Showing 64–84 of 627 results

Filter
  • Fix It Sticks EXTENDED ACTION BITS 5/32"

    Fix It Sticks EXTENDED ACTION BITS 3/16″

    $11.99 Add to cart

    Custom ball end hex bit designed to tighten hard to reach screws.

     

    • Choose 3/16″ for Remington 700, AICS, etc.
    • Choose 5/32″ for Ruger 10/22 V-Block, etc.
    • Choose 1/8″ for KIDD, etc.
    • Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
    • Works with any standard 1/4″ bit driver

    Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.

    Integrates perfectly with T-Way Wrench for shop use.

     

  • Fix It Sticks Pin Punch Set

    Fix It Sticks Pin Punch Set

    $28.99 Add to cart

    Fix It Sticks Pin Punch Set

    Set of Six Pin Punches designed to integrate with the Fix It Sticks System.

    Pin Punches are in the following sizes:

    • 1/16″
    • 3/32″
    • 1/8″
    • 5/32″
    • 3/16″
    • 1/4″

    Pin Punches work with any standard 1/4″ Driver and are machined from solid bar stock.

  • Silent Ammo Carrier TAB Gear

    Silent Ammo Carrier TAB Gear

    $69.99 Select options

    The TAB GEAR SAC addresses the issues that you have to deal with when carrying a lot of ammo.

    The SAC will hold 100 rounds of .308 ammo. It also has ammo loops on the outside that will hold 10 rounds for quick access. There is a divider inside that allows the shooter to easily segregate live rounds from fired brass.
    It is very easy to store fired brass, no more trying to insert them back into shell loops or throwing them into a pack pouch to dig out later. Simply throw the empty brass into the inside compartment of the SAC and they are ready to dump out later.

    1000 Denier Cordura available in Coyote Brown, OD Green, MultiCam, Krpytek Highlander, Black
    Shell loops on the outside to hold 10 rounds for quick access
    PALS webbing on the back for multiple mounting options
    Divider inside to separate live rounds from fired brass
    Heavy duty #10 zipper with 550 cord pull
    Bar tacks at critical wear areas for added strength
    Double stitched binding around edges for added strength
    No more having ammo rattle in boxes as you move
    Empty bag weighs 4.5 ounces, full with 100 rounds of .308 175 SMK rounds is right at 6 pounds

  • MPA BA Bolt Action Mount

    MPA BA Bolt Action Mount

    $374.99 Select options

    The BA Series Mounts are designed to mount high-performance optics onto your Bolt Action rifles with Picatinny Rail Scope Bases. The 1″ & 30mm versions have a center line height of 110%. 34mm models offer push-button fit for either aluminum or steel rails, while 35 mm and 36-inch long scopes can use the standard mounting hole pattern at either end, which measures 125 mils +/- .0015″. This interface ensures positive engagement on both spec positions and specs ones, so you don’t need specialized tools!

  • Norma Brass .300 Norma Mag per 100 ct.

    $330.00 Read more

    100 cases
    .300 Norma Magnum Norma unprimed brass casings

  • fix-it-sticks-bubble-level-set

    Fix It Sticks 700 Bolt Opener

    $29.99 Add to cart

    Access your Remington 700 firing pin quickly and easily in the field with our compact custom bit.

    Remington Bolt Opener

    Levers the firing pin head with a “bottle opener” action
    Molded synthetic polymer bushing protects bolt plug from damage
    Metal ¼” Hex Base allows it to work with any ¼” driver
    Integrates perfectly with Fix It Sticks T-Handle Drivers.
    NOTE: Fix It Sticks/T-handle Not Included

  • Gray Ops Mini Gun Plate V2

    $209.99 Read more

    PURPOSES

    • Increase stability dramatically on barricade style positions
    • Wider surface area for bags to ride on

    FEATURES

    • Machined from 6061 Aluminum and Hard Anodized
    • Mountable on any 1.5″ ARCA rail
    • Low profile integral ARCA clamp
    • Cutouts on bottom for integrating optional brass “grippy” weights DOES INCLUDE BRASS WEIGHTS – PURCHASED SEPARATELY
    • Compatible with Armageddon gear mini pad bag
    • Ultralight weight 10.8 oz and 22.8 oz with brass weights installed
    •  Size 4.5″ x 6.75″
  • insiteBackGreen
  • bt74-atlas-raider-cleat-feet

    BT74: Atlas Raider Spike Feet

    $94.99 Add to cart

    The BT37 Atlas Spike Feet are easily installed with the press of a stainless steel plunger to any V8, PSR or CAL model Atlas Bipod. They deliver a singularly aggressive foot to support the bipod. The Spike portion is approximately 1.45” long with the largest OD of approximately 1”. Sold as a pair. Available in raw stainless with black insert only.

    Weight: 2.7 ounces

    Product will work on V8, PSR and CAL models only.

  • Rem 700 Diamond Trigger

    Rem 700 Diamond Trigger

    $339.99$364.99 Select options

    The TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.

    Intended Use

    Precision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.

  • Lapua 4PH6023: 6.5 PRC Lapua Cases 100/Box

    $249.99 Read more

    Lapua 6.5mm PRC Unprimed Rifle Brass For Sale

    Although the 6.5 Precision Rifle Cartridge (or PRC for short) was originally designed for long range hunting, the 6.5 PRC is still an excellent cartridge for both long range sport shooting and hunting. Its increased case capacity enables velocities up to 80 m/s (262 fps) faster than the 6.5 Creedmoor or 6,555 SE. By design, the cartridge features a longer throat enabling the use of todays popular, high ballistic coefficient (BC) projectiles for long-range competitions. The 6.5 PRC case is a good match with relatively slow burning powder types. It is a great choice for heavy bullets, exceeding even 9,7 g / 150 grains with excellent retained energy and terminal performance for mid-sized and large game.

    Lapua reloading brass is the best cartridge case choice for demanding reloaders

    The base, body and neck of Lapua brass have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that our cases are leaders in uniformity and quality.

    Lapua cases are the best in the world, a statement supported by all top marksmen. The .220 Russian case, for example, is the number one reloading brass choice of the best benchrest shooters all over the world. All our cartridge cases are strong and uniformly precise. Lapua brass is manufactured to be reloaded, again and again. For reloaders who require absolute reliability from their ammunition, Lapua’s pistol and rifle cartridge components is the answer. Something is certain; we never leave our brass behind.

    Specifications for Lapua 6.5mm PRC Unprimed Rifle Brass:

    Gun Type: Rifle
    Bullet Type: Brass
    Caliber: 6.5mm PRC
    Primed: No
    Brass Quantity: 100 Piece

    Features of Lapua 6.5mm PRC Unprimed Rifle Brass:

    • The base of the case: The Lapua case heads are drawn exceptionally hard for unmatched reloadability and for an exceptionally long life cycle to serve top shooters time and time again. The brass dimensions remain constant and will hold primers tight in their pockets even after many reloadings.
    • The brass body: The brass body section of Lapua cases is hard and resilient for unmatched durability. It is easy to extract after firing, whether the reloader opts for full sizing or neck sizing only.
    • The case neck: Strict tolerances in concentrity and wall thickness are used in manufacturing of the case neck. The neck and shoulder of Lapua cases are annealed to withstand repeated reloading.

     

  • inv S428

    $2,401.84 Read more
  • lapua-4ph7098-300-prc-lapua-cases-100-box

    Lapua 4PH7096: 300 Winchester Lapua Cases 100/Box

    $268.00 Add to cart

    Product Description

    The base, body and neck of Lapua brass have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality. This is not loaded ammunition.

    Manufacturer
    Lapua
    Caliber
    .300 Win Mag
    Rounds
    100

  • The “Heathen” Muzzle Brake “LITE” 0.885 6.5CAL 5/8×24

    $225.00 Read more

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The Heathen was specifically designed to produce minimal blast and disturbance directed toward the shooter and spotter reducing fatigue, ground debris disturbance and muzzle jump.

  • Gray Ops Atlas BiPod ARCA Clamp Adapter

    Gray Ops Atlas BiPod ARCA Clamp Adapter

    $148.99 Add to cart

    PURPOSE

    • Attaches to Harris, Cyke-Pod, and Atlas style Bipods
    • Quickly and reliably attach/detach your bipod via our adjustable tension throw lever

    FEATURES

    • Easy/ergonomic gripping of lever for attach/detach
    • Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full “Nut” rotation which adjusts the tension .002 per position
    • QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
    • Main housing machined from 6061 Aluminum and hard coat black anodized
    • Harris bipod version includes QD Arca clamp and Harris adapter
    • Atlas version includes QD Arca clamp
    • Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
  • SPUHR M5X35 TX20 CLAMPING SCREWS 5-PACK

    $9.99 Read more

    Article no.: A-0150

    5-pack

    M5x35 Torx 20 screws for the side clamp (5 pcs) on SP-***1 mounts. The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Includes SS washers.
  • 22 Long Rifle Pelican Case GRAY OPS CNC

    22 Long Rifle Pelican Case GRAY OPS CNC

    $94.99$98.99 Select options

    PURPOSES

    Keep ammo safe and secure
    Waterproof, dustproof, and shockproof case

    FEATURES

    Machined from 6061 Aluminum and Type II Anodized
    Holds 80 round of 22 LR ammo
    Hole spacing lines up with most 22LR box ammo for quick loading
    Clear acrylic slider to secure ammo and dump 10 round rows while holding the rest in place
    Compact
    Machined insert has a precise squeeze fitment into Pelican case
    Small space underneath insert for storage

  • Sale! Bushnell LEGEND TACTICAL 15-45x 60mm T Series Mil-Hash -781545ED

    Bushnell LEGEND TACTICAL 15-45x 60mm T Series Mil-Hash -781545ED

    $869.00 Add to cart

    Built on the groundwork laid by Bushnells original Excursion FLP spotting scopes, the new Legend T Series 15-45x 60mm FLP Spotting Scope with Mil-Hash line reticle delivers exceptional field performance, a bright razor sharp image and a 100% waterproof design that excels in the most unforgiving conditions. The Folded Light path (FLP) design provides the benefits of a long focal length optical path in a relatively short, compact chassis. The ED Prime Extra Low Dispersion glass, fully multi-coated optics, and premium BaK-4 Prisms capture the moment with vivid clarity and contrast, even in low light conditions. Lenses are protected by the ultra-effective Rainguard HD hydrophobic coating, for the clearest possible view in the face of foul weather or condensation from breath. The compact design is lightweight and sets up quickly and easily. It features a reverse eyepiece for minimal exposure and a twist-out eyecup for comfort and optimal eye relief. It also has tactical rails on the top and sides. Features the new Bushnell No Questions Asked Lifetime Warranty. Includes nylon protective in use case and lens caps.

    Features:

    • Mil-Hash Reticle
    • Twist-up eyecups
    • Picatinny rail mounts
    • 100% waterproof
    • Rainguard HD
    • Mil-Hash reticle
    • First focal plane
  • Lapua 4PH7052: 300 AAC Blackout – Lapua Cases 100/Box

    $129.99 Read more

    Few cartridges have generated as much immediate interest as the 300 Blackout. Standardized by AAC, this diminutive cartridge is derived from the 223 Remington. Intended specifically for use in suppressed firearms, the versatility of the Blackout has appealed to a much broader range of shooters than just the audience for which it was originally designed. Intended to drive 220 grain bullets at subsonic velocities, the switch to lightweight bullets such as the 125 grain offerings delivers performance very similar to the venerable 7.62×39 cartridge. This makes the 300 Blackout potent enough for a wide range of shooting tasks, from certain tactical applications to many short range hunting situations involving medium sized game. The ability for many 5.56mm/223 systems to be switched over to the 300 Blackout, merely by changing barrels makes this an incredibly versatile combination. Lapua brings over nine decades of case manufacturing knowledge, precision and quality to the new Blackout, assuring the shooter of the very best performance. Beginning with premium quality materials, carefully processed under the watchful eyes of our experienced production crew, Lapua quality assures correct dimensional tolerances, durability and accuracy throughout the life of the case, loading after loading. Strength, dimensional precision and long reloading life, Lapua’s precision cases are the standard by which all others are measured. Whether you’re after a national championship, or the trophy of a lifetime, Lapua delivers the very best to help you reach that goal.

     

    Sold in Boxes of 100.

  • fix-it-sticks-bubble-level-set

    Fix It Sticks Bubble Level Set

    $64.99 Add to cart

    Level your optics with machined aluminum levels, featuring precise UK-sourced bubble vials

    Kit includes:

    • Magnetic level
    • NATO/Pic rail level/anti-cant device
    • Protective foam carrier with pouch

     

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!