Showing 1–21 of 33 results

Filter
  • MPA Brass Catcher

    $219.99 Read more

    Tired of losing brass at your PRS, NRL or Club/Regional Series event? The MPA Brass Catcher is designed for you….

    Attaches via the scope base pic rail on your bolt gun. The wire frame that holds the pouch is adjustable “front to back”and “up and down.”

    Subtle adjustments can also be made to the wire frame to get the exact fit you want.

    The hinge will position the brass catcher closed (up against the ejection port) or open (90 degrees to the ejection port) for easy removal of the brass after your stage.

    Holds 15+ pieces of full size short action caliber brass (308, 6.5 & 6mm Creedmoor, etc) or more of smaller brass types such as 6BR, 6BRA, Dasher, etc.

    Works only with short action cartridges.

  • Gray Ops Hornady OAL and Comparator Block
  • Insite Arms Loading Block 100 ct. Block

    $159.99 Select options

    Milled from a solid 13.75″ 1″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 6 pounds this block is solid and doesn’t move when bumped or jarred

    • 5 size options for cartridge chamberings

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 13.75″x 6″x 1″

     

  • Gray Ops Outdoorsman Arca Adapter

    Gray Ops Outdoorsman Arca Adapter

    $54.99 Add to cart

    NOTES:

    • This product only works with Outdoorsmans Binocular Mounts and is specifically designed with custom anti-rotate pins for exact fitment.
    • Does not include Outdoorsmans Binocular Mount

    PURPOSE:

    • Attach to bottom of Outdoorsmans Bino Mounts for a true Anti-rotate arca adapter

    FEATURES:

    • Machined from 6061 Aluminum
    • Hard Black Anodizing
    • 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
    • Works with any standard 1.5” Arca clamp
    • Low profile design
    • Custom machined anti-rotate pins to fit Outdoorsmans Bino Mount
    • Includes “captured” 1/4-20 screw
  • Insite Arms Loading Block 100 ct. Bullet Tray

    Insite Arms Loading Block 100 ct. Block with Bullet Tray

    $199.00 Select options

    Milled from a solid 18″ 1″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred

    – Includes a generous sized Bullet or Parts tray for convenience.

    • 5 size options for cartridge chamberings

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 18″x 6″x 1″

     

  • Gray Ops MPA BA Adjustable Thumbrest

    Gray Ops MPA BA Adjustable Thumbrest

    $62.99 Add to cart

    Made specifically for the MPA BA Competition chassis.

    • Multiple mounting locations in any of the “Oval” slots down the forend
    • Compatible with or without MPA Internal Weights
    • Made from 6061 Aluminum and hard black anodized
    • Ergonomic thumbshelf contoured for maximum comfort
    • Increased  stability for support hand
    • Ambidextrous for right handed or left handed shooters
  • Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long - MATRIX FIT with Screws

    Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)

    $259.99 Add to cart

    Get the perfect balance with External forend weights.  Designed for M-Lok chassis with configurations similar to the MPA Matrix.

    FEATURES

    • Black Nitride finish
    • Integral Flush cup
    • Shaped to be support hand friendly during push/pull/press positional shooting
    • Compatible with MPA internal weight kits on Matrix
    • Full kit (6 weights) includes 4 short weights and 2 long weights
    • Full kit adds just over 2.5 pounds (41 oz.)
    • Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
    • Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)

    Available with all M-Lok Hardware

    • Short Pair (2 Short weights)
    • Long Pair (2 Long weights)
    • Full Kit (4 Short weights and 2 Long weights)

    Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)

    • Short Pair (2 Short weights)
    • Long Pair (2 Long weights)
    • Full Kit (4 Short weights and 2 Long weights)
  • Gray Ops AMP Annealing Block

    $77.99 Read more

    FEATURES

    • Machined from 6061 Aluminum
    • Holds up to 6 AMP Annealing Pilots and 1 Brass Case holder
    • Compatible with Gray Ops Reloading Base Stand

    INCLUDED

    • AMP Annealer Organization Block
    • 4 Rubber Feet
  • Gray Ops Shell Tray Block
  • Gray Ops Shell Holder Block
  • Gray Ops Die Block
  • Insite Arms Loading Block 100 ct. Bullet Tray

    Insite Arms Loading Block 100 ct. Each Side Used for different Case Sizes- 2″ THICK BLOCK

    $249.99 Select options

    Milled from a solid 14″ x 2″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    This Block can accommodate holes for cartridges on both sides Top and Bottom. This allows the block to be used for 2 different sized cartridges.

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred

    – Includes a generous sized Bullet or Parts tray for convenience.

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 14″x 6″x 1″

     

     

  • Gray Ops Bushing Block
  • Redding – Heat-Treated Steel Neck Sizing Bushing 0.335″

    $28.99 Add to cart

    Redding – Heat-Treated Steel Neck Sizing Bushing

    Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.

  • Micron Precision Series – Threaded Seater & Sizer Die Set – 6mm Dasher

    $829.00 Read more

    Micron Precision Series – Sizer  & Seater Die Set

    • Each die blank is caliber specific in length
    • JGS resize reamers are used to chamber the dies
    • Sub 0.0002″ runout from OD to bushing pocket and die chamber
    • Hand polished and inspected before surface treatment
    • All dies come with a bushing retainer cap for full neck sizing. Bushing retainer caps for partial neck sizing sold separately
  • Redding – Heat-Treated Steel Neck Sizing Bushing 0.336″

    $28.99 Add to cart

    Redding – Heat-Treated Steel Neck Sizing Bushing

    Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.

  • Redding – Heat-Treated Steel Neck Sizing Bushing 0.334″

    $28.99 Add to cart

    Redding – Heat-Treated Steel Neck Sizing Bushing

    Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.

  • Redding – Heat-Treated Steel Neck Sizing Bushing 0.289″

    $28.99 Add to cart

    Redding – Heat-Treated Steel Neck Sizing Bushing

    Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!