification changes fast and easy in all positions and conditions. The PTL fits ATACR, SHV 14x, SHV 20x riflescopes.

  • SPUHR A-0037 PICATINNY RAIL H20 L75 MM

    $82.99 Read more

    Article no.: A-0032

    Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz
  • HawkHill Customs Rifle Mounted Data "Dope" Card Holder RMD - SPUHR Mount
  • SPUHR SP-4001C Ø34 H30mm 0MIL PIC

    $559.00 Add to cart

    Article no.: SP-4001

    0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion.
  • Gray Ops CNC Garmin Xero QD Mount (Mount Only)

    $115.00 Add to cart

    Garmin Mount Kit: Mount Only

    PURPOSE

    • The Gray Ops Garmin QD Mount was designed to be the most versatile, user configurable mount on the market for the Garmin XERO C1 Pro Chronograph.
    • Quickly and reliably attach/detach to any Picatinny Rail system or Arca clamp with our new patent pending QD system.
    • Multiple Mounting Options allows you to tailor the Garmin to your exact needs on the fly.

     

    NOTES

    • Comes in 3 configurations
    • Garmin QD Mount: Mount Only
    • Garmin QD Mount w/ Arm: Mount, Extension Arm, buyer provides their own ARMS 17 compatible arca clamp
    • Garmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp

     

  • Gray Ops Spuhr Ring Turret Guards

    Gray Ops Spuhr Ring Turret Guards

    $189.99 Add to cart

            ***Only compatible with Spuhr Rings***

    PURPOSE

    • Added protection for your scope turrets
    • Prevents “rolling a turret” during barricade shooting causing accidental misses and dropped points
    • Requested and designed by top level PRS shooters

    FEATURES

    • Machined from 6061 Aluminum and Hard Black Anodized
    • Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
    • Includes mounting screw hardware
    • Multiple mounting points to get the desired distance from each turret
    • Lightweight, Low-profile, but also strong enough to “load” into
  • SPUHR A-0032 PICATINNY RAIL H14 L75 MM

    $82.99 Read more

    Article no.: A-0032

    Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz
  • SPUHR SP-5001 Ø35 H30mm 0MIL PIC

    $559.00 Add to cart

    Article no.: SP-5001

    0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 6.5 mm/.255″ (from the bottom of the tube to bridge of the mount body) Length: 126 mm/4.96” Weight: 239 g/8.4 oz 10-degree wedge included
  • SPUHR SP-4601C Ø34 H30mm 6MIL PIC

    $559.00 Read more

    Article no.: SP-4601

    6 MIL/20,6 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 227 g/8.0 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting.
  • SPUHR A-0001 4 MM SPACER

    $41.99 Read more
  • SPUHR Separate Rings SR-4000 Ø34 H25.4MM PIC

    $469.00 Read more

    Article no.: SR-4000

    Height: 25.4 mm/1” Length: 32 mm/1.26” Weight: 183 g/6.5 oz Includes the A-0080/81 Leveling Kit
  • Gray Ops CNC Precision Scope Mount 34mm dia. / 1.26″h

    $539.00 Add to cart

    Designed for shooters, by shooters.  This mount encompasses everything needed for ultimate consistency and reliability.  Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.

    FEATURES:

    • 7075 Aluminum
    • Integrated recoil lug
    • Steel thread reinforced cross bolt holes
    • Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
    • Type III Hard coat Anodize
    • Multiple accessory locations with unique V-Groove self-aligning design
    • All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed

    Weight: 7.9 Oz

    Outside Length: 4.85”

    Inside Length: 2.55”

    Finish: Flat Black

    T25 Plus Torx Bit included

    Accessories sold separately

  • SPUHR 20-PACK RING SCREWS TOP COVER SCREWS

    $14.99 Read more

    Article no.: P-100

    A-0132 M4x10 Tx20 screws for new style top covers (20-pack). The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Note: for Top Covers with with 4-letter batch numbers and batch numbers from M13/XX forward.
Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!