-
Vihtavuori Premium N560 Reloading Powder – 1kg
$169.00 Read moreTHE N560 RIFLE POWDER
Vihtavuori’s N560 rifle powder is especially suitable to bring power to large and magnum calibers, for example .270 Winchester, 6,5-284, 7 mm Remington Magnum, 7 mm Weatherby Magnum and even the .416 Rigby. This rifle powder is also very good choice for handloading the .338 Lapua Magnum when using lighter bullets of 250 grains or less.
The N560 powder is a tubular type with a fairly large grain with dimensions of 1,4 mm length and 1,2 mm diameter. The burn rate of is slow on the scale of our rifle powders, between the N160 and N165. The N560 is similar to N100 series, but nitroglycerine has been added to it to get better energy content. The 500 series High Energy powders are mainly used in rifle cartridges where some extra energy content is needed to achieve bigger loading densities and higher muzzle velocities within the limits of maximum pressure. So, you get better velocity with the same pressure than with for instance the N165. The N560 is commonly used for big game hunting and sniper ammunition especially for larger caliber rifles. Especially in long distance hunting situations with reasonable calibers and bullets, the N560 magnum powder shows unbelievable performance.
RELOADING RCOMMENDATION BY OUR PROS
The N560 is one of the best powders for 6,5-284 when loaded with heavy bullets – try this when the velocity counts!
The Vihtavuori N560 rifle powder comes in 1 lbs and 1 kg bottles as well as 8 lbs containers.
-
Peterson 300 Norma Brass Cases ( 250ct ) Bulk Bag
$799.00 Read morePeterson Cartridge Co. of Pittsburgh, PA today announced the addition of .300 Norma Magnum to its growing family of rifle casing calibers.
When Peterson Cartridge set out to produce .300 Norma Magnum casings (which it recently introduced) it also added .338 Norma Magnum to the Tooling Development schedule. The .338s are now available, and initial test results are excellent.
According to Derek Peterson, president of Peterson Cartridge, “Our development goal for both of the Norma Magnum calibers was to produce casings that outperform the competitor’s product … and we did it. We make our Norma Magnums with a harder head. Our casings tolerate higher pressure. And you’ll get more reloads from Peterson casings.”
When Peterson produces a casing in a new caliber for the first time, it performs an extensive list of Quality Assurance tests and trials before making it available for sale. One of those trials involves the following:
- Load 5 cases at certain percent above Max pressure and fire each five times.
- Take 3 of those casings, increase the pressure, and fire each, five more times.
- Take one of those casings, increase the pressure again, and fire that casing 10 more times.
After running this protocol on the new .300 Norma Magnums Peterson’s ballistician reported the following:
- Standard Deviation on muzzle velocity was single digit.
- There was no detectable heavy-bolt-lift, sticking in the rifle, primer gas leaks, blown primers, cracked necks or bodies, or case-head-separation signs throughout testing.
- Primer pocket removal force showed only very minor reduction due to pockets opening up.
After firing the last case 20 times, at above recommended powder levels, the case appeared the same as it did after the third firing. The ballistician concluded, “These cases were found to be strong, durable, well-made cases that should satisfy the most discriminating shooter.”
-
Redding – Heat-Treated Steel Neck Sizing Bushing 0.335″
$28.99 Read moreRedding – Heat-Treated Steel Neck Sizing Bushing
Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
-
LAPUA – .243 WIN MATCH RELOADING CASES – BOX OF 100
$154.99 Read more.243 Winchester brass – a true legend
The 243 Winchester is the legendary mild recoil caliber for todays small game hunting. The .243 Winchester case has all the world famous qualities of Lapua’ s unrivaled .308 Winchester brass -
LAPUA 22-250 4PH5001 Rem Reloading Cases 100ct.
$154.99 Read more100 cases
New brass in 2018 by Lapua – the .300 Norma Magnum case
A recent development based on the .338 Norma Magnum necked down to .30 caliber, the .300 Norma Magnum was adopted as the US military’s Advanced Sniper Cartridge “for extra long ranges beyond 1 500 meters”. In addition to its military duties, the .300 Norma brass is sure to find favor with Long Range competitive shooters and hunters. -
Hornady LOCK-N-LOAD OAL GAUGE
$60.00 Add to cartThe Lock-N-Load® O.A.L. Gauge is universally acclaimed as the most accurate, easy-to-use and reliable method of regulating seating depth and the resulting “jump” to the rifling. conditions.
Made In United States of America
-
Peterson 6XC Brass Cases ( 50ct ) SRP
$98.99 Add to cartDavid Tubb, owner of Superior Shooting Systems originally conceived and designed the caliber 6 XC. Tubb has won almost 30 different rifle championships and has proved to the world that the 6 XC is a highly effective, flat shooting caliber.
More than a year ago Tubb contacted Peterson Cartridge and asked if the team at Peterson could develop a tool pack to make 6 XCs. After months of tooling development and experimentation Peterson produced its first run. According to Derek Peterson the company’s president and head tooling designer, “Lots of shooters purchased these 6 XCs, shot them and complimented them highly.”
But Tubb reached out to Peterson to say he wasn’t happy with them. He wanted more internal volume. So Peterson went back to work and redesigned the tool pack. After more months of tooling revisions and experimentation Peterson produced its second iteration of 6 XCs.
David shot those second-iteration casings and reported to Derek, “Ok, you achieved the original goals I asked for, and these are every bit as good as those made by the European incumbent. But here’s the thing. Their casings are known to have soft heads that don’t hold up well to numerous reloads. Can you make a third iteration that has harder heads? Oh … and can you make a version in small rifle primer size also?”
So Derek went back to work and produced a third version that closely matches the internal volume of the European cases but with much harder heads. After shooting these, David declared them to be the best 6 XCs out there. This is the version Peterson produces today, in both large and small rifle primer size.
Peterson concluded, “Give them a try, and see if you agree.”
Additional Information
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
-
Redding – Heat-Treated Steel Neck Sizing Bushing 0.336″
$28.99 Add to cartRedding – Heat-Treated Steel Neck Sizing Bushing
Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
-
-
Micron Precision Series – Threaded Seater & Sizer Die Set – 6mm Dasher
$829.00 Read moreMicron Precision Series – Sizer & Seater Die Set
- Each die blank is caliber specific in length
- JGS resize reamers are used to chamber the dies
- Sub 0.0002″ runout from OD to bushing pocket and die chamber
- Hand polished and inspected before surface treatment
- All dies come with a bushing retainer cap for full neck sizing. Bushing retainer caps for partial neck sizing sold separately
-
LAPUA – .22-250 REM. RELOADING CASES – BOX OF 100
$149.99 Read moreLapua LU4PH5001 .22-250 Rem Cases 100/box
The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
The most precise cases on the marketLapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
Lapua cases are manufactured to be reloaded, again and again, dozens of times.
Case construction
Base
The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
Body
The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
Neck
Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading. -
Gray Ops Extra Reloading Stand “ARM”
$12.99 Add to cartFor those who are taking their “Reloading Stand” to the next level and need an extra “Arm”
-
Peterson 300 Norma Brass Cases ( 50ct )
$195.00 Add to cartPeterson Cartridge Co. of Pittsburgh, PA today announced the addition of .300 Norma Magnum to its growing family of rifle casing calibers.
When Peterson Cartridge set out to produce .300 Norma Magnum casings (which it recently introduced) it also added .338 Norma Magnum to the Tooling Development schedule. The .338s are now available, and initial test results are excellent.
According to Derek Peterson, president of Peterson Cartridge, “Our development goal for both of the Norma Magnum calibers was to produce casings that outperform the competitor’s product … and we did it. We make our Norma Magnums with a harder head. Our casings tolerate higher pressure. And you’ll get more reloads from Peterson casings.”
When Peterson produces a casing in a new caliber for the first time, it performs an extensive list of Quality Assurance tests and trials before making it available for sale. One of those trials involves the following:
- Load 5 cases at certain percent above Max pressure and fire each five times.
- Take 3 of those casings, increase the pressure, and fire each, five more times.
- Take one of those casings, increase the pressure again, and fire that casing 10 more times.
After running this protocol on the new .300 Norma Magnums Peterson’s ballistician reported the following:
- Standard Deviation on muzzle velocity was single digit.
- There was no detectable heavy-bolt-lift, sticking in the rifle, primer gas leaks, blown primers, cracked necks or bodies, or case-head-separation signs throughout testing.
- Primer pocket removal force showed only very minor reduction due to pockets opening up.
After firing the last case 20 times, at above recommended powder levels, the case appeared the same as it did after the third firing. The ballistician concluded, “These cases were found to be strong, durable, well-made cases that should satisfy the most discriminating shooter.”
-
Vihtavuori Premium N150 Reloading Powder – 3.5 KG
$459.00 Read moreVIHTAVUORI N150 MULTIPURPOSE RIFLE POWDER
Vihtavuori’s N150 multipurpose rifle powder is one of our most popular reloading products. It is commonly used with heavier bullets in accuracy loads and hunting loads in cartridges with middle case volumes, like the .30-06 Springfield, the .308 Winchester and the 6,5×55 SE. The N150 is one of, if not the best, all-rounder powder for European hunting calibers.
N150 is a tubular powder type with grain dimensions of 1,3 mm length and 1,1 mm diameter and the nearly symmetrical shape makes it a good companion for all kinds of reloading equipment. The burn rate of the N150 is on the medium scale of our rifle powders. It is also one of our most temperature insensitive powders, and thanks to the added decoppering agent, the coppering of the rifle barrel is minor even when using copper bullets.
Reloading recommendations from our pros
- The N150 is a perfect solution for .308 Win cartridges with Lapua Naturalis bullets. Excellent velocity and shooting accuracy is guaranteed with almost all barrel lengths on the market.
- For moose hunters we recommend trying the load of 2,75 g / 42.4 grs
- For 6,5×55 SE applications, N150 gives a good variety of options with 6,5g / 100 gr – 9,0 / 139 gr bullets and shooting distances up to 800 meters!
-
Peterson 6.5 PRC Brass Cases ( 50ct )
$144.99 Add to cartDeveloped by George Gardner of G.A. Precision and based off the Ruger Compact Magnum case, the 6.5 PRC was created for use in the Precision Rifle Series matches. This new cartridge quickly gained favor as some dubbed it a magnum version of the 6.5 Creedmoor. Big game hunters also took notice of the 6.5 PRC’s ability to approach .264 Winchester Magnum and 6.5-300 Weatherby’s performance, while using less powder and generating less recoil.
Derek Peterson, President of Peterson Cartridge states, “The 6.5 PRC is well suited for PRS competition, allowing competitors to send heavy for caliber projectiles at velocities just under the 3,200 FPS speed limit for PRS.” Peterson continues, “Big game hunters have also discovered that the 6.5 PRC effectively bridges the gap between the 6.5 Creedmoor and the larger magnums such as the 6.5-300 Weatherby, 6.5 Remington Magnum and the .264 Winchester Magnum. We were not satisfied with the brass on the market for the 6.5 PRC, so we made our own with the same consistent internal volume and durability as the rest of our casings. We hope you like them.”
-
Peterson 6XC Brass Cases ( 50ct ) LRP
$98.99 Add to cartDavid Tubb, owner of Superior Shooting Systems originally conceived and designed the caliber 6 XC. Tubb has won almost 30 different rifle championships and has proved to the world that the 6 XC is a highly effective, flat shooting caliber.
More than a year ago Tubb contacted Peterson Cartridge and asked if the team at Peterson could develop a tool pack to make 6 XCs. After months of tooling development and experimentation Peterson produced its first run. According to Derek Peterson the company’s president and head tooling designer, “Lots of shooters purchased these 6 XCs, shot them and complimented them highly.”
But Tubb reached out to Peterson to say he wasn’t happy with them. He wanted more internal volume. So Peterson went back to work and redesigned the tool pack. After more months of tooling revisions and experimentation Peterson produced its second iteration of 6 XCs.
David shot those second-iteration casings and reported to Derek, “Ok, you achieved the original goals I asked for, and these are every bit as good as those made by the European incumbent. But here’s the thing. Their casings are known to have soft heads that don’t hold up well to numerous reloads. Can you make a third iteration that has harder heads? Oh … and can you make a version in small rifle primer size also?”
So Derek went back to work and produced a third version that closely matches the internal volume of the European cases but with much harder heads. After shooting these, David declared them to be the best 6 XCs out there. This is the version Peterson produces today, in both large and small rifle primer size.
Peterson concluded, “Give them a try, and see if you agree.”
Additional Information
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
-
Redding – Heat-Treated Steel Neck Sizing Bushing 0.334″
$28.99 Add to cartRedding – Heat-Treated Steel Neck Sizing Bushing
Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
-
Redding – Heat-Treated Steel Neck Sizing Bushing 0.289″
$28.99 Add to cartRedding – Heat-Treated Steel Neck Sizing Bushing
Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
-
-
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart