*Made with a heavy duty 3D printed material, tool may have some slight surface imperfections, which is normal.
Showing 22–42 of 94 results
Filter-
Insite Arms Barrel Tuner – For 0.885″ Heathen 5/8×24 thread Black Nitride
$200.00 Add to cartBarrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.
The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.
-
Fix It Sticks FIX IT STICKS MINI FLASHLIGHT
$29.99 Add to cartHave a miniature light in your Fix It Sticks case.
Mini Flashlight
- Great for finding small parts in the dark or for Bore Inspection
- Twist on / off operation
- Batteries Included (Four LR41)
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench.
-
Fix It Sticks 65, 45, 25 & 15 INCH LBS KIT WITH DELUXE CASE, T-HANDLE, AND EXTENDED BIT FISTLS11-T-EB316
$255.00 Read moreKit includes:
- 65 Inch Lbs miniature torque limiter
- 45 Inch Lbs miniature torque limiter
- 25 Inch Lbs miniature torque limiter
- 15 Inch Lbs miniature torque limiter
- T-Way T-Handle Wrench
- 16 different bits: T10, T15, T20, T25, T30, P1, slotted 5mm [hex 5/64, 3/32, 1/8, 5/32, 3/16, 2.5mm, 3mm, 4mm, 5mm]
- 1/2″ Socket and 1/4″ bit adapter set
- Deluxe Zippered pouch
- Extended 3/16″ Ball End Hex bit designed to reach the action screws of such Chassis systems as JAllen, Accuracy International, Remington 700, and Masterpiece Arms.
-
FIX IT STICKS Large Torque Limiter 65 INCH LBS FISTL65
$54.99 Add to cartTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 5,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
1 Set of Fix It Sticks, 65 & 25 Inch lbs Torque Limiters, 16 Bits, 1/2″ Socket & 1/4″ Bit Adapter, Deluxe Case FISTLS11
$169.99 Read moreThis Fix it Sticks set comes with 65, 45, 25 and 15 inch lbs torque limiters. It also includes 16 bits, a 1/2″ Socket, 1/4″ bit adapter and a Tactical Tailor Deluxe Case. The “T-Handle” shown in the image is NOT a permanent T-Handle but two “sticks” that fit together to make a T-Handle and come apart to fit in the case for easy storage.
-
Fix It Sticks Bit Extension
$19.99 Add to cartFix It Sticks Bit Extension that can be used with our T-Handle Wrenches for hard to reach screws and fasteners.
- 3.5 Inches in Length (not including male hex portion)
- Magnetic end accepts any standard 1/4″ Bit
-
Fix It Sticks 6 Bit Holder – Set of 2
$8.99 Add to cart6 Bit holder holds six 1/4″ Bits. Come in a set of two.
-
Fix It Sticks BRASS HAMMER HEAD
$15.99 Add to cartBRASS HAMMER HEAD
designed to integrate with the Fix It Sticks System. Steel insert in base enables them to be used with magnetic drivers.
Note: T-Handle Driver not included
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
-
Fix It Sticks CLEANING ROD KIT
$156.99 Add to cartPlease note that for the Cleaning Rod Kit to work either a Modular T-Drive or single Fix It Stick is required.
Expand the functionality of your Fix It Sticks.
Compact cleaning rod / bore obstruction kit features precision machined stainless steel rods and interchangeable brass adapters (for both .22 and .30) to protect the rifle bore.
Double ball bearing adapter ensures a smooth operation and enables the cleaning attachments to follow the bore’s rifling.
Assembles up to 44 inches.
Kit Contains:
- Six precision machined stainless steel rods (8-32 thread)
- Six .22 caliber brass bore adapters
- Six .30 caliber brass bore adapters
- .22 caliber obstruction tip
- .30 caliber obstruction tip
- Double ball bearing drive adapter
- Carrying Case
-
Fix It Sticks ALL-IN-ONE TORQUE DRIVER
$63.99 Read moreDescription
Use Fix It Sticks’ All-in-One Torque Driver to tighten down scope rings, mounts, actions screws, etc. while in the field, at the range, or at home, with +/- 10% accuracy. You’ll never over or under tighten critical components again.
It’s easy to use, too. Turn the drive handle until the hash mark lines up with the torque value you need (from 15 – 65 in-lb) and you’re ready to get to work. The All-in-One Torque Driver accepts any standard 1/4″ bit, fits into any standard 1/4″ driver and integrates perfectly with Fix It Sticks tools and our T-Way Driver (not included).
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
-
Vudoo Bolt Tool
$39.99 Select optionsAssemble and disassemble all Vudoo rimfire rifle bolts including the 90 degree 2-lug, 60 degree 3-lug, and Single Shot (bench rest) versions.
The Vudoo bolt assembly and disassembly tool was designed to make working with your Vudoo repeater and single shot bolts much easier. The design gives you just the leverage you need to compress the firing pin spring and align the cocking piece with the shroud detent. Can be used to re-cock the bolt, as well as assemble and disassemble all Vudoo rimfire rifles including the 90 degree 2-lug, 60 degree 3-lug, and Single Shot (bench rest) versions.
-
Fix It Sticks Modular T-Drive
$39.99Original price was: $39.99.$34.99Current price is: $34.99. Add to cartConfigurable T-Way Wrench can be used in traditional T-Shape, as well as strung together to allow for greater leverage. Small handle can also be used alone for precision control. Assembles together with knurled thumb screw.
The T-Way Wrench has magnetic holders on all three ends that accept any standard 1/4″ bit.
The T-Way Wrench is a home / shop / auto tool that allows you to build bikes, furniture, motorcycles, etc., etc., etc…
- High quality steel construction
- Speed Spinner for quick fastening
- Accepts any standard 1/4″ bit
-
FIX IT STICKS 15 INCH LB Limiter& 5/32 Extended Ball Head – for Ruger 10/22 Rifles
$54.99 Add to cartRuger 10/22 torque limiter with extended 5/32″ Ball-End Hex that is designed to reach the V-Block screws of Ruger 10/22. Also may be used to tighten the action screw.
When 15 Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Designed for Ruger 10/22 V-Block screws.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cycles
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
NOTE: T-Handle wrench is not included. Only the torque limiter and bit.
-
FIX IT STICKS Small Torque Limiter 18 INCH LBS FISTL18
$54.99 Read moreTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
Fix It Sticks EXTENDED ACTION BITS 5/32″
$11.99Original price was: $11.99.$9.59Current price is: $9.59. Add to cartCustom ball end hex bit designed to tighten hard to reach screws.
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 1/8″ for KIDD, etc.
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
-
Fix It Sticks KNIFE SHARPENER
$31.99 Read moreCustom Bit designed to turn your Fix It Sticks into a portable knife / broadhead sharpener.
Knife Sharpener
- Has both ceramic and carbide V-Style sharpeners
- Both are set at 22.5 degrees for a 45 degree inclusive angle
- Works with any standard 1/4” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
Fix It Sticks STEEL DENTAL PICK
$14.99 Add to cartSTEEL DENTAL PICK
(1)$10.00
Custom Dental Pick Bit.
- Works with any standard magnetic 1/4″ driver
- Has any number of uses: Carbon Scraper, Cotter Pin Puller, Patch Holder, etc.
- Is threaded to accept 8/32 rods.
- Black Isonite finish for increased corrosion resistance and strength
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.
-
FIX IT STICKS – 18 BIT BRACKET for Ratcheting T-Way Wrench with Locking Hex Drive: Version A
$12.49Original price was: $12.49.$9.99Current price is: $9.99. Add to cart -
Fix It Sticks THE WORKS FIS-WORKS
$425.00Original price was: $425.00.$389.00Current price is: $389.00. Add to cartGet our Torque Limiter, AR15 Field Maintenance, and Accessory Bits all in one Kit!
This kit contains numerous bits and accessories designed to help maintain your AR-15, tighten down your optics and rifle parts to the correct torque, and work on pistols and shotguns as well. Includes the following specialty parts / bits:
- T-Handle Wrench
- 65 Inch Lbs miniature torque limiter
- 45 Inch Lbs miniature torque limiter
- 25 Inch Lbs miniature torque limiter
- 15 Inch Lbs miniature torque limiter
- 1/2″ Socket and Bit Adapter
- Universal Choke Tube Wrench
- 1911 Bushing Tool
- Glock Front Sight Bit
- Mini Pry-Bar
- Bolt Carrier Group Scraper
- Metal Pin Punch
- Castle Nut Wrench
- Bronze Scraper
- Steel Pick
- Non-Marring Plastic Pin Punch
- Cleaning Brush Bit
- A2 Front Sight Adjustment Bit
- Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)
- Set of two bit adapters to allow for 8-32 threaded components
- 24 Chrome Plated 1/4″ Bits: [hex 2.5mm, 3mm, 4mm, 5mm, 0.50, 5/64, 3/32, 1/8, 7/64, 9/64, 5/32, 3/16, 1/4] T8, T10, T15, T20, T25, T27, T30, P1, P2, [slotted 3/16, 3/32]
- Magnetic Patch
- Soft Carrying Case
Soft carrying case has molded in bit holder that is designed to hold any bit / accessory with a standard 1/4″ Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component.
Be prepared at the Range or in the Field.
-
Fix It Sticks CLEANING Brush
$16.99Original price was: $16.99.$14.00Current price is: $14.00. Add to cartCustom cleaning brush bit.
- Works with any standard magnetic 1/4″ driver
- Accepts 8/32 threaded attachments for increased reach
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.