-
MasterPiece Arms BA Comp Chassis – MPA Rem 700 Short / Long
$1,390.00 – $1,590.00 Select options- This chassis will fit Remington 700, Defiance Deviant, Bighorn TL3, Surgeon 591, Curtis Custom, and Impact Precision Short Actions.
-
MasterPiece Arms ( MPA ) Mag Feed Lip Adjustment Tool
$18.00 Read moreDescription
This tool comes in handy when adjustments are needed to the feed lips of your metal AR15, AR15 or Bolt Action Box Magazines to improve feeding.
If your feed lips get tweaked, if you drop your magazine or simply have feeding issues due to feed angle of your loaded cartridge, then use this tool to make the necessary adjustments.
There is a single cut on the tip of the adjustment tool to engage the feed lips of these two types of magazines.
As a top ranked PRS shooter stated:Â âNo more ruining your mags by trying to adjust them with a multi-toolâ. I know Ive jacked up several of them so I sure others have also.â
Made from Aluminum, Cerakoted Black, and will not scar or scratch your mag finish.
-
Rem 700 Diamond Trigger
$339.99 – $364.99 Select optionsThe TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.
Intended UsePrecision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.
-
Bix’n Andy Competition 700 NO SAFETY
$549.00 Read moreIntroducing the pinnacle in precision shooting triggers! The Bix n Andy Remington 700 trigger uses a unique ball bearing mechanism that allows for trigger pull weight adjustments 1 ounce (30 grams) to 25 ounces (700 grams). The consistency of the Bix N Andy trigger break is within 0.03 ounce! The upward force on the top sear is the lowest in the industry. Also, the let-off is so crisp and consistent it never fails to amaze shooters who have become accustomed to the world s next leading brands like the Jewell. This Bix N Andy trigger has been made to the highest standards and we trust it will be the best trigger you have ever owned. It is a patented design manufactured in Austria with the latest high-tech equipment giving you the finest trigger available in rifle shooting today. This Bix N Andy Competition Trigger is a direct drop in for the Remington Model 700 Action and comes with installation directions, adjustment tools and a small assortment of spares. The upgraded sear insert installed into the top of the trigger allows for some minor trigger timing adjustments due to the fact that firing pin fall changes depending on the direction the insert is facing when installed. All triggers are set for standard centerfire benchrest applications. The second position however, is a favourite among the rimfire shooting community. Bix n Andy triggers were in the winners circle at the latest 2013 NBRSA Nationals and the 2013 World Championships in Australia. More and more top shooters are making the move to this exceptional upgrade for their rifles. *** All installations of this trigger must be carried out by a competent gunsmith and with weapon unloaded and pointed in a safe direction. Failure to adhere to this warning can result in serious injury and/or death ***
-
Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) SHORT Action
$299.00 Add to cartHawkins Precision M5 Detachable Box Magazine Rifle Bottom Metal is designed specifically for precision shooting. CNC-machined from a single piece of billet aluminum, this precision rifle bottom metal incorporates a barricade stop in front of the magazine well, and has a drafted magazine port. Our M5 DBM also includes a patented cantilever spring release that will not open under recoil. The M5 DBM is also available with a forward Picatinny rail attachment to attach a bipod, barricade stop, or tripod providing solution to create a stable shooting position in any environment.
- Fits Remington 700 and Remington Clone actions.
- Fits M5 inlets.
- Uses AICS magazines.
- Short-action version will work with AW magazines if your action is cut accordingly.
- Comes standard with action screws and bedding pillars.
- Available in Short Action, Defiance XM, Long Action, and CIP/CIP+ Length 338 Lapua
- If you’re looking for XM Lone Peak Bottom Metal, please contact Lone Peak Arms directly.
-
Bix’n Andy TacSport PRO Rem700 Two Stage Trigger – Top Safety (Left or Right)
$439.00 Select optionsThe TacSport Pro is the latest addition to our TacSport line. It was developed to meet the growing needs of our customers that wanted a trigger that was great in rugged condition like our TacSport and also has an even lower pull weight. Designed to operate in Remington 700 and compatible actions, the new triggers will have an adjustable pull force between 3.5 ounces to 35 ounces (100 grams to 1,000 grams). The ball system allows for the lowest reset force of any trigger, thereby improving accuracy and allowing for a very crisp let-off. The TacSport is machined from stainless steel with a housing designed to further protect the mechanism from the elements and will come standard with a safety lever and a removable bolt stop.
-
737R Action .308bf THIS ITEM IS CURRENTLY LIMITED AVAILABILITY – WE DO HAVE SOME STOCK ON HAND AND STANDING ORDER – PLEASE CALL OR EMAIL FOR AVAILABILITY
$2,080.00 Read moreChoose the action that the pros use! We were the 2nd most popular action In the Precision Rifle Series for the 2017 season. Don’t settle for pinned rails or recoil lugs. Our receiver body is a made out of one single piece of material, ensuring the most rigid end product with no chance of warping or your rail coming loose when you need it most.
Use this action/bolt for the following calibers: 22 Creed, 22×47 Lapua, 6 BR, 6 BRA, 6 Dasher, 6 BRX, 6×47, 6 Creed, 6XC, 6SLR, 6.5×47 Lapua, 6.5 Creed, .308 Win. This is not a complete list of calibers that the .308 bf uses but we have listed these in an effort to answer any questions you may have about which action/bolt face is right for your build.
-
MasterPiece Arms ( MPA ) Cheek Riser Pad
$13.99 Read moreProduct DetailsThis is a replacement Cheek Riser Pad. Self Adhesive and Laser Engraved with MPA Logo.
-
BIX’N ANDY TRIGGER TAC SPORT TWO STAGE LEFT OR RIGHT TOP SAFETY FOR REMINGTON 700 AND CLONES
$369.00 Select optionsFor the first time Bix’n Andy comes to the sporting and tactical rifle with the TacSport Rem700 Trigger Pull Force can be set as low as 10 ounces and all the way up to 4.5 pounds Extra Feature: To work the safety move it slightly outwards and then forward. This can be changed so you only have to push it forward by removing a pin. The Bolt Stop Release is removable Available in Single & Two-Stage configurations as well as Left or Right Top Safeties in each configuration. THIS IS THE TWO STAGE MODEL AT THIS TIME WE DON’T RECOMMEND THESE TRIGGERS FOR SURGEONS AND BIG HORN TL-3. THERE HAVE BEEN ISSUES WITH THE SEAR ENGAGEMENT.
-
MasterPiece Arms Matrix Chassis
$1,780.00 – $1,969.00 Select optionsThis is and enhanced version version of our highly successful BA Chassis System.
The Matrix Chassis was designed as a the most revolutionary chassis ever produced. With the multitude of configurations in grips, thumb rests and trigger finger supports, the primary interface between the shooter and the rifle (the grip) has over 100 different options. Please refer to the photos above to see our data on shooter preference on the grips, thumb rests, and trigger finger supports.
-
Bix’n Andy TacSport PRO Rem700 Single Stage Trigger – Top Safety (Left or Right)
$399.99 Select optionsThe TacSport Pro is the latest addition to our TacSport line. It was developed to meet the growing needs of our customers that wanted a trigger that was great in rugged condition like our TacSport and also has an even lower pull weight. Designed to operate in Remington 700 and compatible actions, the new triggers will have an adjustable pull force between 3.5 ounces to 35 ounces (100 grams to 1,000 grams). The ball system allows for the lowest reset force of any trigger, thereby improving accuracy and allowing for a very crisp let-off. The TacSport is machined from stainless steel with a housing designed to further protect the mechanism from the elements and will come standard with a safety lever and a removable bolt stop.
-
Rem 700 Special Trigger
$249.00 Select optionsThe Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any right-handed Remington 700 model rifle.
Intended Use
Competition, precision shooting, military, law enforcement, long range hunting, rugged hunting, harsh environments operations, target shooting, varmint hunting.
-
Rem 700 Diamond Trigger LH Pro Curve
$369.99 Read moreThe TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.
Intended UsePrecision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.
-
MasterPiece Arms ( MPA ) Ultra Bag Rider
$59.99 Read moreDescription
Our new Ultra Bag Rider combines the benefits of the Enhanced Bag Rider design along with a Butt Hook feature.
This provides a rock solid rear support when using a rear bag when the shooter wants to pull the rifle into the shooters shoulder, improving accuracy performance due to the consistent shoulder pressure applied using this accessory.
The stability this rear bag rider provides is incredible, especially when shooting groups. If youâve ever had some challenges keeping the rifle ultra stable when prone, this accessory will improve performance.
This Ultra Bag Rider works with all BA, BA Comp, ESR, BA Hybrid & BA lite chassis that have a 3 hole pattern on the bottom of the buttstock.
It comes with a black Ultra bag rider, 2 Socket Head Cap Screws, and a turned step shaft designed to be inserted into the monopod slot for installation purposes.
This part is molded and has a lifetime guarantee.
-
Bix’n Andy Tikka T3 Precision Trigger – Top Safety RH
$668.99 Read moreThis trigger from Austrian maker Bix’n Andy is designed for use with Tikka T3 & Tikka T3x rifles.
Install one on your rifle and experience the unsurpassed performance you have come to expect from Bix’n Andy!
*** All installations of this trigger must be carried out by a competent gunsmith and with weapon unloaded and pointed in a safe direction. Failure to adhere to this warning can result in serious injury and/or death ***
RIGHT HAND ONLY
-
Gray Ops CNC Bag Stop – Arca Mount
$119.99 Add to cartPURPOSE:
- The bag stop was designed to give shooters the ability to “load” into their shooting bag while also preventing any contact to the mag which can cause feeding issues for the rifle. This is especially helpful for 22LR actions to feed reliably.
FEATURES:
- Mounts directly to any 1.5” arca rail via integral clamp
- Does not need to be “slid off” the end of the rail to remove
- One steel hex bolt for installing/removing or repositioning
- Machined from 6061 aluminum
- Black anodize finish
- Length designed for standard 10 round and extended magazines
- Weight – 2.6 ounces
-
Bix’n Andy – Dakota Trigger, Tikka T3
$319.99 Add to cartThe Bix’n Andy Dakota trigger for the Tikka T3 series of rifles brings you the performance and durability that has raised the industry standard for over 10 years!The searless trigger design delivers the greatest reliability in all conditions. From mud to snow and even the roughest dust storm, this trigger will provide a perfect ignition break.Bix’n Andy had the Badlands of the Dakotas and demands of all American shooters in mind when designing this trigger for the Tikka T3 platform.The Dakota is user adjustable with a single screw adjustment between 1 and 4.5 pounds of precise pull.The Tikka T3 Dakota Trigger comes standard with a safety and bolt release. The housing can be easily opened for cleaning and general maintenance for when you get home from a dusty match or muddy expedition, self-eliminating any doubt your rifle is ready for the next shot.Fully Weather Resistant so that you can perform at your best no matter what mother nature throws at you.Searless Design ensures simplicity and total reliability.Single Stage trigger mechanism with a crisp ignition break.Tikka T3 Series compatibility.Ideal Over-Travel so that you do not interfere with the rifle’s position during fire.Patented Ball Bearing Design with lifetime support guarantee.100% Precision Machined Parts.1 lbs – 4.5 lbs or 450g – 2,000g Pull Weight adjusted by a single screw while the action is still bedded in the stock. -
MasterPiece Arms ( MPA ) 2 round Magazine Extension
$49.00 Add to cartDescription
MPA Mag Extender is designed for 308 Box magazines built by AICS or Accurate Mag â single feed only. (Will not work with AW Mags). Simply remove the existing floorplate, remove the base insert (from the Accurate Mags only), depress the spring into the mag body, slide the mag extender in place and secure with the included 6-32 set screw. Make sure the mag spring has seated itself flush with the bottom of the mag extender.
Produced from 6061 Aluminum. Cerakote Black  and laser engraved.
Increases the magazine capacity to 14 rounds.
Specify Magazine Type (Accurate or AICS)/
There is also a version for 6BR case magazines. To get this extender type, please select the appropriate magazine type on the menu. These 4 Round extenders will work with MPA, Freedom Gunworks and PVA 6BR Kits.
-
MasterPiece Arms BA COMP Chassis COMPLETE Weight Tuning KIT – MPA
$229.99 Add to cartThe Complete Weight Tuning Kit for the full size BA/Comp Chassis & ESR Chassis includes the following:
- Steel Enhanced Bag Rider – 1.2 lbs
- Steel Monopod Weight – 1 lb
- Front Fore-end Weight – 1.2 lbs
- Rear Fore-end Weight – 1 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
- Fasteners for Attaching the Bag Rider and Monopod Weight
-
Shopping Cart