Shop | Insite Arms

ATLAS BT63: Nose Rail
$72.39 Add to cart
The BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock.

Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Overall Length: 7.0″
- Picatinny Rail Section Length: 2.0″
- Center-to-center Hole Spacing: 3″ and 3.75″
- Weight: 2.6 ounces
FALKOR 7EVEN+LONG ACTION , LH Lapua BF
$2,580.00 Add to cart
SPECIFICATIONS:
Billet short action receiver Remington 700TM footprint

Nitride finish

Wire EDM cut lug ways

M16 style extractor

Trigger mount 2 pin (.125)

Integrated recoil lug

Overall picatinny rail length 5.786”

Integrated Self Leveling Scope system (patent pending)

Receiver machined from Prehardened 416ss

20MOA integrated pic rail

Vertical side bolt release, that is much stronger than the standard horizontal

Weight including bolt assembly: 32oz

1 1/16×16 TPI barrel thread tenon

Recoil lug thickness .260

Recoil lug protrusion from action .230

Feed Type: Push

Ejection Port Length: 3.000”

Over pressure safety: Directional Raceway Gas Ports (3 & 9 O’clock)

Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank

Firing Pin spring Force 20lbs

One piece bolt machined from 4340 chrome moly

Fluted bolt to allow debris to be removed from lug ways

Changeable bolt knobs

Plunger ejector

Recessed bolt nose

2 lug 90 degree throw

Billet short action receiver Remington 700TM footprint

Nitride finish

Wire EDM cut lug ways

M16 style extractor

Trigger mount 2 pin (.125)

Integrated recoil lug

Overall picatinny rail length 5.786”

Integrated Self Leveling Scope system (patent pending)

Receiver machined from Prehardened 416ss

20MOA integrated pic rail

Vertical side bolt release, that is much stronger than the standard horizontal

Weight including bolt assembly: 32oz

1 1/16×16 TPI barrel thread tenon

Recoil lug thickness .260

Recoil lug protrusion from action .230

Feed Type: Push

Ejection Port Length: 3.000”

Over pressure safety: Directional Raceway Gas Ports (3 & 9 O’clock)

Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank

Firing Pin spring Force 20lbs

One piece bolt machined from 4340 chrome moly

Fluted bolt to allow debris to be removed from lug ways

Changeable bolt knobs

Plunger ejector

Recessed bolt nose

2 lug 90 degree throw
FALKOR 7EVEN SHORT ACTION , LH STD (308) BF
$2,290.00 Add to cart
SPECIFICATIONS:
Billet short action receiver Remington 700TM footprint

Nitride finish

Wire EDM cut lug ways

M16 style extractor

Trigger mount 2 pin (.125)

Integrated recoil lug

Overall picatinny rail length 5.786”

Integrated Self Leveling Scope system (patent pending)

Receiver machined from Prehardened 416ss

20MOA integrated pic rail

Vertical side bolt release, that is much stronger than the standard horizontal

Weight including bolt assembly: 32oz

1 1/16×16 TPI barrel thread tenon

Recoil lug thickness .260

Recoil lug protrusion from action .230

Feed Type: Push

Ejection Port Length: 3.000”

Over pressure safety: Directional Raceway Gas Ports (3 & 9 O’clock)

Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank

Firing Pin spring Force 20lbs

One piece bolt machined from 4340 chrome moly

Fluted bolt to allow debris to be removed from lug ways

Changeable bolt knobs

Plunger ejector

Recessed bolt nose

2 lug 90 degree throw

Billet short action receiver Remington 700TM footprint

Nitride finish

Wire EDM cut lug ways

M16 style extractor

Trigger mount 2 pin (.125)

Integrated recoil lug

Overall picatinny rail length 5.786”

Integrated Self Leveling Scope system (patent pending)

Receiver machined from Prehardened 416ss

20MOA integrated pic rail

Vertical side bolt release, that is much stronger than the standard horizontal

Weight including bolt assembly: 32oz

1 1/16×16 TPI barrel thread tenon

Recoil lug thickness .260

Recoil lug protrusion from action .230

Feed Type: Push

Ejection Port Length: 3.000”

Over pressure safety: Directional Raceway Gas Ports (3 & 9 O’clock)

Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank

Firing Pin spring Force 20lbs

One piece bolt machined from 4340 chrome moly

Fluted bolt to allow debris to be removed from lug ways

Changeable bolt knobs

Plunger ejector

Recessed bolt nose

2 lug 90 degree throw
Sale!
Gray Ops CNC Precision Scope Mount 35mm dia. / 1.125″h
Original price was: $539.00.Current price is: $496.00. Add to cart
Designed for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.

FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz

Outside Length: 4.85”

Inside Length: 2.55”

Finish: Flat Black

T25 Plus Torx Bit included

Accessories sold separately
Sale!
Gray Ops CNC Rangefinder PLRF 25 Arca Mount
Original price was: $109.00.Current price is: $76.30. Add to cart
PURPOSE:
- Attach to bottom of PLRF25 Vectronix Rangefinders for use in 1.5” Arca Clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins for secure fit onto LRF
- Custom machined for exact fitment and access to battery compartment
- Textured surface for “thumb grip” during offhand use
- Includes ¼-20 screw
Sale!
Fix It Sticks AR-15 ACCESSORY BIT PACK
Original price was: $41.99.Current price is: $29.39. Add to cart

The Fix It Sticks AR-15 Accessory Bit Pack includes three custom bits that will prove indispensable to anyone with an AR/MSR style rifle. Removing carbon from those hard to reach spots on your bolt carrier group is easy with our Bolt Carrier Group Scraper bit. The Castle Nut Wrench bit makes short work of tough castle nut adjustments on your rifle. And you can quickly dial in your front sight with our four-prong A1 Front Sight bit. Each fits any standard 1/4″ driver, including Fix It Sticks tools or our T-Way Wrench.

The pack includes:

• Bolt Carrier Group Scraper Bit

• Castle Nut Wrench Bit

• A2 Front Sight Bit
SPUHR MOUNT R-7021 TIKKA T3 SCOPE BASE 0MIL
$149.99 Add to cart

Article no.: HP30-25A

Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz
SPUHR MOUNT HP30-19A PICATINNY AESTHETIC RINGS Ø30 H19/0.75″
$264.99 Add to cart

Article no.: HP30-25A

Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz
SPUHR MOUNT HP40-30A PICATINNY AESTHETIC RINGS Ø34 H30/1.18″
$264.99 Add to cart

DESCRIPTION

Article no.: HP40-30A

Aesthetic hunting rings for 34 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 30 mm/1.18″ Weight: 115 gram/4.1 oz
Bix’n Andy TacSport Top Sear Med. 3.8mm
$48.00 Add to cart

The TacSport Pro is the latest addition to our TacSport line. It was developed to meet the growing needs of our customers that wanted a trigger that was great in rugged condition like our TacSport and also has an even lower pull weight. Designed to operate in Remington 700 and compatible actions, the new triggers will have an adjustable pull force between 3.5 ounces to 35 ounces (100 grams to 1,000 grams). The ball system allows for the lowest reset force of any trigger, thereby improving accuracy and allowing for a very crisp let-off. The TacSport is machined from stainless steel with a housing designed to further protect the mechanism from the elements and will come standard with a safety lever and a removable bolt stop.
FALKOR 7EVEN SHORT ACTION , RH STD (308) BF
$2,290.00 Add to cart
SPECIFICATIONS:
Billet short action receiver Remington 700TM footprint

Nitride finish

Wire EDM cut lug ways

M16 style extractor

Trigger mount 2 pin (.125)

Integrated recoil lug

Overall picatinny rail length 5.786”

Integrated Self Leveling Scope system (patent pending)

Receiver machined from Prehardened 416ss

20MOA integrated pic rail

Vertical side bolt release, that is much stronger than the standard horizontal

Weight including bolt assembly: 32oz

1 1/16×16 TPI barrel thread tenon

Recoil lug thickness .260

Recoil lug protrusion from action .230

Feed Type: Push

Ejection Port Length: 3.000”

Over pressure safety: Directional Raceway Gas Ports (3 & 9 O’clock)

Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank

Firing Pin spring Force 20lbs

One piece bolt machined from 4340 chrome moly

Fluted bolt to allow debris to be removed from lug ways

Changeable bolt knobs

Plunger ejector

Recessed bolt nose

2 lug 90 degree throw

Billet short action receiver Remington 700TM footprint

Nitride finish

Wire EDM cut lug ways

M16 style extractor

Trigger mount 2 pin (.125)

Integrated recoil lug

Overall picatinny rail length 5.786”

Integrated Self Leveling Scope system (patent pending)

Receiver machined from Prehardened 416ss

20MOA integrated pic rail

Vertical side bolt release, that is much stronger than the standard horizontal

Weight including bolt assembly: 32oz

1 1/16×16 TPI barrel thread tenon

Recoil lug thickness .260

Recoil lug protrusion from action .230

Feed Type: Push

Ejection Port Length: 3.000”

Over pressure safety: Directional Raceway Gas Ports (3 & 9 O’clock)

Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank

Firing Pin spring Force 20lbs

One piece bolt machined from 4340 chrome moly

Fluted bolt to allow debris to be removed from lug ways

Changeable bolt knobs

Plunger ejector

Recessed bolt nose

2 lug 90 degree throw
Sale!
Bushnell Elite Tactical 1×32 Multi-Dot Red Dot Sight 5L ET71X32
Original price was: $749.00.Current price is: $399.00. Add to cart

The Bushnell Elite Tactical CQTS II , Bushnell’s flagship red dot , features four reticles and industry-leading battery life that exceeds 50,000 hours.

– Black with Dot, Circle Dot, Crosshair Dot, Circle Crosshair Dot reticle
– Multi Reticle – Multi reticle is able to switch between 4 distinct reticles for versatility in any situation.
– Extended Battery Life – Designed to maximize the lifespan of your batteries.
– Adjustable IR brightness
Redding – Heat-Treated Steel Neck Sizing Bushing 0.336″
$28.99 Add to cart

Redding – Heat-Treated Steel Neck Sizing Bushing

Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
Redding – Heat-Treated Steel Neck Sizing Bushing 0.334″
$28.99 Add to cart

Redding – Heat-Treated Steel Neck Sizing Bushing

Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
Redding – Heat-Treated Steel Neck Sizing Bushing 0.289″
$28.99 Add to cart

Redding – Heat-Treated Steel Neck Sizing Bushing

Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.
Micron Precision Series – Neck Sizing Bushing 0.288″
$54.99 Add to cart
Micron Precision Series – Neck Sizing Bushing 0.287″
$54.99 Add to cart
Micron Precision Series – Threaded Seater & Sizer Die Set – 6.5x47L
$859.00 Add to cart
Micron Precision Series – Sizer & Seater Die Set
- Each die blank is caliber specific in length
- JGS resize reamers are used to chamber the dies
- Sub 0.0002″ runout from OD to bushing pocket and die chamber
- Hand polished and inspected before surface treatment
- All dies come with a bushing retainer cap for full neck sizing. Bushing retainer caps for partial neck sizing sold separately
Micron Precision Series – Threaded Seater & Sizer Die Set – 6mmBR
$859.00 Add to cart
Micron Precision Series – Sizer & Seater Die Set
- Each die blank is caliber specific in length
- JGS resize reamers are used to chamber the dies
- Sub 0.0002″ runout from OD to bushing pocket and die chamber
- Hand polished and inspected before surface treatment
- All dies come with a bushing retainer cap for full neck sizing. Bushing retainer caps for partial neck sizing sold separately
Micron Precision Series – Threaded Seater & Sizer Die Set – 6.5 Creedmoor
$859.00 Add to cart
Micron Precision Series – Sizer & Seater Die Set
- Each die blank is caliber specific in length
- JGS resize reamers are used to chamber the dies
- Sub 0.0002″ runout from OD to bushing pocket and die chamber
- Hand polished and inspected before surface treatment
- All dies come with a bushing retainer cap for full neck sizing. Bushing retainer caps for partial neck sizing sold separately
Micron Precision Series – Threaded Seater & Sizer Die Set – 6mm BRA
$859.00 Add to cart
Micron Precision Series – Sizer & Seater Die Set
- Each die blank is caliber specific in length
- JGS resize reamers are used to chamber the dies
- Sub 0.0002″ runout from OD to bushing pocket and die chamber
- Hand polished and inspected before surface treatment
- All dies come with a bushing retainer cap for full neck sizing. Bushing retainer caps for partial neck sizing sold separately