-
Sale!
LAPUA – .222 REM. MATCH RELOADING CASES – BOX OF 100
Original price was: $144.99.$137.74Current price is: $137.74. Add to cart4PH5002
Lapua offers new improved design case for friends of this accurate caliber. The .222 case is a true match case produced with extremely tight tolerances in neck concentricity and wall thickness like its big brother .223 Rem. Lapua Match case. The true Lapua match quality is now available also for the small game hunters.
-
Tab Gear Pollok Shooting Mat with Buckles
Select options This product has multiple variants. The options may be chosen on the product pageThe Pollok Shooting Mat is a light weight, easily packable mat to keep you off of the dirt, mud, and wet ground with a urethane waterproof coating and a 12″ padded section for elbow protection and comfort on hard surfaces. The compact size can be easily stuffed inside your pack or strapped to the PALS webbing on the outside.
FEATURES :
- Ultra-Compact Design
- 12″ Padded Elbow Section of waterproof foam
- 550 Cord Stake Point on all four corners
- 1″ MilSpec Webbing Straps Keep the mat tightly rolled
- Buckle or D-Ring Closure
- Water resistant 1000D Cordura®
- Made in Texas with US made Materials
- Lifetime Warranty
SPECS :
- Rolled: 4″ x 8″
- Deployed: 30″ x 72″
- 25.6oz.
-
Tab Gear GP Shooting Mat Large
Select options This product has multiple variants. The options may be chosen on the product pageThe TAB Gear GP Mat allows you or your K-9 to maintain a level of comfort no matter your scenario and surroundings. Two layers of water resistant 1000D Cordura® are hand quilted over a layer of closed cell foam to provide you with just enough padding and protection from the elements while staying small enough for you to pack it wherever you go. A seam down the middle of the foam allows it to be bi-folded, providing twofold the protection!
Whatever your climate, on the cold bleachers at a baseball game, a hot roof hide or the side of a rocky mountain this mat provides that small but noticeable layer of separation to keep you or your K-9 comfortable and efficient.
Two integrated bungee loops allow the mat to be rolled up tightly and fold under the mat when they are not in use. Non-skid rubber panels in the center and on all 4 corners mitigates unwanted movement when deployed on flat surfaces.
FEATURES :
- Integrated shock cord closure loops that fold under mat when in use
- 5 panels of non-skid rubber prevent unwanted movement
- Closed cell foam on the inside, nothing to hold water
- Made from hand quilted 1000 Denier Cordura Nylon
- Webbing is all 1″ Mil-spec
- Made in the USA
- Lifetime Warranty
SPECS :
- Small: 24″ x 30″ / Rolled: 4″ x 12″ | 1000D: 1 lb 2oz / 500D(Arid): 14oz
- Large: 27″ x 40.5″ / Rolled: 4.375″ x 13.5″ | 1000D: 1 lb 10.5oz / 500D(Arid): 1lb 4.5oz
-
Bolt Action Coffee – Scope’s Up – Light Medium Roast, Specialty Coffee
$19.00 Add to cartOur Colombian Huila coffee is directly imported from our friends at ASPROTIMANA located in the Huila zone of Southern Colombia. The coffee grows between 1400 and 1900 MASL in a climate that is ideal for producing quality specialty coffees. The signatory flavours include caramel, vanilla, citrus notes and tropical fruits supported by a creamy body and texture.Specialty Whole Bean Coffee
Producer: Small Lot Producers
Country of Origin: Colombia
Region: Huila/Narino
Cultivar: Caturra, Colombia, Bourbon
Process: Washed â Sun Dried
Elevation: 1400 – 1900 MASL
Cupping Number: 86
-
MasterPiece Arms MATRIX Chassis COMPLETE Internal Weight Tuning KIT – MPA
$174.99 Add to cartThe Complete Weight Tuning Kit for the full size BA/Comp Chassis & ESR Chassis includes the following:
- Steel Enhanced Bag Rider – 1.2 lbs
- Steel Monopod Weight – 1 lb
- Front Fore-end Weight – 1.2 lbs
- Rear Fore-end Weight – 1 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
- Fasteners for Attaching the Bag Rider and Monopod Weight
-
-
Sale!
Fix It Sticks AIMPOINT BIT
Original price was: $14.99.$10.49Current price is: $10.49. Add to cartCustom bit designed to aid in the adjustment of Aimpoint Sights.
Aimpoint Adjustment Bit
- Two prong design specifically works with the windage and elevation adjustment knobs.
- Semi-circular wings designed to fit “coin-slot” style adjustment knobs / battery covers.
- Molded synthetic polymer won’t mar or scratch the finish of the sight.
- Metal ¼” Hex Base allows it to work with any ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
Bix’n Andy – Dakota Trigger, Remington 700, Top Right Safety
$299.00 Add to cartBix’n Andy – Dakota Trigger, Remington 700, Top Right Safety
WEIGHT 0.25 lbs DIMENSIONS 4 × 3 × 1 in BRANDS Bix’n Andy RIFLE PART BRANDS Bix’n Andy RIFLE PART USAGE Triggers TRIGGER BRAND Bix’n Andy TRIGGER MODEL Dakota TRIGGER PURPOSE Hunting / Varmint, Precision Rifle TRIGGER RIFLE MODEL Remington 700 TRIGGER STAGE Single Stage TRIGGER SAFETY POSITION Top Right Safety TRIGGER SHOE STYLE Standard Shoe -
Insite Arms T-Shirt Tri-Blend Ladies
$39.99 Select options This product has multiple variants. The options may be chosen on the product page -
Insite Arms Loading Block 100 ct. Each Side Used for different Case Sizes- 2″ THICK BLOCK
Select options This product has multiple variants. The options may be chosen on the product pageMilled from a solid 14″ x 2″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:
This Block can accommodate holes for cartridges on both sides Top and Bottom. This allows the block to be used for 2 different sized cartridges.
-100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands
-At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred
– Includes a generous sized Bullet or Parts tray for convenience.
– The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.
Dimensions: 14″x 6″x 1″
-
Armageddon Gear Ultralight Shooting Mat
Select options This product has multiple variants. The options may be chosen on the product pageDiscover the Armageddon Cheeky Bastard, your go-to solution for comfort and customization when you’re up close and personal with your scope’s eyebox. Lightweight, cleverly designed, and adjustable for all head sizes.
-
Sale!
OBi LINK SYSTEM – Round Plate
Original price was: $55.99.$33.59Current price is: $33.59. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
Sale!
OBi LINK SYSTEM – P-A Quick Mount
Original price was: $144.99.$86.99Current price is: $86.99. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
Sale!
OBi LINK SYSTEM – U-Plate – Black
Original price was: $18.99.$11.39Current price is: $11.39. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
Sale!
OBi LINK SYSTEM – U-Plate ARCA – Black
Original price was: $18.99.$11.39Current price is: $11.39. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
MasterPiece Arms ( MPA ) EVG Left hand insert
$24.99 Add to cartThis insert is designed to be used with a standard Right Handed EVG (Enhanced Vertical Grip) for shooters who want the Thumb Notch and Trigger Finger support on the left side of the grip surface.This 3D printed component will attach to your chassis via 2 oblong bosses on the insert plus double sided 3M PSA adhesive. Very simple, quick and easy to install.So if you are left handed shooter and want to be able to utilize the benefits of the EVG, this is a great option. -
MasterPiece Arms ( MPA ) Mag Block Insert
$14.00 Add to cartMag Block Insert
This insert is designed to fit into the mag catch slot in Short Action MPA BA, BA Comp & Hybrid Chassis. This part was originally designed to work with Curtis Custom Vector Actions, for customers who wanted to run AICS magazines (on an AW Cut Action), to eliminate the gap before the AICS mags make contact with the action. However, we have also found these very useful for eliminating feeding issues when a competition shooter is putting weight or pressure on either the bottom or front of their magazine, such as when shooting from a barricade.
When installing these, after you have verified fit and tested with a magazine, we recommend that you remove the insert and place some adhesive to the top flat surface to make contact with the top of the pocket in the mag slot in the chassis. Superglue or similar is recommended.
Slight polishing may be required for proper fit. You will receive (1) Version 1 and (1) Version 2 inserts with each order. Please watch the video below for installation instructions.
-
Tab Gear Gen II Rifle Cover Extra long up to 52″
Select options This product has multiple variants. The options may be chosen on the product pageProtect your rifle from the elements. Whether you are carrying your rifle in the field or it’s sitting on the line with the bipod legs down. Dirt, mud, grass, dust, water, or sunlight cannot reach your rifle when a TAB Rifle cover is protecting it.
- Made from 1000 Denier Cordura Nylon
- Webbing is all 1″ Milspec
- Carry handle for convenient transport of rifle
- Scope and muzzle areas protected with closed cell foam padding
- Heavy duty Milspec D-rings for attaching rifle cover to pack
- Fastex buckles for easy access
- Rifle slings still available for normal carry
- Bipod legs can be fully enclosed for carry or left out for rapid deployment # Compact size when folded, fits into BDU cargo pocket
- Weighs less than 19 ounces
- Keeps rifle protected and cooler in the sun
All Rifle Covers are custom made orders. Please allow 14-21 days for the cover/covers to be made and shipped.
Models Available
GEN I:
Fits sporter style stocks, McMillan HTG(M40A1), Win. HBV, Remington PSS, FN SPR, etc. to an OAL of 46″ and scopes to 24″ in length.
GEN II:
Fits the Accuracy International, M25, McMillan A-Series, and TRG stocks to an OAL of 46″ and scopes to 24″ in length.GEN III:
Fits SR25 and AR10 with an overall length of 46″ and scopes up to 21″. -
Sale!
Gray Ops CNC – Brass Magneto Speed V3 Mount Angled Adapter
Original price was: $35.00.$24.50Current price is: $24.50. Add to cartElevate your shooting precision with the Gray Ops Brass Magneto Speed V3 Mount Angled Adapter, expertly designed to ensure perfect parallel alignment of the Magneto Speed V3 Bayonet to your angled forends on hunting or traditional style stocks/chassis.
-
WCD Kydex Tikka Mag Carrier – Walsh Custom Defence
$59.99 Select options This product has multiple variants. The options may be chosen on the product pageOur WCD Kydex SA Mag Holsters for Tikka magazines are custom made, one at a time and hand fitted before shipping. Each holster has an open bottom with a rubber stop, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA . A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available. Other colors available upon request.
Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster
NOTE: Standard Belt Clips accommodate belts up to 1/4” thick
NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws prior to setting desired tension to prevent screws from backing out during use
-
Insite Arms Barrel Tuner – For 1.125″ Heathen 5/8×24 thread Black Nitride
$200.00 Add to cartBarrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.
The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.
Shopping Cart