Tools | Page 3 Of 5 | Insite Arms

Sale!
Fix It Sticks 6.5MM CREEDMOOR ADAPTER SET OBSTRUCTION TIP ADD ON
Original price was: $19.99.Current price is: $15.99. Add to cart
Expand the functionality of your Fix It Sticks cleaning rods with these 6.5mm adapters.

Includes:
- six 8-32 threaded brass adapters
- 1 brass obstruction tip
FIX IT STICKS Small Torque Limiter 49 INCH LBS FISTL49
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
FIX IT STICKS Small Torque Limiter 45 INCH LBS FISTL45
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
FIX IT STICKS Small Torque Limiter 25 INCH LBS FISTL25
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
FIX IT STICKS Small Torque Limiter 15 INCH LBS FISTL15
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Sale!
FIX IT STICKS POUCH BENCH BLOCK
Original price was: $24.99.Current price is: $22.99. Add to cart
Description
Pouch Block

Helps secure parts when driving pins

High impact polymer protects gun finish

Non-slip feet for table top use

Integrates with Fix It Sticks Armorer’s Kit Case
Out of stock
Impact Precision 737 Action Wrench
$149.00 Read more
Fix It Sticks BRONZE SCRAPER
$14.99 Add to cart
Custom all purpose Bronze Scraper bit.
- Accepts threaded 8/32 rods / attachments.
- Comes with a Steel 8/32 insert bit so it can work with any standard magnetic 1/4″ driver
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.
Fix It Sticks Brass Pin Punch Set
$44.00 Add to cart
Set of Six Pin Punches designed to integrate with the Fix It Sticks System. Steel insert in base enables them to be used with magnetic drivers.

Pin Punches are in the following sizes:
- 1/16″
- 3/32″
- 1/8″
- 5/32″
- 3/16″
- 1/4″
Pin Punches work with any standard 1/4″ Driver and are machined from solid bar stock.
FIX IT STICKS Small Torque Limiter 10 INCH LBS FISTL10
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
FIX IT STICKS Small Torque Limiter 12 INCH LBS FISTL12
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Insite Arms Barrel Tuner – For 1.125″ Heathen 5/8×24 thread Black Nitride
$200.00 Add to cart

Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.
FIX IT STICKS Large Torque Limiter 80 INCH LBS FISTL80
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 5,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Out of stock
Four Limiter Kit with Deluxe Case and T-Way Wrench FISTLS11-T
$239.99 Read more

This Fix It Sticks Set comes with 65, 45, 25, and 15 Inch lbs torque limiters, 16 different bits, 1/2″ socket & 1/4″ bit adapter set, permanent T-way wrench, and a tactical tailor deluxe case.
Sale! Out of stock
Fix It Sticks 65 in/lbs and 25 in/lbs Torque Limiter Kit WITH POUCH FISTLS5
Original price was: $139.99.Current price is: $105.99. Read more

Kit Includes: 65 in/lbs Torque Limiter, 25 in/lbs Torque Limiter, 16 Bits, 1/2″ Socket, 1/4″ Bit Adapter and Tactical Tailor Basic Pouch.
Out of stock
JUHL Utility Hooks (Pack of 4)
$16.99 Select options

AGR™ Advanced Gear Research: JUHL™ J Utility Hook – Large
The JUHL is a general purpose utility hook make of super tough nylon. It is great for attaching keys, caps, gloves, or a water bottle. The slot fits 1″ / 25 mm webbing.
JUHL stands for J Utility Hook Large and is pronounced “jewel”
NOT TO BE USED FOR CLIMBING OR LIFE-SAVING.
SOLD IN PACK OF FOUR (4)
Out of stock
Fix It Sticks RATCHETING T-WAY WRENCH WITH LOCKING HEX DRIVE
$68.00 Read more

As if our Ratcheting T-Way Wrench wasn’t useful enough, this version has a locking, spring loaded magnetic hex collar that holds 1/4″ bits securely in place at any angle. So not only can you quickly tighten or loosen fasteners in tight spots, you can do it without worrying about losing a bit. This wrench also works with Fix It Sticks Cleaning Rod System, helping you clear obstructions or do a quick cleaning in the field.
FIX IT STICKS Battery Cap Tool
$14.99 Add to cart

Description

Use our aluminum battery cap tool to change batteries without chewing up the cap. Machined from aluminum with a steel insert for magneting drivers. Works with any standard 1/4″ driver, including Fix It Sticks tools or our T-Way Wrench (not included).
FIX IT STICKS Small Torque Limiter 30 INCH LBS FISTL30
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Fix It Sticks CARRYING CASE – XXL
$83.99 Add to cart
Description
The XXL Carrying Case — the same case we use for our Field Armorer’s Toolkit — has five molded, low-profile 1/4″ MOLLE bit holders, a divider with MOLLE straps, elastic loops, velcro panels inside and out, and a roomy exterior pocket for your favorite accessories.

Dimensions: 10.5″ x 7″ x 3.5″

Velcro fixed divider with MOLLE straps

5 molded bit holders, each with 24 1/4″ bit slots

Velcro patches on inside for bench block and magnetic tray (available separately)

Accessory pocket and velcro on outside
Gray Ops CNC CMI Chamber Flag & Barrel Cooler Right Hand
$69.99 Add to cart
This short action chamber flag has some features we really love. Prevents mags from being inserted unless the flag is removed and the ability to add a chiller on those hot days!

Detects round left in chamber.

Prohibits AICS magazines from loading when flag is in place, (AW mags when bolt is pulled back).

AICS magazines must be removed for flag to go into chamber (AW mags when bolt is pulled back).

Prevents leaving magazine in rifle when flag is inserted.

One hand insertion and removal.

Fits short actions.

Push to forward position and use with portable air pump for barrel cooling.

The cooler is rechargeable via USB – approximate 15 min run time, it is recommended to connect a small USB battery pack to recharge while not in use.

For cooling barrel in vertical orientation place one side of elastic over windage knob to hold bolt forward.

Includes attached fob with target reference information.