Showing 43–63 of 65 results
Filter-
SPUHR SP-4602 Ø34 H38 6MIL PIC
$559.00 Read moreArticle no.: SP-4016
Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 150 mm/5.9” Weight: 252 g/8.9 oz 10-degree wedge included -
SPUHR Separate Rings SR-3000 Ø30 H30MM PIC
$469.00 Add to cartArticle no.: SP-4003B
For scopes with long erector housings such as U.S. Optics TPAL and Nightforce BEAST. Distance from ring to ring is 82 mm/3.228″. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 147 mm/5.79” Weight: 268 g/9.5 oz 10-degree wedge included -
Sale! Out of stock
TACOMHQ Charlie Tarac Macro, 30 MRAD, Scope Mount Only, For: NightForce 56mm Obj.
$2,249.00Original price was: $2,249.00.$1,789.00Current price is: $1,789.00. Read moreFor NightForce 56mm obj. Scopes Only
-
SPUHR SP-4301C Ø34 H30mm 3MIL
$559.00 Add to cart3 MIL/10 MOA Height: 30 mm/1.18” Length: 120 mm/4.73” (body) 130 mm/5.12″ (OAL) Weight: 217 g/7.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails.- Tube Diameter34 mm
- Height30 mm
- Tilt3 MIL/10.3 MOA
- RailPicatinny
- Quick ReleaseNo
- CantileverNo
- ColorBlack Hardcoat Anodized
-
SPUHR SP-4011 Ø34 H28mm 0MIL
$559.00 Read more“The GAP Mount” Made on request from George Gardner of GA Precision. Special mount with extra low height. Due to the low height it will not work with scopes like S&B 5-25 and 3-20, the Kahles k624i, or Vortex Razor as the erector housing will collide with the bridge between the rings. It works fine with Bushnells and S&B 3-12×50 and 4-16×50. Aiside from the low height a special feature of this mount is an extra front clamping screw allowing the SP-4011 to be mounted partly forward – in a cantilever position – on the Picatinny rail of the action. This is especially useful on AR-type rifles and actions with integrated Picatinny rails like Defiance, Surgeon and Impact, where the rail isn’t sufficiently long for the desired eye-relief with some scopes. 0 MIL/0 MOA Height: 28 mm/1.102” Clearance: 5.5 mm/.216″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 231 g/8.1 oz 10-degree wedge included
-
Gray Ops CNC Precision Scope Mount 36mm dia. / 1.540″h
$539.00 Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Gray Ops CNC Precision Scope Mount 34mm dia. / 1.540″h
$539.00 Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Gray Ops CNC Precision Scope Mount 30mm dia. / 1.125″h
$539.00 Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
SPUHR SP-4901 Ø34 H30mm 9MIL PIC
$559.00 Add to cart9 MIL/31 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 222 g/7.9 oz 10-degree wedge included
- CantileverNo
- ColorBlack Hardcoat Anodized
- Height30 mm
- Quick ReleaseNo
- Rail/TypePicatinny
- Tilt9 MIL/30 MOA
- Tube Diameter34 mm
-
Gray Ops CNC Precision Scope Mount 35mm dia. / 1.125″h
$539.00 Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Gray Ops CNC Precision Scope Mount 34mm dia. / 1.125″h
$539.00 Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
SPUHR MOUNT R-7021 TIKKA T3 SCOPE BASE 0MIL
$149.99 Add to cartArticle no.: HP30-25A
Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz -
SPUHR MOUNT HP30-19A PICATINNY AESTHETIC RINGS Ø30 H19/0.75″
$264.99 Add to cartArticle no.: HP30-25A
Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz -
SPUHR MOUNT HP40-30A PICATINNY AESTHETIC RINGS Ø34 H30/1.18″
$264.99 Add to cartDESCRIPTION
Article no.: HP40-30A
Aesthetic hunting rings for 34 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 30 mm/1.18″ Weight: 115 gram/4.1 oz -
Nightforce Standard Duty Base – REM 700 LA 1913 Mil-Std
$78.00 Select optionsNightforce Optics Standard Duty Aluminum Base for Remington 700 Long Action Rifle, 1913 Mil-Std Rail. Available in 0 or 20 MOA Elevation
-
SPUHR TIKKA T3 SCOPE BASE 0MIL R-7021
$139.99 Add to cartArticle no.: SP-6002
0 MIL/0 MOA Height: 38 mm/1.5” Length: 139 mm/5.47” Weight: 272 g/9.6 oz Note: does not come with bubble level. 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails -
SPUHR SP-4016 Ø34 H38 3MIL PIC
$559.00 Add to cartArticle no.: SP-4016
Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 150 mm/5.9” Weight: 252 g/8.9 oz 10-degree wedge included -
Nightforce Standard Duty Base – RUGER 10-22 1913 Mil-Std – 0-MOA
$78.00 Add to cartNightforce Optics Standard Duty Aluminum Base for Ruger 10-22 Rifle, 1913 Mil-Std Rail, 0 MOA Elevation.
-
Nightforce Standard Duty Base – Savage Round SA 1913 Mil-Std – 0-MOA
$78.00 Add to cartNightforce Optics Standard Duty Aluminum Base for Savage Round Short Action Rifle, 1913 Mil-Std Rail, 0 MOA Elevation.
-
SPUHR MOUNT HS30-21A SAKO AESTHETIC RINGS Ø30 H21/0.83″
$223.99 Add to cartArticle no.: HS30-21A
Hunting rings for 30 mm tube on SAKO OptiLock bases/rails. Features two plain classic top covers. Height: 21 mm/0.83″ Weight: 82 gram/2.9 oz “Protected, EU Design Reg. No. 002438440/0001-0002” -
Hawkins Precision Heavy Tactical One-Piece Scope Mount 20MOA
$469.00 Add to cartHeavy Tactical One-Piece Scope Mount
The Hawkins Precision Heavy Tactical One Piece Scope Mount is the latest premier optic mount in the Hawkins line. One of the most robust mounts on the market, the heavy tactical line features a triple cross bolt design, six screw caps, built in bubble level and a picatinny accessory rail that can added or removed at the user’s discretion. These mounts are 100% made in the USA and come in a corrosion resistant black anodized finish. Models come in 0, 20, and 40 MOA cant. Available in 34mm.
Torque Specs: 25 in-lbs ring caps / 65 in-lbs cross bolts
Height MOA Cant 34mm Application
1.270″ 0/20/40 * 56mm objective with standard & Heavy barrel contours
1.500″ 0/20/40 * 56mm objective with AR style front for end