Showing 1–21 of 29 results

Filter
  • BT46-LW17 PSR Atlas Bipod: Standard height with ADM 170-S Lever

    $479.00 Read more
    • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Fore and Aft pivot limiting Bosses*
    • Non-Rotating Legs: outer leg does not rotate around inner leg*
    • Strengthened Leg Boss*
    • Inner Leg constructed from T7075*
    • Weight 13.61 ounces.
    • Footprint spread 8″–11″
    • Available in black only
    • Made in America
  • BT74: Atlas Raider Spike Feet

    $101.18 Read more

    The BT37 Atlas Spike Feet are easily installed with the press of a stainless steel plunger to any V8, PSR or CAL model Atlas Bipod. They deliver a singularly aggressive foot to support the bipod. The Spike portion is approximately 1.45” long with the largest OD of approximately 1”. Sold as a pair. Available in raw stainless with black insert only.

    Weight: 2.7 ounces

    Product will work on V8, PSR and CAL models only.

  • ATLAS BT15: 3.35″ 1913 Picatinny Rail

    $47.10 Add to cart

    The BT15 – 3.35″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78″ and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).

    A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 0.92 ounces

  • ATLAS BT17: 4″ 1913 Picatinny Rail

    $47.10 Read more

    The BT17 – 4″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).

    A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 1.20 ounces

  • ATLAS BT28: AFAR Rail Kit

    $53.90 Read more

    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picatinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.

    The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.

    The 1913 Picatinny Rail is 2.05″ long and has a center to center spacing of 1.6″ with a 1.00″ radius back.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two 3/8″ fasteners and two 1/2″ fasteners. Available in black only.

    • Length: 2.05″
    • Weight: 0.89 ounces
  • ATLAS BT23 Ski Feet

    ATLAS BT23 Ski Feet

    $80.90 Add to cart

    BT23: Atlas Ski Feet

    The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only. NSN 1005-01-640-8881

    Weight: 1.5 ounces

    Product will work on V8, PSR and CAL models only.

  • 5-H Atlas Bipod BT35-LW17

    $681.00 Read more
    • Mounts directly to any 1913 style Picatinny rail via included CUSTOM ADM Lever.
    • Height Range approximately 5.5 – 10.5″
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • 5-H Pan and Cant can be locked out at top dead center
    • PAN and CANT Tension Wheel has Detent adjustability and Cam-Lock
    • PATENTED multiple deployable leg positions of 0, 45, 90, 135 and 180
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight 27.2 ounces.
    • Footprint spread 14.5″– 19.5″
    • Available in black only
    • Made in America
  • BT10-LW17 V8 Atlas Bipod

    $398.00 Read more
    • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Weight 12.7 ounces.
    • Footprint spread 8″– 11″
    • Available in black only
    • Made in America
  • Atlas 5-H & Super CAL BAS Ski Feet BT66

    $134.90 Add to cart

    The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5″ 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.

    Weight: 6.16 ounces

    Product will work on 5-H and Super CAL models only.

  • ATLAS BT22: Leg Extensions

    $80.90 Read more

    BT22: Atlas Leg Extensions

    The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369

    Weight: 1.8 ounces

    Product will work on V8, PSR and CAL models only.

  • BT46-NC PSR Atlas Bipod: Standard height

    BT46-NC PSR Atlas Bipod: Standard height

    $391.40 Add to cart

    BT46-NC PSR Atlas Bipod: Standard height No Clamp

    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.

    It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.

    The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).

    • Height Range: 5 – 9.4″ (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5″ diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 11.42 ounces approx.
    • Footprint: 8–11″
  • Atlas BT19 Accuracy International Spigot

    $109.99 Read more

    The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism. The BT19 is constructed from 6061T6 Aluminum with a type II hard coat anodize mated with an alloy steel Spigot that is finished with a Manganese Phosphate.

    The evolution of long range shooting and shooter’s demand drove subtle changes to the BT19. The latest modification stops the 3 to 9 rotation. Available in black only.

    Weight: 4.7 ounces

     

  • ATLAS BT73: M-LOK® Rail

    $47.18 Read more

    The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas BipodsAccu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.

    Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.

    • Length: 1.575″
    • Width: 0.835″
    • Weight: 0.59 oz

     

     

    For a direct M-LOK® to “NC” (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter

  • ATLAS BT20-B: Atlas Accuracy International Spigot Bottom Rail

    $40.39 Read more

    The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod.

    It is the same rail found on our BT21 TRG BracketBT43 Leveraged Rail and BT20-B/ARCALOCK Clamp. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept any rail mounted bipod.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.

    • Length: 1.60″
    • Weight: 0.57 ounces
  • ATLAS BT49: 2.05″ 1913 Adjustable Picatinny Rail

    $40.39 Read more

    The BT49 – 2.05″ 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 – 1.6″ with a 1.00″ radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks.

    The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.

    • Length: 2.05″
    • Weight: 0.4 ounces
  • BT65-LW17

    $367.60 Read more

    The BT65-LW17 CAL (Cant And Loc) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It was developed for shooters that do not desire the Panning feature of the V8 or PSR series of Atlas bipods. The BT65-LW17 has the larger Inner legs, patented 5 leg positions that do not rotate found on the Atlas PSR series, quick change feet and “hold what you move technology.” We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc.” Available in black only.

  • Area 419 ARCALOCK Clamp

    Original price was: $124.99.Current price is: $113.99. Read more

    “Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System.” – Area 419

    The ARCALOCK Clamp works on all standard ARCA/1.5″ dovetail rails. It will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility). Compatible Atlas Bipod models listed below.

    It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.

    The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and gold anodized Knob. The screw is turned from 303 stainless steel.

  • ATLAS BT75: Atlas 5-H & Super CAL Raider Cleat Feet

    $128.00 Add to cart

    The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger.

    The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only.

    Total Weight of Pair: 4.76 ounces

  • Atlas BT72-LW17 Super Cal Bi-Pod

    $593.90 Read more

    BT72-LW17 Super CAL Atlas Bipod

    The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology™.”

    It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.

    • Height Range: 5.875-11.125” (7.66” at 90°) 
    • Cant: 45 degrees
    • Position Button: 0.5″ diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 23.16 ounces
    • Footprint: 14.75-19.37″
  • ATLAS BT43: Leveraged Rail

    $134.90 Read more

    The BT43 Leveraged Rail is a BT20-B and an American Defense ADM-170-S lever as a complete assembly. It provides the means to quickly attach/detach any rail attached accessory to include our Atlas Bipods and Precision Rail Monopods.

    The BT20-B is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    • Length: 1.6″
    • Bottom of rail to bottom of BT20-B rail: 0.58″
    • Weight: 2.5 ounces
  • ATLAS BT80: M-LOK® Flush Cup Rail

    $60.59 Read more

    The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our 1913 Picatinny rail mounted Atlas BipodsAccu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.

    Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.

    • Length: 2.875″
    • Center-to-center: 1.575″
    • Width: 0.835″
    • Weight: 1.038 oz
Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!