-
Sale!
Gray Ops CNC Hunter Tripod Plate
Original price was: $364.00.$345.80Current price is: $345.80. Add to cartPURPOSE:
- The bag stop was designed to give shooters the ability to “load” into their shooting bag while also preventing any contact to the mag which can cause feeding issues for the rifle. This is especially helpful for 22LR actions to feed reliably.
FEATURES:
- Mounts directly to any 1.5” arca rail via integral clamp
- Does not need to be “slid off” the end of the rail to remove
- One steel hex bolt for installing/removing or repositioning
- Machined from 6061 aluminum
- Black anodize finish
- Length designed for standard 10 round and extended magazines
- Weight – 2.6 ounces
-
Vihtavuori Premium N570 Reloading Powder – 1kg
$169.00 Read moreVIHTAVUORI N570 HEAVY RIFLE POWDER
Vihtavuori’s N570 rifle powder is one of the more recent products in our high-energy powder family. It was developed at the request of magnum cartridge reloaders. We realized that this kind of powder was desired yet lacking on the market, so we decided to develop N570 to meet our customers’ needs.
The characteristics of this high energy powder with its large grain size and high bulk density are developed to bring out the maximum velocities of cartridges with very large volume cases like the 6,5-.284 Norma, the .300 Winchester Magnum, the .300 Remington Ultra Magnum and the .338 Lapua Magnum.
Vihtavuori N570 is very well suited for long-range target shooting and in military applications with big volume cartridges.
N570 is the slowest of our high-energy powders and is an extruded, tubular powder type with grain dimensions of 2,3 mm length and 1,3 mm diameter. Due to the large kernel size (similar to 24N41 and 20N29), we recommend you to always weigh your N570 charges rather than relying on throws from powder measures, as they do not always deliver consistent charges. This way you can avoid under or over-charging cases.
Like all of our N500 series rifle powders, the N570 is manufactured from our own high-quality nitro-cellulose with grains impregnated with nitroglycerine and non-energetic additives. The result: increased muzzle velocity without increased chamber pressure and without increased wear on the gun!
-
FIX IT STICKS Small Torque Limiter 18 INCH LBS FISTL18
$54.99 Read moreTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
Armageddon Gear 52″ Precision Rifle Case
$279.99 Select optionsThe 58″ Armageddon Gear Precision Rifle Case is perfect for suppressed precision rifles. No more unscrewing your suppressor to case your rifle or leaving the butt of the rifle hanging out an open zipper that can’t be closed!
-
Peterson 6mmx47Lapua Brass Cases ( 50ct )
$98.99 Add to cartMost competitive shooters know and respect the caliber 6.5×47 Lapua. But there is another community that really likes the necked down 6×47 Lapua. Most 6×47 shooters dread the tedium of having to neck the 6.5 casings down. Problem solved – Peterson Cartridge now offers factory made 6×47 Lapua.
Many shooters like the 6×47 Lapua because it produces faster velocities. Also the recoil is even less than the relatively low recoil 6.5. Some shooters like the 6×47 because they find that 6mm bullets outperform the 6.5 projectiles.
So Peterson Cartridge has released factory-made, properly headstamped 6×47 Lapua casings.
-
Gray Ops CNC MasterPiece Arms BA Comp Side Rail Weights – Steel
$174.00 Add to cartPURPOSE
- Give the perfect balance point to your MPA BA Comp/Matrix/ESR Chassis when combined with the MPA Competition Side Rails
- Added weight Reduces recoil and adds stability
- Added locations for hand gripping
FEATURES
- Machined from 1018 cold rolled steel
- Black Nitride finish for superior corrosion and rust resistance
- Includes 4 weights (two weights per side)
- Each weight has 3 built in flush cup locations (12 total per kit) for each sling and accessory attachment
- Adds 27.4 ounces per 4 weight kit
- BA Comp Kit Dimensions roughly 0.6 x 0.6 x 5.25”
- Matrix/ESR/Matrix PRO Kit Dimensions roughly 0.5 x 0.6 x 6”
- Hardware to attach to side rails included
NOTE
- Side rails (shown in picture) purchased separately from MPA website must be installed to utilize these weights
-
MasterPiece Arms BA Comp Competition Side Rails – For BA Comp Chassis – Black
$174.99 Read moreCompetition Side Rails, designed for the BA Comp chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.
Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags. The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.
The side rails are compatible with the MPA internal weights and Gray Ops CNC Side Rail Weights, available for purchase separately.
System includes:
- Left and right side rail
- 8 “t-nuts”
- 8 fasteners for attaching the rails to the nuts
- 8 fasteners for attaching to the MPA Internal Weight System.
Compatible only with the BA and BA Comp chassis
Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.
See below for compatibility with various arca clamp products:
- MPA RAT Clamp & RAT Accessories – Compatible
- Area 419 Knob type Arcalock Clamp – Compatible
- GrayOps Mini Plate Pro – Compatible
- GrayOps Mag Cut Mini Plate – Not Compatible
- GrayOps Amp Elite Multi Plate – Compatible
- GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
- Area 419 Harris Bipod Arca Clamp Kit – Compatible
- Really Right Stuff BTC-Pro Clamp – Not Compatible
- Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
- Really Right Stuff SC-LR Throw Lever Clamp – Compatible
- Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
- Cyke Pod Bipods – Compatible
- Cruxord Tripos – Compatible
- Leofoto Tripods with Throw Lever Clamp – Compatible
- RRS Tripos with Throw Lever Clamp – Compatible
To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.
We will continue to update this list.
-
ATLAS BT49: 2.05″ 1913 Adjustable Picatinny Rail
$40.39 Read moreThe BT49 – 2.05″ 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 – 1.6″ with a 1.00″ radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks.
The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Length: 2.05″
- Weight: 0.4 ounces
-
Peterson 6mm Dasher Brass Cases ( 50ct )
$114.99 Read moreFeaturing a 40-degree Ackley-type shoulder and 10 percent more case capacity over the parent 6mm BR case, the 6mm Dasher has been used to set records in the 600 and 1,000-yard benchrest community, and has become a favorite among competitors in the Precision Rifle Series as well.
“The PRS community and the long-range benchrest guys are groups that are important to us” stated Peterson Cartridge president Derek Peterson. “We already make most of the common PRS cartridges, so the 6mm Dasher was naturally next in line for those guys looking to compete with a long-range 6mm, with minimal recoil. The 6 Dasher is one of those cartridges that packs a ton of power and performance in a tiny package, and we decided to make them based on requests from our friends in these disciplines” Peterson said.
The 6 Dasher made by Peterson are offered in Small Rifle Primer (SRP) pocket size only. They have a .060” flash hole diameter, same as Lapua’s small rifle primer pockets. They will require a small de-capping pin, just like Peterson’s 6 BR casings. There is no SAAMI or CIP spec for 6mm Dasher. So, the caliber development guys at Peterson had to decide which dimensions they were going to make their casings to. Regarding Length-To-Shoulder (LTS), Peterson consulted the Sierra, Berger and Lyman reloading manuals and designed the Peterson 6 Dasher casings to comply with the guidance from all three manuals.
Regarding Overall Length (OAL), Peterson researched all the popular chamber reamer sizes, and decided to make its casings with an OAL of 1.53” + or – .0005, so they’ll fit in the common 6 Dasher chambers. The base diameter of Peterson 6 Dasher is the same as the base diameter of its 6 BR casings. Plus, these Dashers have the correct neck wall thickness of .0013”.
Peterson concluded, “No more need to fireform or hydroform 6BRs. Now you can get properly headstamped 6mm Dasher, with the ideal neck wall thickness and harder heads than the other competitors.”
-
Gray Ops MPA Matrix PRO – Internal Weight Kit
$234.99 Add to cartPURPOSE
- Add weight forward of the magazine for better balance
- Increase weight for added recoil reduction and spotting shots
FEATURES
- Machined Steel
- Black Nitride finish for corrosion/rust protection
- Includes 8 total weights (7 Regular/1 Contoured to accept Spigot mount)
- Includes Stainless Steel hardware
- Kit adds 30 ounces for forend
- 6 threaded holes per weight to allow location flexibility
- Installs without removing barreled action from chassis
-
Atlas 5-H & Super CAL BAS Ski Feet BT66
$134.90 Add to cartThe BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5″ 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.
Weight: 6.16 ounces
-
Bix’n Andy – Dakota Trigger, Sako 85
$334.99 Add to cartThe Bix’n Andy Dakota trigger for the Sako series of rifles brings you the performance and durability that has raised the industry standard for over 10 years!The searless trigger design delivers the greatest reliability in all conditions. From mud to snow and even the roughest dust storm, this trigger will provide a perfect ignition break.Bix’n Andy had the Badlands of the Dakotas and demands of all American shooters in mind when designing this trigger for the Sako platform.The Dakota is user adjustable with a single screw adjustment between 1 and 4.5 pounds of precise pull.The Sako Dakota Trigger comes standard with a safety and bolt release. The housing can be easily opened for cleaning and general maintenance for when you get home from a dusty match or muddy expedition, self-eliminating any doubt your rifle is ready for the next shot.Fully Weather Resistant so that you can perform at your best no matter what mother nature throws at you.Searless Design ensures simplicity and total reliability.Single Stage trigger mechanism with a crisp ignition break.Sako Series compatibility.Ideal Over-Travel so that you do not interfere with the rifle’s position during fire.Patented Ball Bearing Design with lifetime support guarantee.100% Precision Machined Parts.1 lbs – 4.5 lbs or 450g – 2,000g Pull Weight adjusted by a single screw while the action is still bedded in the stock. -
Accuracy International AI-0726: AW and AT Rifles 7.62/.308 Doublestack (10 Round)
$124.99 Read moreAccuracy International factory mags for short action 308 AW/AWP and AT rifles. These are 10 round, double stack, double feed magazines.
Specifications
Manufacturer: Accuracy International
Model: AW Rifle/AT Rifle
Caliber: .308 Win Family, 6/6.5 CM, BR/Dasher etc..
Capacity: 10 Round
Material: Steel
Finish: Matte Black
Firearm Fit: Short Action
-
Tab Gear Pollok Shooting Mat with Buckles
$99.99 Select optionsThe Pollok Shooting Mat is a light weight, easily packable mat to keep you off of the dirt, mud, and wet ground with a urethane waterproof coating and a 12″ padded section for elbow protection and comfort on hard surfaces. The compact size can be easily stuffed inside your pack or strapped to the PALS webbing on the outside.
FEATURES :
- Ultra-Compact Design
- 12″ Padded Elbow Section of waterproof foam
- 550 Cord Stake Point on all four corners
- 1″ MilSpec Webbing Straps Keep the mat tightly rolled
- Buckle or D-Ring Closure
- Water resistant 1000D Cordura®
- Made in Texas with US made Materials
- Lifetime Warranty
SPECS :
- Rolled: 4″ x 8″
- Deployed: 30″ x 72″
- 25.6oz.
-
Tab Gear GP Shooting Mat Large
$99.99 Select optionsThe TAB Gear GP Mat allows you or your K-9 to maintain a level of comfort no matter your scenario and surroundings. Two layers of water resistant 1000D Cordura® are hand quilted over a layer of closed cell foam to provide you with just enough padding and protection from the elements while staying small enough for you to pack it wherever you go. A seam down the middle of the foam allows it to be bi-folded, providing twofold the protection!
Whatever your climate, on the cold bleachers at a baseball game, a hot roof hide or the side of a rocky mountain this mat provides that small but noticeable layer of separation to keep you or your K-9 comfortable and efficient.
Two integrated bungee loops allow the mat to be rolled up tightly and fold under the mat when they are not in use. Non-skid rubber panels in the center and on all 4 corners mitigates unwanted movement when deployed on flat surfaces.
FEATURES :
- Integrated shock cord closure loops that fold under mat when in use
- 5 panels of non-skid rubber prevent unwanted movement
- Closed cell foam on the inside, nothing to hold water
- Made from hand quilted 1000 Denier Cordura Nylon
- Webbing is all 1″ Mil-spec
- Made in the USA
- Lifetime Warranty
SPECS :
- Small: 24″ x 30″ / Rolled: 4″ x 12″ | 1000D: 1 lb 2oz / 500D(Arid): 14oz
- Large: 27″ x 40.5″ / Rolled: 4.375″ x 13.5″ | 1000D: 1 lb 10.5oz / 500D(Arid): 1lb 4.5oz
-
Gray Ops Mag-Cut Mini Plate
$214.99 Read moreIntroducing the Gray Ops Mag-Cut Mini Plate, a precision tool designed for increased stability and balance when shooting from Accuracy International / J-Allen Style / similar chassis.
-
Nightforce X-Treme Duty™ Ultralite™ Rings – 4 Screw
$226.00 – $253.00 Select optionsX-Treme Duty™ Ultralite™ Rings are crafted of machined 7075-T6 hard anodized aluminum, with titanium cross bolts and jaws, and 4 titanium screws. This craftsmanship gives you the performance of steel at half the weight.
-
Rem 700 Diamond Trigger LH Pro Curve
$369.99 Read moreThe TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.
Intended UsePrecision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.
-
Bolt Action Coffee – Scope’s Up – Light Medium Roast, Specialty Coffee
$19.00 Add to cartOur Colombian Huila coffee is directly imported from our friends at ASPROTIMANA located in the Huila zone of Southern Colombia. The coffee grows between 1400 and 1900 MASL in a climate that is ideal for producing quality specialty coffees. The signatory flavours include caramel, vanilla, citrus notes and tropical fruits supported by a creamy body and texture.Specialty Whole Bean Coffee
Producer: Small Lot Producers
Country of Origin: Colombia
Region: Huila/Narino
Cultivar: Caturra, Colombia, Bourbon
Process: Washed â Sun Dried
Elevation: 1400 – 1900 MASL
Cupping Number: 86
-
MasterPiece Arms ( MPA ) Ultra Bag Rider
$59.99 Read moreDescription
Our new Ultra Bag Rider combines the benefits of the Enhanced Bag Rider design along with a Butt Hook feature.
This provides a rock solid rear support when using a rear bag when the shooter wants to pull the rifle into the shooters shoulder, improving accuracy performance due to the consistent shoulder pressure applied using this accessory.
The stability this rear bag rider provides is incredible, especially when shooting groups. If youâve ever had some challenges keeping the rifle ultra stable when prone, this accessory will improve performance.
This Ultra Bag Rider works with all BA, BA Comp, ESR, BA Hybrid & BA lite chassis that have a 3 hole pattern on the bottom of the buttstock.
It comes with a black Ultra bag rider, 2 Socket Head Cap Screws, and a turned step shaft designed to be inserted into the monopod slot for installation purposes.
This part is molded and has a lifetime guarantee.
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart