Categories

Showing 442–462 of 803 results

Filter
  • Out of stock

    ATLAS BT43: Leveraged Rail

     $134.90 Read more

    The BT43 Leveraged Rail is a BT20-B and an American Defense ADM-170-S lever as a complete assembly. It provides the means to quickly attach/detach any rail attached accessory to include our Atlas Bipods and Precision Rail Monopods.

    The BT20-B is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    • Length: 1.6″
    • Bottom of rail to bottom of BT20-B rail: 0.58″
    • Weight: 2.5 ounces
  • Out of stock

    ATLAS BT80: M-LOK® Flush Cup Rail

     $60.59 Read more

    The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.

    Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.

    • Length: 2.875″
    • Center-to-center: 1.575″
    • Width: 0.835″
    • Weight: 1.038 oz

  • FIX IT STICKS Small Torque Limiter 4 INCH LBS FISTL4

     $54.99 Add to cart

    Torque Limiter prevents over-tightening of fasteners

    When Inch Lbs is reached:

    • Audible “Click” is heard.
    • Limiter “spins” preventing further torque from being applied.

    Features

    • Accepts any standard 1/4″ bit
    • Fits into any standard 1/4″ driver
    • +/- 6% Accuracy
    • Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
  • Out of stock

    FALKOR LW7 SHORT ACTION , RH Magnum BF

     $1,999.00 Read more

    DESIGNED TO BE LIGHTWEIGHT

    Designed on the lighter side for the avid hunter, or custom rifle enthusiast, the LW7 will be sure to please with it’s sleek design and smooth finish.

    SPECIFICATIONS:

    • Billet short action receiver Remington 700TM footprint
    • Nitride finish
    • Wire EDM cut lug ways
    • M16 style extractor
    • Trigger mount 2 pin (.125)
    • Integrated recoil lug
    • Receiver machined from Prehardened 416ss
    • Vertical side bolt release, that is much stronger than the standard horizontal
    • Weight including bolt assembly: 19.7oz
    • 1 1/16″×16 TPI barrel thread tenon
    • Recoil lug thickness .260
    • Recoil lug protrusion from action .230
    • Feed Type: Push
    • Ejection Port Length: 3.100”
    • Over pressure safety: Directional Raceway Gas Port (9 O’clock)
    • Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank
    • Firing Pin spring Force 20lbs
    • One piece bolt machined from 4340 chrome moly
    • Fluted bolt to allow debris to be removed from lug ways
    • Changeable bolt knobs
    • Plunger ejector
    • Recessed bolt nose
    • 2 lug 90 degree throw

    *PICATINNY RAIL SECTIONS SOLD SEPARATELY*

     

    DON’T PROMISE…PROVE.  Our mission?  To build world-class Actions that are designed, engineered, and manufactured to the most stringent aerospace standards in the world…period. To achieve that objective, every part is scrutinized for tolerance, and meticulously inspected to prove functionality. To achieve and maintain this type of quality, we manufacture our Actions “in-house” right here in Montana, using American made materials.  Promising is one thing, proving is another.

    Falkor Defense Actions are manufactured to AS9100 Aerospace standards to Falkor’s engineered drawings. AS9100 is a widely adopted and standardized quality management system for the aerospace industry. This means procedures, processes, and work instructions (including inspection) are developed and audited specifically for our Actions. Our inspection criteria includes Coordinate Measuring Machine (CMM) checks, and in-process inspection plans through all operations.

  • Out of stock

    FALKOR LW7 SHORT ACTION , RH STD (308) BF

     $1,899.00 Read more

    DESIGNED TO BE LIGHTWEIGHT

    Designed on the lighter side for the avid hunter, or custom rifle enthusiast, the LW7 will be sure to please with it’s sleek design and smooth finish.
    SPECIFICATIONS:

    • Billet short action receiver Remington 700TM footprint
    • Nitride finish
    • Wire EDM cut lug ways
    • M16 style extractor
    • Trigger mount 2 pin (.125)
    • Integrated recoil lug
    • Receiver machined from Prehardened 416ss
    • Vertical side bolt release, that is much stronger than the standard horizontal
    • Weight including bolt assembly: 19.7oz
    • 1 1/16″×16 TPI barrel thread tenon
    • Recoil lug thickness .260
    • Recoil lug protrusion from action .230
    • Feed Type: Push
    • Ejection Port Length: 3.100”
    • Over pressure safety: Directional Raceway Gas Port (9 O’clock)
    • Firing Pin Material: prehardened 4140 Chrome Moly on a 7075 Aluminum Shank
    • Firing Pin spring Force 20lbs
    • One piece bolt machined from 4340 chrome moly
    • Fluted bolt to allow debris to be removed from lug ways
    • Changeable bolt knobs
    • Plunger ejector
    • Recessed bolt nose
    • 2 lug 90 degree throw

    *PICATINNY RAIL SECTIONS SOLD SEPARATELY*

     

    DON’T PROMISE…PROVE.  Our mission?  To build world-class Actions that are designed, engineered, and manufactured to the most stringent aerospace standards in the world…period. To achieve that objective, every part is scrutinized for tolerance, and meticulously inspected to prove functionality. To achieve and maintain this type of quality, we manufacture our Actions “in-house” right here in Montana, using American made materials.  Promising is one thing, proving is another.

    Falkor Defense Actions are manufactured to AS9100 Aerospace standards to Falkor’s engineered drawings. AS9100 is a widely adopted and standardized quality management system for the aerospace industry. This means procedures, processes, and work instructions (including inspection) are developed and audited specifically for our Actions. Our inspection criteria includes Coordinate Measuring Machine (CMM) checks, and in-process inspection plans through all operations.

  • FIX IT STICKS Small Torque Limiter 35 INCH LBS FISTL35

     $54.99 Add to cart

    Torque Limiter prevents over-tightening of fasteners

    When Inch Lbs is reached:

    • Audible “Click” is heard.
    • Limiter “spins” preventing further torque from being applied.

    Features

    • Accepts any standard 1/4″ bit
    • Fits into any standard 1/4″ driver
    • +/- 6% Accuracy
    • Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.

  • Fix It Sticks LONG RANGE COMPETITION TOOLKIT with Individual Tourque Limiters

     $454.99 Add to cart

    Precision is the name of the game in long-range shooting, and Fix It Sticks’ Long-Range Competition Toolkit will help you keep your high-performance rifle in peak running condition while in the field.

    Use this comprehensive assortment of tools in even the most austere conditions. With it, you can tighten down your optics, action and accessories to the correct torque to ensure precise round placement, shot after shot.

    The Long-Range Competition Toolkit includes:

    • Ratchet T-Handle w/Locking Hex Drive
    • 15, 25, 45, 65 in-lbs torque limiters or All-In-One Torque Driver
    • 1/2″ Socket/Adapter
    • Mini Pry Bar
    • Pin Punch Set (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 1/4″)
    • Bronze Scraper
    • Steel Pick
    • Cleaning Brush Bit
    • Set of two 8-32 adapters
    • Machined Aluminum Bubble Level Set, which includes: magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials
    • Stainless Steel Rod Set (6) with .223/6.5/.30 Brass Adapters & Ball Bearing Drive (locks into T-handle, assembles to 44″)
    • 3/16″ Extended Action Bit
    • 5/32″ Extended Action Bit
    • 24 Chrome Plated Bits: T8, T10, T15, T20, T25, T27, T30, P1, P2, [Hex 0.050″, 5/64″, 3/32″, 1/8″, 7/64″, 9/64″, 5/32″, 3/16″, 1/4″, 2.5mm, 3mm, 4mm, 5mm] [Slotted 3/16″, 3/32″]
    • Magnetic Velcro Patch
    • Micro Fiber Lens Cloth
    • Torque Value Reference/Conversion Card
    • Soft Carrying Case with molded, low-profile bit holders designed to hold any bit / accessory with a standard 1/4″ Base
  • Out of stock

    FIX IT STICKS COMPACT PISTOL TOOLKIT FOR SIG SAUER®

     $239.00 Read more

    Whether you carry daily or you’re simply a Glock® enthusiast, you’ll want the Field Toolkit for Glock at the ready. This toolkit has everything you need to maintain or upgrade a Glock pistol, including specialty tools designed to work with Glock firearms such as our Front Sight Tool, Base Plate Removal Tool, and more.

    Includes the following specialty parts / bits:

    • Ratchet T-Handle w/Locking Hex Drive
    • Mini All-In-One Torque Driver
    • 3/32″ Pin Punch
    • 1/8″ Pin Punch
    • Steel Pick
    • Cleaning Brush Bit
    • Channel Liner Installation and Removal Tools
    • Sight Tool
    • Magazine Base Plate Removal Tool
    • Battery Cap Tool
    • Two brass rods
    • Set of two 8-32 adapters
    • 10 Electroless Nickel Plated Bits: T8, T10, T15, P1, H2.5mm, H.050”, H1/16″, H5/64”, 3/32”Extended Bit (for adjusting hard to reach screws on optics), SL6mm.
    • Compact Carrying Case with molded bit holders designed to hold any 1/4″ bit

  • FIX IT STICKS FIELD TOOLKIT FOR GLOCK®

     $239.00 Add to cart

    Whether you carry daily or you’re simply a Glock® enthusiast, you’ll want the Field Toolkit for Glock at the ready. This toolkit has everything you need to maintain or upgrade a Glock pistol, including specialty tools designed to work with Glock firearms such as our Front Sight Tool, Base Plate Removal Tool, and more.

    Includes the following specialty parts / bits:

    • Ratchet T-Handle w/Locking Hex Drive
    • Mini All-In-One Torque Driver
    • 3/32″ Pin Punch
    • 1/8″ Pin Punch
    • Steel Pick
    • Cleaning Brush Bit
    • Channel Liner Installation and Removal Tools
    • Sight Tool
    • Magazine Base Plate Removal Tool
    • Battery Cap Tool
    • Two brass rods
    • Set of two 8-32 adapters
    • 10 Electroless Nickel Plated Bits: T8, T10, T15, P1, H2.5mm, H.050”, H1/16″, H5/64”, 3/32”Extended Bit (for adjusting hard to reach screws on optics), SL6mm.
    • Compact Carrying Case with molded bit holders designed to hold any 1/4″ bit

  • FIX IT STICKS Small Torque Limiter 40 INCH LBS FISTL40

     $54.99 Add to cart

    Torque Limiter prevents over-tightening of fasteners

    When Inch Lbs is reached:

    • Audible “Click” is heard.
    • Limiter “spins” preventing further torque from being applied.

    Features

    • Accepts any standard 1/4″ bit
    • Fits into any standard 1/4″ driver
    • +/- 6% Accuracy
    • Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.

  • MasterPiece Arms ( MPA ) Magwell Plate: Teeth -for Matrix Pro

     $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Hook -for Matrix Pro

     $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Complete Kit for Matrix Pro ( Blocker, Hook & Teeth )

     $219.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro

     $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • Gray Ops CNC Precision Scope Mount 36mm dia. / 1.26″h

     $539.00 Add to cart

    Designed for shooters, by shooters.  This mount encompasses everything needed for ultimate consistency and reliability.  Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.

    FEATURES:

    • 7075 Aluminum
    • Integrated recoil lug
    • Steel thread reinforced cross bolt holes
    • Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
    • Type III Hard coat Anodize
    • Multiple accessory locations with unique V-Groove self-aligning design
    • All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed

    Weight: 7.9 Oz

    Outside Length: 4.85”

    Inside Length: 2.55”

    Finish: Flat Black

    T25 Plus Torx Bit included

    Accessories sold separately

  • Sale!

    OBi LINK SYSTEM – Round Plate

     Original price was: $55.99.Current price is: $41.99. Add to cart

    The OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.

  • Sale!

    OBi LINK SYSTEM – U-Plate ARCA

     Original price was: $18.99.Current price is: $14.24. Add to cart

    The U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.

    *U-Plate Arca*
    -Fits Clamp Lock-
    -Fits Slide Lock-
    -Fits Camera Lock-
    -Fits Grip On-

     

  • Sale!

    OBi LINK SYSTEM — GRIP ON

     Original price was: $119.99.Current price is: $89.99. Add to cart

    The OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.

  • Fix It Sticks CARRYING CASE – XL

     $55.00 Add to cart

    Description

    Version A (All-Purpose Case):  Soft carrying case has four molded bit holders that attach to the middle divider. Each bit holder can fit up to twenty four components and bits (ninety-six total).  Sewn loops hold a T-Way Wrench, as well as additional components.  Magnetic Patch (not included) can attach to the Velcro square on the inside of the case.

    Version B (3Gun / Long Range Case):  Soft carrying case has two molded bit holders that attach to the middle divider. Each bit holder can fit up to twenty four components and bits (forty eight total).  Sewn loops hold T-Way Wrench, as well as additional components.  Middle panel holds Fix It Sticks Bore Obstruction / Cleaning Rods, Caliber Adapters, Obstruction Tips, and Ball Bearing Handle.  Magnetic Patch (not included) can attach to the Velcro square on the inside of the case.

     

  • Sale! Out of stock

    Insite Arms Defiance Ruckus Left Hand 6mm Creedmoor

     Original price was: $6,695.00.Current price is: $6,299.00. Read more

    6mm Creedmoor

    Defiance Ruckus Nitrided - LEFT HAND
Krieger 1/7.5 MTU 27" Spin Polished
Triggertech Diamond
MPA Matrix Chassis Black
10/12rnd AICS Mag
Heathen Brake 4 Port G2
3/8moa Guarantee
Facebook
Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!