*Made with a heavy duty 3D printed material, tool may have some slight surface imperfections, which is normal.
Showing 1–21 of 25 resultsSorted by popularity
Filter-
Fix It Sticks Single Bits
$3.99 Select options This product has multiple variants. The options may be chosen on the product page1″ Long, 1/4″ Bits. Electroless Nickel Finish
-
Fix It Sticks EXTENDED ACTION BITS 3/16″
$13.99 Read moreCustom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 1/8″ for KIDD, etc.
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
-
Fix It Sticks Pin Punch Set
$28.99 Read moreFix It Sticks Pin Punch Set
Set of Six Pin Punches designed to integrate with the Fix It Sticks System.
Pin Punches are in the following sizes:
- 1/16″
- 3/32″
- 1/8″
- 5/32″
- 3/16″
- 1/4″
Pin Punches work with any standard 1/4″ Driver and are machined from solid bar stock.
-
Sale!
Out of stock
FIX IT STICKS Magnetic Patch
$13.99Original price was: $13.99.$11.19Current price is: $11.19. Read moreMagnetic Patch.
- Easy way to keep track of loose screws / bits when in the field.
- Magnetic patch attaches to front of Fix It Sticks Deluxe Case via Velcro.
- Velcro on the front allows patches to be attached.
- Patch can be used directly on case, or flipped over and used as a tray.
-
Sale!
Out of stock
Fix It Sticks Bench Kit
$549.00Original price was: $549.00.$519.99Current price is: $519.99. Read moreFix It Sticks Bench Top Kit
A full range of Torque Limiters for Home or Shop use.
Includes:
- T-Handle Driver
- Fourteen Torque Limiters (6, 10, 15, 20, 25, 30, 35, 40, 45, 49, 55, 60, 65, and 80 inch lbs)
- Molded Plastic Storage Base that holds T-Handle, Nineteen Torque Limiters, and Forty Eight 1/4″ Bits.
NOTE: Bits are not included
-
FIX IT STICKS REPLACEABLE VERSION – SHOOTING & HUNTING EDITION W/ BRACKET FISRSH16
$49.99 Add to cartThe Fix It Sticks Replaceable Edition Shooting / Hunting offers unmatched portability, functionality and versatility. Two Fix It Sticks (which combine to form a T-Handle) and 16 bits are held in a molded bracket for portability / storage. Extra room on each end can hold two additional bits.
Replaceable Set includes two sticks, bracket, and 16 different bits:
- 2.5mm hex
- 3mm hex
- 4mm hex
- 5mm hex
- T-10
- T-15
- T-20
- T-25
- T-30
- 1/8″ Hex
- 5/64″ Hex
- 3/32″ Hex
- 5/32″ Hex
- 3/16″ Hex
- Slotted #5
- Phillips #1
The ultimate gun maintenance tool. Take the shop tool experience with you on the road.
- High quality steel construction (can withstand 40Nm of Torque)
- Compact
- Durable
- Accepts any standard 1/4″ bit
- Weight: 116 grams
-
Fix It Sticks EXTENDED ACTION BIT PACK – 6 BITS
$59.99 Add to cartCustom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
-
Fix It Sticks 6 Bit Holder – Set of 2
$8.99 Add to cart6 Bit holder holds six 1/4″ Bits. Come in a set of two.
-
Fix It Sticks BRASS HAMMER HEAD
$15.99 Add to cartBRASS HAMMER HEAD
designed to integrate with the Fix It Sticks System. Steel insert in base enables them to be used with magnetic drivers.
Note: T-Handle Driver not included
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
-
Vudoo Bolt Tool
$39.99 Select options This product has multiple variants. The options may be chosen on the product pageAssemble and disassemble all Vudoo rimfire rifle bolts including the 90 degree 2-lug, 60 degree 3-lug, and Single Shot (bench rest) versions.
The Vudoo bolt assembly and disassembly tool was designed to make working with your Vudoo repeater and single shot bolts much easier. The design gives you just the leverage you need to compress the firing pin spring and align the cocking piece with the shroud detent. Can be used to re-cock the bolt, as well as assemble and disassemble all Vudoo rimfire rifles including the 90 degree 2-lug, 60 degree 3-lug, and Single Shot (bench rest) versions.
-
Fix It Sticks CLEANING Brush
$16.99Original price was: $16.99.$14.00Current price is: $14.00. Add to cartCustom cleaning brush bit.
- Works with any standard magnetic 1/4″ driver
- Accepts 8/32 threaded attachments for increased reach
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.
-
Fix It Sticks BRONZE SCRAPER
$14.99 Add to cartCustom all purpose Bronze Scraper bit.
- Accepts threaded 8/32 rods / attachments.
- Comes with a Steel 8/32 insert bit so it can work with any standard magnetic 1/4″ driver
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.
-
Fix It Sticks Brass Pin Punch Set
$44.00 Add to cartSet of Six Pin Punches designed to integrate with the Fix It Sticks System. Steel insert in base enables them to be used with magnetic drivers.
Pin Punches are in the following sizes:
- 1/16″
- 3/32″
- 1/8″
- 5/32″
- 3/16″
- 1/4″
Pin Punches work with any standard 1/4″ Driver and are machined from solid bar stock.
-
Fix It Sticks EXTENDED ACTION BITS 5/32″
$11.99Original price was: $11.99.$9.59Current price is: $9.59. Add to cartCustom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 1/8″ for KIDD, etc.
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
-
Fix It Sticks KNIFE SHARPENER
$31.99 Read moreCustom Bit designed to turn your Fix It Sticks into a portable knife / broadhead sharpener.
Knife Sharpener
- Has both ceramic and carbide V-Style sharpeners
- Both are set at 22.5 degrees for a 45 degree inclusive angle
- Works with any standard 1/4” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
Fix It Sticks STEEL DENTAL PICK
$14.99 Add to cartSTEEL DENTAL PICK
(1)$10.00
Custom Dental Pick Bit.
- Works with any standard magnetic 1/4″ driver
- Has any number of uses: Carbon Scraper, Cotter Pin Puller, Patch Holder, etc.
- Is threaded to accept 8/32 rods.
- Black Isonite finish for increased corrosion resistance and strength
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.
-
FIX IT STICKS – 18 BIT BRACKET for Ratcheting T-Way Wrench with Locking Hex Drive: Version A
$12.49Original price was: $12.49.$9.99Current price is: $9.99. Add to cart -
Fix It Sticks MINI PRY BAR
$12.99 Add to cartCustom Bit designed to make your Fix It Sticks a mini pry-bar
Mini Pry Bar
- Corrosion resistant steel design makes the pry bar strong and durable
- Cut-outs allow the pry bar to be used as a 1/4″, 5/16”, and 3/8” wrench
- Works with any standard 1/4” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
Fix It Sticks BOTTLE OPENER
$8.99 Add to cartBottle Opener Bit
- Happy Hour – Fix It Sticks Style
- Machined from steel barstock
- Works with any standard ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
Fix It Sticks AIMPOINT BIT
$14.99 Add to cartCustom bit designed to aid in the adjustment of Aimpoint Sights.
Aimpoint Adjustment Bit
- Two prong design specifically works with the windage and elevation adjustment knobs.
- Semi-circular wings designed to fit “coin-slot” style adjustment knobs / battery covers.
- Molded synthetic polymer won’t mar or scratch the finish of the sight.
- Metal ¼” Hex Base allows it to work with any ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
AR-15 Accessory Bit Pack FISAR15-ABP3
$34.99 Add to cartThree custom bits designed to aid in maintaining and working on an AR-15. Includes:
- Bolt Carrier Group Scraper Bit
- Castle Nut Wrench Bit
- A2 Front Sight Bit
Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
Can also be used with any standard magnetic 1/4″ Bit Driver
NOTE: Fix It Sticks Not Included