Showing all 19 results

Filter
  • HRD GEAR 6MM MAGAZINE SPACER KIT

    $68.99 Read more

    The HRD GEAR 6mm magazine spacer kit is designed to make the popular 6BR case and it’s variant cases run flawlessly in the AW/AX magazines (part numbers 0726 and 6677).  The back spacer is a press fit and clips into place from the top of the mag. There is a small hole to aid in removal of the back spacer (the tip of a bullet fits perfectly).  THERE ARE NO TOOLS OR MODIFICATIONS NEEDED OR REQUIRED TO INSTALL THIS SPACER KIT.

  • Insite Arms 2-Round AICS Magazine Extension

    $19.99 Add to cart

    This Insite Arms Mag Extender is designed for 308 sized Box magazines, AI, MDT & Accurate – single feed only. (Will not work with AW Mags).

    Produced from 6061 Aluminum.

  • Sale!

    Gray Ops CNC – Billet Slider – .22 Ammo Case 50 rnds

    $160.00 Select options

    Discover the Gray Ops CNC Billet Slider – .22 Ammo Case, your ultimate solution for carrying and accessing 22LR ammo with unparalleled ease. Safely store and conveniently access your rounds using factory 50 ct. plastic sleeves or compatible sleeves from various brands.

  • MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 10 RND – no binder plate

    $79.99 Add to cart

    These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

    Available with or without the front binder plate. See details below for benefits and limitations of each version.

  • HRD GEAR 6MM MAGAZINE SPACER KIT & AIAW Double Stack Magazine Package

    $189.99 Read more

    The HRD GEAR 6mm magazine spacer kit is designed to make the popular 6BR case and it’s variant cases run flawlessly in the AW/AX magazines (part numbers 0726 and 6677).  The back spacer is a press fit and clips into place from the top of the mag. There is a small hole to aid in removal of the back spacer (the tip of a bullet fits perfectly).  THERE ARE NO TOOLS OR MODIFICATIONS NEEDED OR REQUIRED TO INSTALL THIS SPACER KIT.

    Also Included:

    Accuracy International factory mags for short action 308 AW/AWP and AT rifles.  These are 10 round, double stack, double feed magazines.

     

    Model: AW Rifle/AT Rifle Or Custom Action Able to accept AW Mags ( ie. not factory 700 actions with integrated feed lips )

    Caliber: .308 Win Family, 6/6.5 CM, BR/Dasher etc..

    Capacity: 10 Round

    Material: Steel

    Finish: Matte Black

    Firearm Fit: Short Action

  • MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 12 RND – no binder plate

    $94.95 Add to cart

    PRODUCT DETAILS

    These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

    Available with or without the front binder plate. See details below for benefits and limitations of each version.

    DETAILS

    MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

    SPECIFICATIONS

    • 3.055” Outside Length
    • 2.870” max cartridge overall length (COAL) with binder plate
    • 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
    • 4.61” Rear Height

    COMPATIBILITY

    • 308WIN
    • 6mm Creedmoor
    • 243WIN
    • 260 Rem
    • 6.5 Creedmoor
    • 7mm-08 Win
    • 308/7.62×51 NATO
    • 22 – 250 Rem (will work at a reduced capacity)

    BINDER PLATE DETAILS

    • The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
    • The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
  • Accuracy International AI-0726: AW and AT Rifles 7.62/.308 Doublestack (10 Round)

    $124.99 Read more

    Accuracy International factory mags for short action 308 AW/AWP and AT rifles.  These are 10 round, double stack, double feed magazines.

     

     

    Specifications

     


    Manufacturer: Accuracy International

    Model: AW Rifle/AT Rifle

    Caliber: .308 Win Family, 6/6.5 CM, BR/Dasher etc..

    Capacity: 10 Round

    Material: Steel

    Finish: Matte Black

    Firearm Fit: Short Action

  • Sale!

    MasterPiece Arms ( MPA ) 2 round holder

    $19.99 Add to cart

    This new 2 Round Holder is designed to fit onto any MPA BA Competition, Standard Chassis, Hybrid, CSR or BA Lite. This is designed for Short Action Calibers with a 0.472 bolt face. (308, 6.5 Creedmoor, 6.5×47 Lapua, 6 Dasher, 6 BR, etc, etc).

    The design of the holder presents the round at a slight angle, making it easier for the shooter to grab hold of the back of the cartridge for quick removal.

    The system attaches to any of the six oblong slots on either side of the magazine well.

    1. Using an Allen wrench, loosen the set screw in the “Chassis Mount” component and slide the unit out of the oblong slot.
    2. Tighten the set screw to secure the Chassis Mount component into the oblong slot.
    3. Attach the 2 Round Holder to the Chassis mount via the button head cap screw that is included.

     

  • MasterPiece Arms ( MPA ) AICS Mag Loader

    $19.99 Read more

    This mag loader works well with all AICS style Magazines

     

  • MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 5 RND – no binder plate

    $79.95 Add to cart

    PRODUCT DETAILS

    These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

    Available with or without the front binder plate. See details below for benefits and limitations of each version.

    DETAILS

    MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

    SPECIFICATIONS

    • 3.055” Outside Length
    • 2.870” max cartridge overall length (COAL) with binder plate
    • 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
    • 2.52” Rear Height

    COMPATIBILITY

    • 308WIN
    • 6mm Creedmoor
    • 243WIN
    • 260 Rem
    • 6.5 Creedmoor
    • 7mm-08 Win
    • 308/7.62×51 NATO
    • 22 – 250 Rem (will work at a reduced capacity)

    BINDER PLATE DETAILS

    • The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
    • The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
  • MasterPiece Arms ( MPA ) Cheek Riser Locator Collars

    $26.99 Read more

    Attach these shaft collar to your guide rods on any MPA Chassis cheek riser assy to provide a quick, easy and consistent method of relocating your cheek riser to your predetermined position. These work with chassis with and without a thumb wheel system.

    For those with a thumb wheel design, simply remove the thumb wheel from the cheek riser assy, install these shaft collars, set the appropriate height position and your repeatibility to that position will be the same everytime you remove your cheek riser and re-install it.

    Takes about 5 minutes to install. Price includes shipping.

  • MDT .223 METAL AICS MAGAZINE 10 round

    $79.95 Add to cart

    PRODUCT DETAILS

    These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

    DETAILS

    MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

    SPECIFICATIONS

    10-Round:

    • 3.055” Outside Length
    • 3.90″ Rear Height (same height as MDT 10-rd .308 metal magazines)
    • 2.50” max cartridge overall length (COAL)
    • Polymer feedlip inserts extend ~0.5″ past the end of the metal feedlip backer, thus retaining the round longer, helping ensure the tip of the round has entered the chamber before the rear of the round is released.

    MDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.

    10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.

    COMPATIBILITY

    • 223 Rem
    • 5.56 NATO
  • MasterPiece Arms ( MPA ) Magwell Plate: Teeth -for Matrix Pro

    $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Hook -for Matrix Pro

    $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Complete Kit for Matrix Pro ( Blocker, Hook & Teeth )

    $219.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro

    $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Mag Block Insert

    $14.00 Add to cart

    Mag Block Insert

    This insert is designed to fit into the mag catch slot in Short Action MPA BA, BA Comp & Hybrid Chassis. This part was originally designed to work with Curtis Custom Vector Actions, for customers who wanted to run AICS magazines (on an AW Cut Action), to eliminate the gap before the AICS mags make contact with the action. However, we have also found these very useful for eliminating feeding issues when a competition shooter is putting weight or pressure on either the bottom or front of their magazine, such as when shooting from a barricade.

    When installing these, after you have verified fit and tested with a magazine, we recommend that you remove the insert and place some adhesive to the top flat surface to make contact with the top of the pocket in the mag slot in the chassis. Superglue or similar is recommended.

    Slight polishing may be required for proper fit. You will receive (1) Version 1 and (1) Version 2 inserts with each order. Please watch the video below for installation instructions.

  • MasterPiece Arms ( MPA ) EVG Left hand insert

    $24.99 Add to cart
    This insert is designed to be used with a standard Right Handed EVG (Enhanced Vertical Grip) for shooters who want the Thumb Notch and Trigger Finger support on the left side of the grip surface.
    This 3D printed component will attach to your chassis via 2 oblong bosses on the insert plus double sided 3M PSA adhesive. Very simple, quick and easy to install.
    So if you are left handed shooter and want to be able to utilize the benefits of the EVG, this is a great option.

     

  • MDT .223 POLYMER AICS MAGAZINE 10 Round

    $44.95 Add to cart

    PRODUCT DETAILS

    Polymer MDT AICS External Box Magazines for MDT Chassis systems. Also works in many other M24 type chassis and bottom metals.

    DETAILS

    MDT Detachable AICS box magazines are designed to fit the MDT TAC21, ACC, ESS, LSS-XL, XRS and LSS Chassis systems, as well as many other M24 type chassis and bottom metals. Manufactured from high quality Polymer and uses a tempered steel spring.

    We put our magazines through vigorous testing. We have used high quality strength polymer with a high glass content to ensure durability and strength. Although not unbreakable, we have driven over these magazines with cars and trucks which did not break them.

    CAPACITY

    • .223REM family of cartridges: 10 Rounds
    • MAX OAL: 2.550″

    COMPATIBILITY

    MDT AICS magazines are guaranteed to work in our XRS, TAC21, LSS, LSS-XL, HS3, ESS and ACC chassis systems.

    They do not work with the following inlets; Browning X-bolt, Winchester XPC and may require fitting in Winchester Model 70. Based on customer feedback, the following systems work well with our magazines, but fitting may be required in some cases.

    • XLR Chassis
    • KRG X-Ray – Some need adjustment
    • GRS riflestocks- (Configured for AICS magazines)
    • CDI Precision bottom metals- (Configured for AICS magazines)
    • Pacific tool and Gauge bottom metals- (Configured for AICS magazines)

    COMPATIBLE CALIBERS

    • 223 Rem
    • 5.56 NATO
Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!