We provide nightforce optics, leupold optics, and bushnell optics.
-
Fix It Sticks Scope Jack
$62.99 Read moreFix It Sticks Scope Jack
A new way to level your optic, the Fix It Sticks Scope jack works with any 1/4 inch driver to quickly and easily level your scope to your NATO/Pic rail.
Just mount the scope jack to the NATO/pic rail under your scope and turn the drive handle until the lifting arm engages with the flat section under your turrets. Once the scope is level, maintain pressure while tightening your ring screws to keep optic level throughout the process.
Requirements:
- Works with any scope with a flat section under turrets
- Needs a minimum of 1/4 inch clearance between NATO/Pic rail and scope
- NATO/Pic rail must be accessible under optic
- In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.
Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Driver.
-
Fix It Sticks Bubble Level Set
$69.99 Read moreLevel your optics with machined aluminum levels, featuring precise UK-sourced bubble vials
Kit includes:
- Magnetic level
- NATO/Pic rail level/anti-cant device
- Protective foam carrier with pouch
-
Gray Ops CNC Garmin Xero Bump Cover – Gun Metal Grey
$43.99 Add to cartThe ONLY way to protect your Garmin Xero Chronograph!Introducing the Gray Ops Garmin Xero Bump Cover- Made from a strong, flexible plastic to withstand all of the punishment a trip in your pack will deliver.
- Easy slip on design with a removable front cover.
- While the front cover is closed the screen and all buttons are protected.
- Easy access to the charging port without removing the Bump Cover
- Bump Cover can stay on the Garmin while in use and will not affect accuracy or reliability.
- This was tested across centerfire rifle, pistol, rimfire, air rifle, and a bow with no differences recorded.
- Compatible with the Gray Ops Garmin Mount and Mount Kits.
Protect Your Garmin with the Gray Ops Garmin Bump Cover
-
MPA BA Bolt Action Mount
$389.99 Select options This product has multiple variants. The options may be chosen on the product pageThe BA Series Mounts are designed to mount high-performance optics onto your Bolt Action rifles with Picatinny Rail Scope Bases. The 1″ & 30mm versions have a center line height of 110%. 34mm models offer push-button fit for either aluminum or steel rails, while 35 mm and 36-inch long scopes can use the standard mounting hole pattern at either end, which measures 125 mils +/- .0015″. This interface ensures positive engagement on both spec positions and specs ones, so you don’t need specialized tools!
-
Arken Optics 5-25X56MM FFP VPR MIL EP5-5251VPR
$699.00 Read moreEP5
5-25X56 FFP Illuminated VPR – Zero Stop – 34mm Tube
Arken Optics products are designed to combine quality, performance
and precision with tremendous value. The EP is a FFP (First Focal Plane)
optic that features Japanese ED glass to enhance clarity and minimize
dispersion. The Arken EP is outfitted with our AZS (Arken Zero Stop)
and incorporates adjustable elevation and windage turrets with tactile
and audible clicks. These turrets are 10 MIL/25 MOA per revolution. -
Gray Ops CNC Garmin Xero QD Mount KIT (Mount, Extension Arm, and QD Throw Lever Arca Clamp)
$289.00 Add to cartGarmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp
PURPOSE
- The Gray Ops Garmin QD Mount was designed to be the most versatile, user configurable mount on the market for the Garmin XERO C1 Pro Chronograph.
- Quickly and reliably attach/detach to any Picatinny Rail system or Arca clamp with our new patent pending QD system.
- Multiple Mounting Options allows you to tailor the Garmin to your exact needs on the fly.
NOTES
- Comes in 3 configurations
- Garmin QD Mount: Mount Only
- Garmin QD Mount w/ Arm: Mount, Extension Arm, buyer provides their own ARMS 17 compatible arca clamp
- Garmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp
-
SPUHR M5X35 TX20 CLAMPING SCREWS
$19.99 Read moreArticle no.: A-0150
M5x35 Torx 20 screws for the side clamp (5 pcs) on SP-***1 mounts. The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Includes SS washers. -
Gray Ops CNC Garmin Xero QD Mount (Mount Only)
$115.00 Add to cartGarmin Mount Kit: Mount Only
PURPOSE
- The Gray Ops Garmin QD Mount was designed to be the most versatile, user configurable mount on the market for the Garmin XERO C1 Pro Chronograph.
- Quickly and reliably attach/detach to any Picatinny Rail system or Arca clamp with our new patent pending QD system.
- Multiple Mounting Options allows you to tailor the Garmin to your exact needs on the fly.
NOTES
- Comes in 3 configurations
- Garmin QD Mount: Mount Only
- Garmin QD Mount w/ Arm: Mount, Extension Arm, buyer provides their own ARMS 17 compatible arca clamp
- Garmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp
-
US Optics Ext Cant Indicator Rail Mounted Swivel Bubble Level BBL
$174.99 Read moreUS Optics Ext Cant Indicators with Swivel Bubble Level available for Picatinney or Weaver (Rail Mounted Style) and 30mm Rings (Ring Mounted). Screw on cover protects glass vial from damage when not in use. Those Riflescope Ext Cant Indicators by U.S.Optics include cover. USO Rail Mounted Swivel Bubble Level Ext Cant Indicator (Contoured) attaches to your Picatinny Base. U.S. Optics Ring Mounted Swivel Bubble Level Ext Cant Indicator attaches to your 30mm scope tube. Screw on cover of those USOptics Ext Cant Indicators protects the glass vial from damage when not in use. Level folds away 90 degrees when not in use. Made from 6061-T6 and Type III Hard Black Anodized.
-
Sale! Out of stock
Bushnell LEGEND TACTICAL 15-45x 60mm T Series Mil-Hash -781545ED
Original price was: $899.00.$869.00Current price is: $869.00. Read moreBuilt on the groundwork laid by Bushnells original Excursion FLP spotting scopes, the new Legend T Series 15-45x 60mm FLP Spotting Scope with Mil-Hash line reticle delivers exceptional field performance, a bright razor sharp image and a 100% waterproof design that excels in the most unforgiving conditions. The Folded Light path (FLP) design provides the benefits of a long focal length optical path in a relatively short, compact chassis. The ED Prime Extra Low Dispersion glass, fully multi-coated optics, and premium BaK-4 Prisms capture the moment with vivid clarity and contrast, even in low light conditions. Lenses are protected by the ultra-effective Rainguard HD hydrophobic coating, for the clearest possible view in the face of foul weather or condensation from breath. The compact design is lightweight and sets up quickly and easily. It features a reverse eyepiece for minimal exposure and a twist-out eyecup for comfort and optimal eye relief. It also has tactical rails on the top and sides. Features the new Bushnell No Questions Asked Lifetime Warranty. Includes nylon protective in use case and lens caps.
Features:
- Mil-Hash Reticle
- Twist-up eyecups
- Picatinny rail mounts
- 100% waterproof
- Rainguard HD
- Mil-Hash reticle
- First focal plane
-
Nightforce Clamp On Power Throw Level For ATACR/SHV Scopes
$86.00 Add to cartThe Nightforce power throw lever makes magnification changes fast and easy in all positions and conditions. The PTL fits ATACR, SHV 14x, SHV 20x riflescopes.
-
HawkHill Customs Rifle Mounted Data “Dope” Card Holder RMD – Picatinny Mount
$169.99 Read moreThe Hawk Hill Custom “RMD” or Rifle Mounted Data-Holder, also known as a DOPE holder, is designed to revolutionize target data management. Our flexible design with multi axis rotations allows target data and information to be easily viewed without changing shooting position. The RMD’s rugged construction will hold up to the demands of competition shooting as well as the toughest hunting, field and combat conditions. Kydex panel easily folds away when not in use to prevent injury or snagging.
Included with product:
⢠300 mil pvc card and marking pencil to write directly on card. Won’t wash off in rain, but wipes away easily.
⢠Industrial strength velcro for attaching various objects to card.
Key features:
⢠Mounts to Picatinny rail with no tools
⢠Rugged, yet light weight 7075 aluminum
⢠MIL-A-8625F TYPE III Hardcoat Anodize
⢠All Stainless Steel Hardware
⢠Detent click multi-axis rotation
⢠Coated stainless external screws for a blacked-out look and extreme corrosion resistance.
*Tips for displaying data on the RMD – the included white card and marking pencil are a great way to view data. Pencil easily wipes off with a cloth or even a finger but won’t wash off when shooting in the rain.
Our preferred way to apply data to the RMD is with a strip of masking tape and a sharpie marker. There are many ways to use the RMD, these are only few we’ve found to be helpful.
-
-
SPUHR A-0037 PICATINNY RAIL H20 L75 MM
$82.99 Read moreArticle no.: A-0032
Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz -
Gray Ops CNC Precision Scope Mount Bubble Level
$81.00 Read moreEliminate rifle “cant” with the direct attach bubble level designed specifically for the Gray Ops CNC Precision Scope Mount. When attached via our tight locking V-Groove design, this bubble level is visible just over the left or right side scope parallax/windage knob when viewing through the scope. Making it easy to stay in the scope and still view the bubble level. Mounts on either the left or right side of the ring accommodating both left and right handed shooters.
(mounting screws included)
Weight: 0.3 Oz
-
SPUHR SP-4001C Ø34 H30mm 0MIL PIC
$559.00 Read moreArticle no.: SP-4001
0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion. -
Gray Ops CNC Precision Scope Mount 34mm dia. / 1.26″h
$539.00 Read moreDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Nightforce X-Treme Duty™ Ultralite™ Rings – 4 Screw
$226.00 – $253.00 Select options This product has multiple variants. The options may be chosen on the product pageX-Treme Duty™ Ultralite™ Rings are crafted of machined 7075-T6 hard anodized aluminum, with titanium cross bolts and jaws, and 4 titanium screws. This craftsmanship gives you the performance of steel at half the weight.
-
Hawkins Precision Ultra-Light Tactical Scope Rings 30mm Low 0.885 Height
$239.00 Read moreUltra-Light Tactical Scope Rings
Ultra-light tactical scope rings from Hawkins Precision are made in the USA out of billet 6061 T6 aluminum. These fully machined rings are robust and feature a corrosion-resistant black anodized finish. Machined with a clamp and recoil lug made from 7075 aluminum, these scope rings deliver extra strength and grip. The ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm, 34mm and 35mm, sized in low, medium, and high. Rings can be ordered with a center anti-cant level, or an offset level.
Torque Specs: 25 in-lbs ring caps / 65 in-lbs cross bolts
size Measurement from Picatinny Rail to optical center30mm 34mm 35mm Application low .885″ * * 50mm objective with standard barrel contours medium 1.0″ * * 56mm objective with standard barrel contours high 1.25″ * * 50mm objective with AR style front forend X high 1.375″ * 56mm objective with AR style front forend -
Gray Ops CNC Accessory Pic Rail – Long
$109.99 Add to cartLong picatinny rail for Precision Scope Mount accessory interface (screws included)
Attaches to multiple V-Groove interface locations. Tightly and repeatably aligns to the mount.
Length: 4.12″
Height above Mount: 1.00″
Weight: 1.9 Oz
Suggested Torque: 50 in-lb
