-
FIX IT STICKS Small Torque Limiter 55 INCH LBS FISTL55
$54.99 Add to cartTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
FIX IT STICKS Small Torque Limiter 53 INCH LBS FISTL53
$54.99 Add to cartTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
Fix It Sticks Duo Case
$55.00 Add to cartFix It Sticks Bit Extension that can be used with our T-Handle Wrenches for hard to reach screws and fasteners.
- 3.5 Inches in Length (not including male hex portion)
- Magnetic end accepts any standard 1/4″ Bit
-
LAPUA – .243 WIN MATCH RELOADING CASES – BOX OF 100
$154.99 Read more.243 Winchester brass – a true legend
The 243 Winchester is the legendary mild recoil caliber for todays small game hunting. The .243 Winchester case has all the world famous qualities of Lapua’ s unrivaled .308 Winchester brass -
Tab Gear Gen II Rifle Cover Extra long up to 52″
$179.99 Select optionsProtect your rifle from the elements. Whether you are carrying your rifle in the field or it’s sitting on the line with the bipod legs down. Dirt, mud, grass, dust, water, or sunlight cannot reach your rifle when a TAB Rifle cover is protecting it.
- Made from 1000 Denier Cordura Nylon
- Webbing is all 1″ Milspec
- Carry handle for convenient transport of rifle
- Scope and muzzle areas protected with closed cell foam padding
- Heavy duty Milspec D-rings for attaching rifle cover to pack
- Fastex buckles for easy access
- Rifle slings still available for normal carry
- Bipod legs can be fully enclosed for carry or left out for rapid deployment # Compact size when folded, fits into BDU cargo pocket
- Weighs less than 19 ounces
- Keeps rifle protected and cooler in the sun
All Rifle Covers are custom made orders. Please allow 14-21 days for the cover/covers to be made and shipped.
Models Available
GEN I:
Fits sporter style stocks, McMillan HTG(M40A1), Win. HBV, Remington PSS, FN SPR, etc. to an OAL of 46″ and scopes to 24″ in length.
GEN II:
Fits the Accuracy International, M25, McMillan A-Series, and TRG stocks to an OAL of 46″ and scopes to 24″ in length.GEN III:
Fits SR25 and AR10 with an overall length of 46″ and scopes up to 21″. -
-
Tab Gear 6 Pack Coyote Brown
$165.99 Read moreYour tools are designed for hard use, so why not have a bag that’s built to the same standards?
Durable materials, intentional design, and impeccable stitching come together to make the Six Pack the ultimate storage and transportation of your hard use tools whether ballistic or otherwise.
Perfect for a day at the range or keeping your gear sorted and stored for quick deployment in a vehicle or building.
FEATURES:
- #10 YKK® Zipper
- Water resistant 1000D Cordura®
- 550 Cord Zipper pulls
- Extra long zipper for “Bucket top” Zipper construction
- Velcro on side
- foam stiffener on the base
- front back gusseted pockets
- Made in Texas with US made materials!
- Lifetime Warranty
SPECS:
- 12 oz
- 6″ x 9 1/2″ x 8″
-
WCD Kydex Tikka Mag Carrier – Walsh Custom Defence
$59.99 Select optionsOur WCD Kydex SA Mag Holsters for Tikka magazines are custom made, one at a time and hand fitted before shipping. Each holster has an open bottom with a rubber stop, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA . A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available. Other colors available upon request.
Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster
NOTE: Standard Belt Clips accommodate belts up to 1/4” thick
NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws prior to setting desired tension to prevent screws from backing out during use
-
Insite Arms Barrel Tuner – For 0.995″ Heathen 3/4 x 24 , 18×1, 3/4×20 thread Black Nitride
$200.00 Add to cartBarrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.
The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.
-
Nightforce Standard Duty Base – REM 700 SA 1913 Mil-Std
$78.00 Select optionsNightforce Optics Standard Duty Aluminum Base for Remington 700 Short Action Rifle, 1913 Mil-Std Rail. Available in 0 or 20 MOA Elevation.
-
Nightforce X-Treme Duty™ Ultralite™ Rings 34mm – 6 Screw
$286.00 Select optionsNightforce X-Treme Duty Ultralite 6 Screw Rings are made to the same high standard as the 4 screw rings but provide a larger contact area on the scope. This is ideal for ensuring precision and repeatability in high recoil magnum calibers.
-
MasterPiece Arms ( MPA ) Bag Rider with Flush Cup
$29.00 Add to cartThis bag rider design, with the included flush cup, was an idea from Dave Preston, winner of the 2015 PRS Series. The bag rider attaches to your MPA BA Chassis, Comp Chassis or BA Lite Chassis that has a threaded three hole pattern in the bottom of the buttstock body. Its general purpose is to allow a consistent management of recoil when using a rear bag.
The purpose the flush cup, as conceived by Dave, is used when shooting certain positional stances when a sling is used to provide support for the rifle. Have the rear connection point on the bottom of the rifle pulls the rifle downward, as compared to side positioned flush cups which can trend the rifle laterally.
-
Impact Precision 787R Long Action RH Magnum BF, 45moa THIS ITEM IS CURRENTLY LIMITED AVAILABILITY – WE DO HAVE SOME STOCK ON HAND AND STANDING ORDER – PLEASE CALL OR EMAIL FOR AVAILABILITY
$2,780.00 Read moreThe wait is over! Our long actions have been in the field since last October getting tested and tweaked. We have placed actions in the hands of builders all over the country and have asked for feed back of pros and cons. We are ready to deliver.
This action has an integral rail and lug. Like our short action, the 787R has been machined with the extremely tight tolerances that we have been known and respected for. Indexing and headspace will be held to the same standards we have been known for, allowing for prefits.
Some of the features and capabilities include but are not limited to:
- Both BDL and DBM Compatible
- Will feed CIP length cartridges
- Magazine well cut for Wyatt extended mag box MBE-3 Long Action Box(3.825″)
- 20 MOA integral rail
- Available in Lapua and magnum bolt faces
- Mini M16 extractor
- 1-1/16 x 20 TPI Class 3 threads
- .750″ diameter bolt
- Interchangeable bolt knobs/handles
- 1.350″ Diameter body
- Integral Rail and lug
- Rem 700 Long Action foot print
- 90 degree, two lug design
- 2.33lbs
-
Atlas B&T BT30-C Coyote Brown Atlas Bipod Pouch
$80.90 Add to cartBT30-C: Coyote Brown Atlas Bipod Pouch
The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.
It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.
Made out of 1000 denier corder nylon.
-
MasterPiece Arms MATRIX Chassis COMPLETE Weight Tuning KIT – MPA
$174.99 Add to cartThe Complete Weight Tuning Kit for the full size BA/Comp Chassis & ESR Chassis includes the following:
- Steel Enhanced Bag Rider – 1.2 lbs
- Steel Monopod Weight – 1 lb
- Front Fore-end Weight – 1.2 lbs
- Rear Fore-end Weight – 1 lb
- 8 Front Fore-end clamps
- 8 Button Head Cap Screws for the clamps
- Fasteners for Attaching the Bag Rider and Monopod Weight
-
SPUHR A-0012 PICATINNY RAIL H10 L35 MM
$82.99 Read moreArticle no.: A-0012
Picatinny Rail for Spuhr interface. Includes screws. Height: 10 mm/0.39” Length: 35 mm/1.38” Weight: 14 g/0.5 oz -
SPUHR MOUNT HS40-23A SAKO AESTHETIC RINGS Ø34 H23/0.91″
$223.99 Read moreArticle no.: HS40-23A
Hunting rings for 34 mm tube on SAKO OptiLock bases/rails. Features two plain classic top covers. Height: 23 mm/0.91″ Weight: 79 gram/2.8 oz “Protected, EU Design Reg. No. 002438440/0001-0002” -
SPUHR SP-4003B Ø34 H38 0MIL PIC
$559.00 Read moreArticle no.: SP-4003B
For scopes with long erector housings such as U.S. Optics TPAL and Nightforce BEAST. Distance from ring to ring is 82 mm/3.228″. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 147 mm/5.79” Weight: 268 g/9.5 oz 10-degree wedge included -
Fix It Sticks BOTTLE OPENER
$8.99 Add to cartBottle Opener Bit
- Happy Hour – Fix It Sticks Style
- Machined from steel barstock
- Works with any standard ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
-
Fix It Sticks AIMPOINT BIT
$14.99 Add to cartCustom bit designed to aid in the adjustment of Aimpoint Sights.
Aimpoint Adjustment Bit
- Two prong design specifically works with the windage and elevation adjustment knobs.
- Semi-circular wings designed to fit “coin-slot” style adjustment knobs / battery covers.
- Molded synthetic polymer won’t mar or scratch the finish of the sight.
- Metal ¼” Hex Base allows it to work with any ¼” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart