-
-
Sale!
MasterPiece Arms Matrix Chassis
$1,649.00 – $1,780.00 Select optionsThis is and enhanced version version of our highly successful BA Chassis System.
The Matrix Chassis was designed as a the most revolutionary chassis ever produced. With the multitude of configurations in grips, thumb rests and trigger finger supports, the primary interface between the shooter and the rifle (the grip) has over 100 different options. Please refer to the photos above to see our data on shooter preference on the grips, thumb rests, and trigger finger supports.
-
Sale!
OBi LINK SYSTEM — GRIP ON ROUND
Original price was: $159.99.$119.99Current price is: $119.99. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 10 RND – no binder plate
$79.99 Add to cartThese magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Available with or without the front binder plate. See details below for benefits and limitations of each version.
-
Fix It Sticks EXTENDED ACTION BIT PACK – 6 BITS
$59.99 Add to cartCustom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
-
Gray Ops Brass Weights for Mini Plate V2
$62.99 Add to cartEnhance your shooting stability with the Brass Weights for Mini Plate V2 from Gray Ops CNC, an optional add-on that increases recoil reduction and grip by adding 12 ounces of weight.
-
-
Sale!
Gray Ops Ckye-Pod ARCA Clamp Adapter
Original price was: $198.99.$188.00Current price is: $188.00. Add to cartPURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) SHORT Action HUNTER
$279.00 Read moreThe Hunter Detachable Box Magazine (DBM) bottom metal is designed for shooters that are looking for a flush mounted bottom metal that will accept AICS pattern magazines. The bottom metal is machined from a single piece of billet 6061 and features a patented cantilever spring mag release system that will not open under heavy recoil. The magazine release is also adjustable, sleek and all but impossible to actuate accidentally.
The Hunter DBM is made to fit into an M5 inlet. It is available for Remington 700 actions, and all Remington 700 clones. Comes with pillars and action screws.
Short Action Weight: 3 Ounces / Long Action Version Under Development
-
-
Armageddon Gear Ultra Light Shooting Mat Coyote Brown
$174.00 – $174.99 Select optionsThe Armageddon Gear Ultralight Shooting Mat is the perfect solution when you need a compact and lightweight mat!
-
Armageddon Gear “THE BRICK” Grippy Rear Bag
$59.00 Select optionsArmageddon Gear introduces “THE BRICK,” a revolutionary rear shooting bag designed for optimal control and reduced fatigue. Featuring a robust “Grippy” rubberized texture, this gun bag locks your rifle stock firmly with the support surface for a rock-solid shooting position.
-
Bix’n Andy TacSport PRO Rem700 Single Stage Trigger – Top Right Safety – Smooth Curve Shoe
$399.00 Add to cartThe TacSport Pro is the latest addition to our TacSport line. It was developed to meet the growing needs of our customers that wanted a trigger that was great in rugged condition like our TacSport and also has an even lower pull weight. Designed to operate in Remington 700 and compatible actions, the new triggers will have an adjustable pull force between 3.5 ounces to 35 ounces (100 grams to 1,000 grams). The ball system allows for the lowest reset force of any trigger, thereby improving accuracy and allowing for a very crisp let-off. The TacSport is machined from stainless steel with a housing designed to further protect the mechanism from the elements and will come standard with a safety lever and a removable bolt stop.
-
Lapua 4PH6046: 6mm BR Norma Lapua Cases 100/Box
$159.99 Read moreLapua LU4PH6046 6mm BM Norma Lapua Cases 100/box
The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
The most precise cases on the marketLapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
Lapua cases are manufactured to be reloaded, again and again, dozens of times.
Case construction
Base
The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
Body
The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
Neck
Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading. -
SPUHR SP-4001C Ø34 H30mm 0MIL PIC
$559.00 Read moreArticle no.: SP-4001
0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion. -
BIX’N ANDY TRIGGER TAC SPORT TWO STAGE LEFT OR RIGHT TOP SAFETY FOR REMINGTON 700 AND CLONES
$449.00 Select optionsFor the first time Bix’n Andy comes to the sporting and tactical rifle with the TacSport Rem700 Trigger Pull Force can be set as low as 10 ounces and all the way up to 4.5 pounds Extra Feature: To work the safety move it slightly outwards and then forward. This can be changed so you only have to push it forward by removing a pin. The Bolt Stop Release is removable Available in Single & Two-Stage configurations as well as Left or Right Top Safeties in each configuration. THIS IS THE TWO STAGE MODEL AT THIS TIME WE DON’T RECOMMEND THESE TRIGGERS FOR SURGEONS AND BIG HORN TL-3. THERE HAVE BEEN ISSUES WITH THE SEAR ENGAGEMENT.
-
Gray Ops CNC Garmin Xero QD Mount (Mount Only)
$115.00 Add to cartGarmin Mount Kit: Mount Only
PURPOSE
- The Gray Ops Garmin QD Mount was designed to be the most versatile, user configurable mount on the market for the Garmin XERO C1 Pro Chronograph.
- Quickly and reliably attach/detach to any Picatinny Rail system or Arca clamp with our new patent pending QD system.
- Multiple Mounting Options allows you to tailor the Garmin to your exact needs on the fly.
NOTES
- Comes in 3 configurations
- Garmin QD Mount: Mount Only
- Garmin QD Mount w/ Arm: Mount, Extension Arm, buyer provides their own ARMS 17 compatible arca clamp
- Garmin Mount Kit: Mount, Extension Arm, and QD Throw Lever Arca Clamp
-
Fix It Sticks LONG RANGE COMPETITION TOOLKIT with ALL-IN-One Torque Driver
$389.99 Add to cartPrecision is the name of the game in long-range shooting, and Fix It Sticks’ Long-Range Competition Toolkit will help you keep your high-performance rifle in peak running condition while in the field.
Use this comprehensive assortment of tools in even the most austere conditions. With it, you can tighten down your optics, action and accessories to the correct torque to ensure precise round placement, shot after shot.
The Long-Range Competition Toolkit includes:
- Ratchet T-Handle w/Locking Hex Drive
- 15, 25, 45, 65 in-lbs torque limiters or All-In-One Torque Driver
- 1/2″ Socket/Adapter
- Mini Pry Bar
- Pin Punch Set (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 1/4″)
- Bronze Scraper
- Steel Pick
- Cleaning Brush Bit
- Set of two 8-32 adapters
- Machined Aluminum Bubble Level Set, which includes: magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials
- Stainless Steel Rod Set (6) with .223/6.5/.30 Brass Adapters & Ball Bearing Drive (locks into T-handle, assembles to 44″)
- 3/16″ Extended Action Bit
- 5/32″ Extended Action Bit
- 24 Chrome Plated Bits: T8, T10, T15, T20, T25, T27, T30, P1, P2, [Hex 0.050″, 5/64″, 3/32″, 1/8″, 7/64″, 9/64″, 5/32″, 3/16″, 1/4″, 2.5mm, 3mm, 4mm, 5mm] [Slotted 3/16″, 3/32″]
- Magnetic Velcro Patch
- Micro Fiber Lens Cloth
- Torque Value Reference/Conversion Card
- Soft Carrying Case with molded, low-profile bit holders designed to hold any bit / accessory with a standard 1/4″ Base
-
Gray Ops CNC – Bag Stop – Mini Plate Mount
$129.00 Add to cartIntroducing Gray Ops CNC Bag Stop – Mini Plate Mount, the perfect shooting accessory to enhance stability while avoiding magazine contact, ensuring reliable feeding for your rifle. Designed for use with Mini Plate V2 and Mini Plate PRO, this bag stop is lightweight, expertly contoured, and easy to install with two steel hex bolts.
-
Bix’n Andy TacSport Trigger Shoe 90 Degree
$49.99 Add to cartThe shooters asked and Bix’n Andy answered!
These exchangeable trigger shoes are for shooters that want to customize their trigger experience. Four different styles to choose from and they’re easy to swap out.
The Smooth Curved Shoe is what the Bix’n Andy Benchrest triggers use. It is wider than the original TacSport shoe and is an absolute favorite among shooters around the world.
The Gator Grip is the same width as the Competition shoe, but has a very appealing gator traction machined into the aluminum trigger shoe. This traction is very satisfying to the touch and provides an extra sense of touch when utilizing a light trigger pull weight in a tactical competition or cold hunting conditions.
Hunters around the world have come to enjoy a ribbed trigger shoe. This smooth, wide shoe has 3 grooved ribs machined into the surface that offers a nice sense of finger location on the trigger.
Finally, the 90º shoe is a wide and straight shoe that tactical shooters have come to love in many competition shooting disciplines. This shoe is vertical in relation to the rifle receiver and has a nice hook on the bottom to offer better finger orientation on the shoe.
-
HRD GEAR 6MM MAGAZINE SPACER KIT & AIAW Double Stack Magazine Package
$189.99 Read moreThe HRD GEAR 6mm magazine spacer kit is designed to make the popular 6BR case and it’s variant cases run flawlessly in the AW/AX magazines (part numbers 0726 and 6677). The back spacer is a press fit and clips into place from the top of the mag. There is a small hole to aid in removal of the back spacer (the tip of a bullet fits perfectly). THERE ARE NO TOOLS OR MODIFICATIONS NEEDED OR REQUIRED TO INSTALL THIS SPACER KIT.
Also Included:
Accuracy International factory mags for short action 308 AW/AWP and AT rifles. These are 10 round, double stack, double feed magazines.
Model: AW Rifle/AT Rifle Or Custom Action Able to accept AW Mags ( ie. not factory 700 actions with integrated feed lips )
Caliber: .308 Win Family, 6/6.5 CM, BR/Dasher etc..
Capacity: 10 Round
Material: Steel
Finish: Matte Black
Firearm Fit: Short Action
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart