Showing 22–42 of 627 results

Filter
  • Gray Ops M-LOK Thumb Rest

    Gray Ops M-LOK Thumb Rest

    $62.99 Add to cart

    FEATURES

    • Provide comfortable positioning for your support hand during barricade style shooting
    • Increased hand pressure between chassis and shooting bag
    • Attaches via M-Lok slot with the included M-Lok nut/screw
    • Small, ergonomic design
    • Ambidextrous and works with both Right and Left handed shooters
    • Machined from 6061 Aluminum Extrusion
    • Hard Black Anodized
  • Short Action Precision ( SAP ) Run n’ Gun Bag

    $79.99 Select options

    The SAP Run n’ Gun bag is a lightweight bag that really does it all! Use it as a conventional rear bag, or strap it to your rifle for improvised positional shooting.

    Lightweight – Only 6.5 oz!
    Perfect size for easy carry
    Dimensions 7″ x 4.5″ x 3″
    Low, Mid, and High Position
    Strap to loop around rifle with QD Buckle
    Tether for adding a sling swivel or flush cup swivel
    Rubber skin on bottom for grip
    1000 Denier Cordura material
    Double wall construction for durability
    Available in Coyote, Multicam, OD, Black, Kryptek highlander, Kryptek Typhoon, ATACS AU & ATACS FG
    Made in USA

  • Short Action Precision ( SAP ) Two Round .223 Holder

    Short Action Precision ( SAP ) Two Round MAGNUM Holder

    $16.99 Select options

    NEW Magnum cartridge size! Hold an extra two rounds right where you need them in a pinch with the SAP Magnum Two Rounder! This two round holder attaches with Velcro to side of rifle near ejection port. This little guy has saved my bacon on that one last shot more times than I can remember!

    Don’t know which Two Rounder for your round?

    Measure the case and compare to the specs here.

    Important! You must clean the stock with a good quality rubbing alcohol (91% preferred) and let that dry completely to prepare the surface for proper adhesion of the supplied industrial strength Velcro piece!

    • Fits 6.5 SAUM, 7 SAUM, .338 Lapua, and most Mag/Ultramag cartridges
    • Other cartridges just measure case OD
    • Will take cartridges .550″ / 14mm up to .80″ / 20mm
    • Based on a Case OD of .587″ / 14.91mm
  • Gray Ops Mini Plate PRO

    Gray Ops Mini Plate PRO

    $369.99 Add to cart

    FEATURES

    • Plate and clamp housing machined from 6061 Aluminum and Type II Black Anodized
    • Integrated Gray Ops QD Throw Lever Arca Clamp designed and machined in house for smooth, easy attach and detach
    • Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full “Nut” rotation which adjusts the tension .002 per position.
    • QD Throw lever and all internal stress parts machined from Steel and Black Nitrided
    • Same overall dimensions as regular Mini Plate with more ergonomically friendly contours (4.5” width x 6.75” length)
    • 100% Flat Bottom
    • Weight saving cuts for extreme lightweight design (10 oz)
    • Curved Bridge like shape “hugs/grips” over the bag for increased recoil reduction
    • Two ¼-20 threaded holes on bottom for accessories or future adaptability
    • Machined Brass weights INCLUDED
    • BRASS WEIGHTS HAVE A Rough Diamond pattern machined as a textured contact surface to grip bags
    • When added to the Mini Plate PRO, total plate weight is 24 oz.
  • WCD Kydex SA Mag Carrier – Walsh Custom Defence

    $59.99 Select options

    Our WCD Kydex LA Mag Holsters are custom made and are designed to be used with single stack LA detachable box magazines (AICS/ACCURATE). Each holster has an open bottom with a rubber stop, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA . A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available.

    Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster

    NOTE: Standard Belt Clips accommodate belts up to 1/4” thick

    NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws prior to setting desired tension to prevent screws from backing out during use

  • BT46-LW17 PSR Atlas Bipod: Standard height with ADM 170-S Lever

    $449.00 Read more
    • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Fore and Aft pivot limiting Bosses*
    • Non-Rotating Legs: outer leg does not rotate around inner leg*
    • Strengthened Leg Boss*
    • Inner Leg constructed from T7075*
    • Weight 13.61 ounces.
    • Footprint spread 8″–11″
    • Available in black only
    • Made in America
  • IMG_0553_grande

    Short Action Precision ( SAP ) Ckye-Pod Quick Adjust Lever

    $34.99 Add to cart

    WORKS WITH ALL Gen I and Gen II Ckye-Pods

    Are you tired of using an Allen wrench every time you want to adjust the tension on your tilt on your Ckye-Pod? We have the solution!

    Replace that Allen bolt on your Ckye-Pod with this rugged handle. A bipod lever makes for fast tension adjustments, and allows you to also lock it down in any position. This Short Action Precision exclusive accessory is a must have for any Ckye-Pod owner!

    • Installs easily in under 2 minutes with just an Allen wrench
    • Works will all models and generations of Ckye-Pods
    • Compatible with MDT Ckye-Pods
    • 30mm (~1.30″) zinc die-cast handle
    • Stainless steel components
    • Black powder coat finish
  • Tab Gear PRS Pinnacle Rifle Sling with Cobra Buckles & Flush Cup Swivels

    $229.99$239.99 Select options

    TAB GEAR Pinnacle Rifle Sling

    The Pinnacle Rifle Sling, PRS for short, is our latest product in our line of precision rifle slings. The PRS sling is a drastic departure from the precision rifle slings that we have all used for many years. The PRS sling has no arm loop to allow a traditional “slung up” position by putting your arm through a loop. We have talked to military snipers, law enforcement snipers and match shooters all over the world during the last couple of years while we have been developing this sling. We have not found anyone who has actually put their arm in a shooting loop on an actual deployment or law enforcement call out. The only time you’ll see someone sling up in a match is when there is a dedicated positional stage where you have time to sling up.

    That got me to thinking, “why not remove the arm loop altogether and see what happens.” This allows a lot more adjustment range at the front of the sling. This made it possible to do away with all of the excess webbing that was in between the two buckles on our previous models that was there for length of carry adjustment.

    The goal has been to remove as much material as possible from the sling yet maintain the ability to be a marksmanship aid in any shooting position.

    With the PRS sling carried in a Patrol Carry method, muzzle down in front of the body, you are able to use the sling in every position from standing to unsupported prone and never come out of the sling.

    We feel like the PRS sling is the best sling on the market for the military, law enforcement, or match shooter who wants to be able to use a sling as a marksmanship aid in practically every shooting position he may find himself in.

    FEATURES:

    Like all of our slings the rear swivel can be sewn into the webbing for a very tight connection to the rifle. On all of our slings, the PRS sling included, the webbing at the back that has the swivel sewn in we call the “tail”. There has been a significant improvement over the other tails that we have used on all of our slings before this. We have had a few customers who wanted the tail to be stiffer than in our other slings. On the PRS we have installed some material into the tail that dramatically stiffens the tail, this helps in supporting the rifle when a rear bag is not available or feasible.

    Also, like every sling we have ever made there is the option on the PRS to have the rear swivel not be sewn into the tail. This feature allows the shooter to quickly switch out swivels both front and rear should you need to go from one rifle to another rifle that has different sling attachment points.

    The PRS also has two buckles like all of our slings. There are some slings on the market that have one buckle and it is usually in the middle of the sling. A very popular method of carrying the precision rifle is in a Patrol Carry position with the rifle carried muzzle down in the front. With a sling with one buckle this positions the buckle in the middle of the back and impossible to reach, so the vast majority of the time the single buckle is a complete waste. This buckle is accessible when the rifle is carried muzzle up on the back. With two buckles when the rifle is carried in the Patrol Carry position the buckle that is at the tail is easy to reach because it is positioned near the shoulder to allow the shooter to quickly unbuckle the rifle from the body should the need arise.

    If you purchase the PRS with Fastex Buckles they are not sewn into the webbing. They are attached with metal 1-1/2” metal sliders to allow them to be replaced if need be. If you purchase the PRS with the AutriAlpin Cobra buckles they will be sewn in because we are confident that the Aluminum buckle will not become damaged and need to be replaced.

    We can also make the PRS sling with no buckles at all if that is what the shooter desires.

    The Marine Corps has practiced shooting from a tripod for many years with the sling attached to a carabiner on the belt and recently more people have begun using and practicing shooting using this method. On the PRS we have constructed a heavy duty loop out of the webbing that is in between the buckles. The loop is sewn in a way that prevents it from collapsing so it will stay open to allow the shooter to quickly unbuckle the sling from the tail at the back of the sling and clip the loop into a carabiner on the belt. There is enough adjustment range when clipped into a carabiner that this allows the shooter to shoot from a tripod or transition to many different shooting positions by loosening or tightening the sling as needed.

    The 1-1/2” webbing on the adjustment section of the sling does not have the buckle sewn in in either the Fastex nor the Cobra buckle version. This to allow the user to simply cut off and re-melt the webbing should it be determined that that much adjustment range is not needed.

    The release on the quick adjust cam buckle has been changed on the PRS sling by having two layers of 1” webbing sewn together to make the release stiffer. It has also been lengthened and the webbing is folded and bar tacked at the end to create a large “knot” for an easier and more secure grip when releasing tension on the sling.

    We have also installed another triple section of webbing with stiffening material added, like at the tail, that is sewn to the front portion of the quick adjust cam buckle. Anyone who has ever had to shoot from a Hawkins position, which is prone with no bipod touching the ground, and the rifle resting on the clenched fist, has found out that the clenched fist is almost high enough to be comfortable but not quite. The hard point that we have installed directly to the front of the quick adjust buckle acts as a mono pod to support the rifle in a Hawkins position, it will support the full weight of a twenty pound rifle.

     


     FEATURES :

    • 1.5” Mil-Spec webbing construction
    • 1″ Mil-Spec webbing release tab
    • Heavy Duty Metal Quick Adjust
    • ITW Fastex buckles or AustriAlpin Cobra Buckles
    • Integrated loop to attach to a carabiner
    • Made in Texas with US made materials! ????????
    • Lifetime Warranty
  • Armageddon Gear  SHMEDIUM MID-SIZE GAMECHANGER - Waxed Canvas HEAVY FILL

    Armageddon Gear SHMEDIUM MID-SIZE GAMECHANGER – Dark Oak – Waxed Canvas Heavy Fill

    $149.99 Add to cart

    This bag is so good that the only excuse you’re going to have for a miss is a bad wind call. Just when you thought the Game Changer couldn’t get any better we have gone and done it with the new Waxed Canvas Shmedium model. It earns its name because the size is right between our legendary Pint-sized and OG bags, but the shot groups are tighter. If stability offered by Reasor Precision’s previous designs has changed your game, then you will love the support offered by the heavy fill and size combination of the Shmedium. Mobility is also enhanced with the new handle configurations making for more efficient transitions of this sturdy shooting bag. Plus, we have incorporated a new folded access pocket so you can adjust the heavy fill material to your preferred volume level. While some may say that the weight is impractical, Pro shooters will tell you that there is nothing more practical than getting impacts! If you want to turn your barricade shooting into bench-like results then try the Shmedium Game Changer from your friends in all things precision.

  • kestrelPocket

    Armageddon Gear Kestrel Pocket

    $44.99 Select options

    The Kestrel Pocket is purpose-built to securely protect your weather meter against bumps, scratches, dirt and debris. Your meter will ride snugly in a soft, fuzzy, and padded inner layer housed within a Cordura-covered hard-plastic outer shell. Webbing loop provides a convenient way to attach an ITW Tac Link or other tie-down so you don’t lose your gear. Like everything Armageddon Gear manufactures, the Kestrel Pocket is made in the USA!

  • Short Action Precision ( SAP ) .22 Magazine Holder OD Green

    $16.99 Read more

     

    Hold an extra .22 magazine like our famous two rounder right where you need them in a pinch with the SAP .22 Magazine Holder! This little mag holder attaches with Velcro to side of rifle near ejection port. Now you can have easy and quick mag access for your .22 bolt rifles!

    • Sized for CZ455 10 round magazines
    • Perfect for trainers
  • magPouch

    Armageddon Gear 10-round Adjustable AICS/AW Mag Pouch

    $64.99 Select options

    The 10-round Adjustable AICS/AW Mag Pouch securely holds your rifle magazine on either PALS webbing or any belt up to 2 inches in width. The innovative adjustment mechanism allows use with 10-rd AICS mags or shorter 10-rd AW mags and 5rd AICS mags. By adjusting the cord through the pop-lock retainer, you can adjust the height of your mags within the pouch to ensure easy access and removal of different magazine sizes. Made from heavy-duty Milspec nylon webbing for increased abrasion resistance and durability. Velcro-secured flap retains your magazine firmly to prevent noise and movement while allowing rapid withdrawal. Like everything manufactured by Armageddon Gear, the 10-round Adjustable AICS/AW Mag Pouch is proudly made in the USA!

  • inv S427

    $3,434.00 Read more
  • LapuaBrass65

    Lapua 4PH6011: Lapua Brass 6.5 Creedmoor Small Rifle Primer Box- Unprimed 100/Box

    $199.00 Add to cart

    We are happy to announce the addition of the 6.5 Creedmoor case to the Lapua line! Despite a relatively short time on the marketplace, the 6.5 Creedmoor has made a tremendous splash in the field, rapidly becoming one of the most requested cases we hear about from shooters.

    Lapua’s 6.5 Creedmoor is designed to function in a short action, which is also a plus for hunters, vitally concerned with the rifle’s weight and compactness. In fact, many of the same features which make for a successful competition cartridge, translate nicely to the hunting fields as well.

    For most species of mid-size game such as deer or boar, the Creedmoor will prove to be a deadly performer. And while the selection of high grade Match bullets in the 6.5 bore size is tremendous, there’s no shortage of exceptionally good hunting bullets either. The 6.5’s as a group have always been known as excellent performers on game.

    Made with Lapua’s typical dedication to precision, our new 6.5 Creedmoor case has been refined just a bit, to make it an even better performer. We’ve opted for the small rifle primer, which normally produces an optimized ignition and better accuracy than large primers in mid-sized cartridges like the Creedmoor.

    We’ve also incorporated our smaller diameter flash hole (1.5mm, rather than the industry standard 2.0mm), which has proven to provide enhanced accuracy, and is used in a number of our other accuracy oriented cases. In this respect, the new 6.5 Creedmoor joins the ranks of our other dedicated accuracy cartridges such as the .220 Russian (6mm PPC), the 6mm BR Norma, the 6.5×47 Lapua and the .308 Win. Palma cases.

    And naturally, the new 6.5 Creedmoor will be made with our well known Passion for Precision. Strictest control over the metallurgy, the forming and drawing processes, precise annealing all performed under the watchful eyes of our production experts. For you, the handloader, that means the durability for which our cases are famous, combined with consistency and long life. Already proven in competition, we predict that the 6.5 Creedmoor will be a force to be reckoned with for many years to come.

  • Sale! Brass Marker Gray Ops

    Brass Marker Gray Ops

    $68.99 Add to cart

    Mark any 308 bolt face case (6BR, 6.5×47, 308, ect.)

    Quick, easy, perfect lines. Marks in rim of case, across primer, and on body of case. Use one, or all 3 marker locations at the same time.

    Slotted design holds onto rim of case through the entire marking process for perfectly placed lines.

    Accepts any standard sharpie style marker, and secure them at the correct height with the supplied thumb screws.

  • smarma-1

    Armageddon Gear Sticky Gamechanger Pint-Sized Bead Fill

    $179.99 Add to cart

    The Sticky Game Changer by Armageddon Gear

    It’s no secret that we have been experimenting with revolutionary textiles that defy conventional capabilities for durability and downright tackiness. So what happens when you combine this new technology with the most winning shooting bag design in the precision rifle sports? The Sticky Game Changer is born and here to take your stability up a notch or two. Derived from the superior stability offered from our exclusive waxed canvas shell, we applied our new sticky textile to strategic areas of the Game Changer including the gusset, top, and a single side. The sticky textile provides shooters an unparalleled coefficient of friction to areas that contact shooting props, however the textile is not plagued with the Ultraviolet light sensitivity that breaks down common non-slip fabrics over time. Offered in both OG and Pint-sized configurations, the underlying waxed canvas shell is reinforced on specific panels with this indescribably sticky textile to provide a new perspective on what a shooting bag can do for you.

    Specifications: ·

    Waxed Canvas fabric shell comprises the main body in Tan color
    Licensed Sticky fabric panels integrated in Graphite color

    Pint-Sized Sticky Game Changer Attributes:

    Dimensions: 7”L x 4.5”w x 5”T
    Weight: 2.8 lbs
    Handle: Single 1” Tan Wedding Handle
    Fill Type: Standard Fill

    Sticky Game Changer OG Attributes:

    Dimensions: 10″L x 7″T x 6″W
    Weight: 6+ lbs.
    Handle: Double 1.5” Tan Wedding Handles
    Fill Type: Polypropylene
    Zippered access to adjust fill to user desired ratio ·

    Proudly made in the USA · US Patent Number: 10,048,034 · Additional Patents Pending

  • LapuaBrass65

    Lapua 4PH6011: Lapua Brass 6.5 Creedmoor Large Rifle Primer Box- Unprimed 100/Box

    $199.00 Add to cart

    We are happy to announce the addition of the 6.5 Creedmoor case to the Lapua line! Despite a relatively short time on the marketplace, the 6.5 Creedmoor has made a tremendous splash in the field, rapidly becoming one of the most requested cases we hear about from shooters.

    Lapua’s 6.5 Creedmoor is designed to function in a short action, which is also a plus for hunters, vitally concerned with the rifle’s weight and compactness. In fact, many of the same features which make for a successful competition cartridge, translate nicely to the hunting fields as well.

    For most species of mid-size game such as deer or boar, the Creedmoor will prove to be a deadly performer. And while the selection of high grade Match bullets in the 6.5 bore size is tremendous, there’s no shortage of exceptionally good hunting bullets either. The 6.5’s as a group have always been known as excellent performers on game.

    Made with Lapua’s typical dedication to precision, our new 6.5 Creedmoor case has been refined just a bit, to make it an even better performer. We’ve opted for the small rifle primer, which normally produces an optimized ignition and better accuracy than large primers in mid-sized cartridges like the Creedmoor.

    We’ve also incorporated our smaller diameter flash hole (1.5mm, rather than the industry standard 2.0mm), which has proven to provide enhanced accuracy, and is used in a number of our other accuracy oriented cases. In this respect, the new 6.5 Creedmoor joins the ranks of our other dedicated accuracy cartridges such as the .220 Russian (6mm PPC), the 6mm BR Norma, the 6.5×47 Lapua and the .308 Win. Palma cases.

    And naturally, the new 6.5 Creedmoor will be made with our well known Passion for Precision. Strictest control over the metallurgy, the forming and drawing processes, precise annealing all performed under the watchful eyes of our production experts. For you, the handloader, that means the durability for which our cases are famous, combined with consistency and long life. Already proven in competition, we predict that the 6.5 Creedmoor will be a force to be reckoned with for many years to come.

  • MPA Brass Catcher

    MPA Brass Catcher

    $219.99 Add to cart

    Tired of losing brass at your PRS, NRL or Club/Regional Series event? The MPA Brass Catcher is designed for you….

    Attaches via the scope base pic rail on your bolt gun. The wire frame that holds the pouch is adjustable “front to back”and “up and down.”

    Subtle adjustments can also be made to the wire frame to get the exact fit you want.

    The hinge will position the brass catcher closed (up against the ejection port) or open (90 degrees to the ejection port) for easy removal of the brass after your stage.

    Holds 15+ pieces of full size short action caliber brass (308, 6.5 & 6mm Creedmoor, etc) or more of smaller brass types such as 6BR, 6BRA, Dasher, etc.

    Works only with short action cartridges.

  • WCD Ammo Carrier  - Walsh Custom Defence 120 Round

    WCD Ammo Carrier – Walsh Custom Defence 120 Round

    $169.99$174.99 Select options

    Introducing the Walsh Custom Defense Ammo Carrier !!! Gone are the days of toting around bulky bullet boxes and digging through your pack for ammo. Our low profile and compact ammo carrier securely holds up to 120 rounds of Short Action ammunition and can easily fit in a pack. Inside, 4 rigid panels house 120 elastic bullet loops in rows of 10. Located directly below each row of bullet loops, a pocket is provided to protect the tips of your bullets from being damaged. Each carrier is fitted with a nylon carry strap along the top edge, along with Velcro closure. A morale patch loop area is provided on the lower front panel.

    Each carrier is handcrafted in the USA using only the highest quality Milspec materials. Genuine Cordura 1000D fabric is used for the body of the carrier to ensure durabilty, while heavy duty nylon thread is used to ensure stitch strength. Satisfaction Guaranteed !!!

    Closed size: 7.5”x 11” x 2.75” fully loaded

    Weight empty: 1 lb. 9 oz.

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!