Tools | Page 4 Of 5 | Insite Arms

FIX IT STICKS Small Torque Limiter 55 INCH LBS FISTL55
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
FIX IT STICKS Small Torque Limiter 53 INCH LBS FISTL53
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Fix It Sticks Duo Case
$55.00 Add to cart
Fix It Sticks Bit Extension that can be used with our T-Handle Wrenches for hard to reach screws and fasteners.
- 3.5 Inches in Length (not including male hex portion)
- Magnetic end accepts any standard 1/4″ Bit
Insite Arms Barrel Tuner – For 0.995″ Heathen 3/4 x 24 , 18×1, 3/4×20 thread Black Nitride
$200.00 Add to cart

Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.
Fix It Sticks BOTTLE OPENER
$8.99 Add to cart
Bottle Opener Bit
- Happy Hour – Fix It Sticks Style
- Machined from steel barstock
- Works with any standard ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
Fix It Sticks AIMPOINT BIT
$14.99 Add to cart
Custom bit designed to aid in the adjustment of Aimpoint Sights.

Aimpoint Adjustment Bit
- Two prong design specifically works with the windage and elevation adjustment knobs.
- Semi-circular wings designed to fit “coin-slot” style adjustment knobs / battery covers.
- Molded synthetic polymer won’t mar or scratch the finish of the sight.
- Metal ¼” Hex Base allows it to work with any ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
Fix It Sticks MINI PRY BAR
$12.99 Add to cart
Custom Bit designed to make your Fix It Sticks a mini pry-bar

Mini Pry Bar
- Corrosion resistant steel design makes the pry bar strong and durable
- Cut-outs allow the pry bar to be used as a 1/4″, 5/16”, and 3/8” wrench
- Works with any standard 1/4” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
Out of stock
Fix It Sticks THE WORKS W/ ALL-IN-ONE TORQUE DRIVER FIS-WORKS – VTD
$319.00 Read more
Get our All-In-One Torque Driver, AR15 Field Maintenance, and Accessory Bits all in one Kit!

This kit contains numerous bits and accessories designed to help maintain your AR-15, tighten down your optics and rifle parts to the correct torque, and work on pistols and shotguns as well. Includes the following specialty parts / bits:
- T-Handle Wrench
- All-In-One Torque Driver
- 1/2″ Socket and Bit Adapter
- Universal Choke Tube Wrench
- 1911 Bushing Tool
- Glock Front Sight Bit
- Mini Pry-Bar
- Bolt Carrier Group Scraper
- Metal Pin Punch
- Castle Nut Wrench
- Bronze Scraper
- Steel Pick
- Non-Marring Plastic Pin Punch
- Cleaning Brush Bit
- A2 Front Sight Adjustment Bit
- Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)
- Set of two bit adapters to allow for 8-32 threaded components
- 24 Chrome Plated 1/4″ Bits: [hex 2.5mm, 3mm, 4mm, 5mm, .050, 5/64, 3/32, 1/8, 7/64, 9/64, 5/32, 3/16, 1/4] T8, T10, T15, T20, T25, T27, T30, P1, P2, [slotted 3/16, 3/32]
- Magnetic Patch
- Soft Carrying Case
Soft carrying case has molded in bit holder that is designed to hold any bit / accessory with a standard 1/4″ Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component.

Be prepared at the Range or in the Field.

Please note that the All-in-One Torque Driver operates differently than our Torque Limiters. For instructions and instructional video, please click here.
AR-15 Accessory Bit Pack FISAR15-ABP3
$34.99 Add to cart
Three custom bits designed to aid in maintaining and working on an AR-15. Includes:
- Bolt Carrier Group Scraper Bit
- Castle Nut Wrench Bit
- A2 Front Sight Bit
Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.

Can also be used with any standard magnetic 1/4″ Bit Driver

NOTE: Fix It Sticks Not Included
Out of stock
Fix It Sticks 65 in/lbs and 15 in/lbs Torque Limiter Kit WITH POUCH FISTLS6
$139.99 Read more

Kit Includes: 65 in/lbs Torque Limiter, 15 in/lbs Torque Limiter, 16 Bits, 1/2″ Socket, 1/4″ Bit Adapter and Tactical Tailor Basic Pouch.
Out of stock
3″ TacTie (Pack of 4)
$10.99 Select options

Maxpedition's patent pending TacTie® Attachment Strap system is used to integrate accessory pockets onto packs, vests, MOLLE equipment and PALS surfaces effortlessly in an interlocking manner.
FIX IT STICKS Small Torque Limiter 35 INCH LBS FISTL35
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Fix It Sticks LONG RANGE COMPETITION TOOLKIT with Individual Tourque Limiters
$454.99 Add to cart
Precision is the name of the game in long-range shooting, and Fix It Sticks’ Long-Range Competition Toolkit will help you keep your high-performance rifle in peak running condition while in the field.

Use this comprehensive assortment of tools in even the most austere conditions. With it, you can tighten down your optics, action and accessories to the correct torque to ensure precise round placement, shot after shot.

The Long-Range Competition Toolkit includes:
- Ratchet T-Handle w/Locking Hex Drive
- 15, 25, 45, 65 in-lbs torque limiters or All-In-One Torque Driver
- 1/2″ Socket/Adapter
- Mini Pry Bar
- Pin Punch Set (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 1/4″)
- Bronze Scraper
- Steel Pick
- Cleaning Brush Bit
- Set of two 8-32 adapters
- Machined Aluminum Bubble Level Set, which includes: magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials
- Stainless Steel Rod Set (6) with .223/6.5/.30 Brass Adapters & Ball Bearing Drive (locks into T-handle, assembles to 44″)
- 3/16″ Extended Action Bit
- 5/32″ Extended Action Bit
- 24 Chrome Plated Bits: T8, T10, T15, T20, T25, T27, T30, P1, P2, [Hex 0.050″, 5/64″, 3/32″, 1/8″, 7/64″, 9/64″, 5/32″, 3/16″, 1/4″, 2.5mm, 3mm, 4mm, 5mm] [Slotted 3/16″, 3/32″]
- Magnetic Velcro Patch
- Micro Fiber Lens Cloth
- Torque Value Reference/Conversion Card
- Soft Carrying Case with molded, low-profile bit holders designed to hold any bit / accessory with a standard 1/4″ Base
Out of stock
FIX IT STICKS COMPACT PISTOL TOOLKIT FOR SIG SAUER®
$239.00 Read more
Whether you carry daily or you’re simply a Glock® enthusiast, you’ll want the Field Toolkit for Glock at the ready. This toolkit has everything you need to maintain or upgrade a Glock pistol, including specialty tools designed to work with Glock firearms such as our Front Sight Tool, Base Plate Removal Tool, and more.

Includes the following specialty parts / bits:
- Ratchet T-Handle w/Locking Hex Drive
- Mini All-In-One Torque Driver
- 3/32″ Pin Punch
- 1/8″ Pin Punch
- Steel Pick
- Cleaning Brush Bit
- Channel Liner Installation and Removal Tools
- Sight Tool
- Magazine Base Plate Removal Tool
- Battery Cap Tool
- Two brass rods
- Set of two 8-32 adapters
- 10 Electroless Nickel Plated Bits: T8, T10, T15, P1, H2.5mm, H.050”, H1/16″, H5/64”, 3/32”Extended Bit (for adjusting hard to reach screws on optics), SL6mm.
- Compact Carrying Case with molded bit holders designed to hold any 1/4″ bit
FIX IT STICKS FIELD TOOLKIT FOR GLOCK®
$239.00 Add to cart
Whether you carry daily or you’re simply a Glock® enthusiast, you’ll want the Field Toolkit for Glock at the ready. This toolkit has everything you need to maintain or upgrade a Glock pistol, including specialty tools designed to work with Glock firearms such as our Front Sight Tool, Base Plate Removal Tool, and more.

Includes the following specialty parts / bits:
- Ratchet T-Handle w/Locking Hex Drive
- Mini All-In-One Torque Driver
- 3/32″ Pin Punch
- 1/8″ Pin Punch
- Steel Pick
- Cleaning Brush Bit
- Channel Liner Installation and Removal Tools
- Sight Tool
- Magazine Base Plate Removal Tool
- Battery Cap Tool
- Two brass rods
- Set of two 8-32 adapters
- 10 Electroless Nickel Plated Bits: T8, T10, T15, P1, H2.5mm, H.050”, H1/16″, H5/64”, 3/32”Extended Bit (for adjusting hard to reach screws on optics), SL6mm.
- Compact Carrying Case with molded bit holders designed to hold any 1/4″ bit
FIX IT STICKS Small Torque Limiter 40 INCH LBS FISTL40
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Fix It Sticks CARRYING CASE – XL
$55.00 Add to cart

Description

Version A (All-Purpose Case): Soft carrying case has four molded bit holders that attach to the middle divider. Each bit holder can fit up to twenty four components and bits (ninety-six total). Sewn loops hold a T-Way Wrench, as well as additional components. Magnetic Patch (not included) can attach to the Velcro square on the inside of the case.

Version B (3Gun / Long Range Case): Soft carrying case has two molded bit holders that attach to the middle divider. Each bit holder can fit up to twenty four components and bits (forty eight total). Sewn loops hold T-Way Wrench, as well as additional components. Middle panel holds Fix It Sticks Bore Obstruction / Cleaning Rods, Caliber Adapters, Obstruction Tips, and Ball Bearing Handle. Magnetic Patch (not included) can attach to the Velcro square on the inside of the case.
FIX IT STICKS Small Torque Limiter 6 INCH LBS FISTL6
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Fix It Sticks EXTENDED ACTION BITS TorX 30
$13.99 Add to cart
Custom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.

Integrates perfectly with T-Way Wrench for shop use.
Out of stock
Atlas B&T BT41 Letter Opener
$404.00 Read more

BT41: B&T Letter Opener

The protective Sheath is machined from 6061-T6 aluminum, Mil Spec hard anodized with Stainless Steel components, the design and size is borrowed from the legs found on the Atlas 5-H Bipods. A portion of the hexagon profile bar stock, which is used for Atlas Bipod legs, is retained to help prevent rolling off your desk top

The overall length of the sheathed B&T Letter Opener is approximately 9.5” long; the Letter Opener component is 9.125” long having a blade length of 5”, .500 width and thickness of .190 and weighs 10 ounces approximately. It is shipped in a black 1000 denier Cordura pouch (made by CSM Tactical Gear). These are 100% made in America in limited numbers.
Fix It Sticks EXTENDED ACTION BITS 1/8″
$13.99 Add to cart
Custom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 1/8″ for KIDD, etc.
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.

Integrates perfectly with T-Way Wrench for shop use.