Showing 1–21 of 28 results

Filter
  • BT46-LW17 PSR Atlas Bipod: Standard height with ADM 170-S Lever

    $449.00 Read more
    • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Fore and Aft pivot limiting Bosses*
    • Non-Rotating Legs: outer leg does not rotate around inner leg*
    • Strengthened Leg Boss*
    • Inner Leg constructed from T7075*
    • Weight 13.61 ounces.
    • Footprint spread 8″–11″
    • Available in black only
    • Made in America
  • IMG_0553_grande

    Short Action Precision ( SAP ) Ckye-Pod Quick Adjust Lever

    $34.99 Add to cart

    WORKS WITH ALL Gen I and Gen II Ckye-Pods

    Are you tired of using an Allen wrench every time you want to adjust the tension on your tilt on your Ckye-Pod? We have the solution!

    Replace that Allen bolt on your Ckye-Pod with this rugged handle. A bipod lever makes for fast tension adjustments, and allows you to also lock it down in any position. This Short Action Precision exclusive accessory is a must have for any Ckye-Pod owner!

    • Installs easily in under 2 minutes with just an Allen wrench
    • Works will all models and generations of Ckye-Pods
    • Compatible with MDT Ckye-Pods
    • 30mm (~1.30″) zinc die-cast handle
    • Stainless steel components
    • Black powder coat finish
  • bt74-atlas-raider-cleat-feet

    BT74: Atlas Raider Spike Feet

    $94.99 Add to cart

    The BT37 Atlas Spike Feet are easily installed with the press of a stainless steel plunger to any V8, PSR or CAL model Atlas Bipod. They deliver a singularly aggressive foot to support the bipod. The Spike portion is approximately 1.45” long with the largest OD of approximately 1”. Sold as a pair. Available in raw stainless with black insert only.

    Weight: 2.7 ounces

    Product will work on V8, PSR and CAL models only.

  • 5-H Atlas Bipod BT35-LW17

    $618.00 Read more
    • Mounts directly to any 1913 style Picatinny rail via included CUSTOM ADM Lever.
    • Height Range approximately 5.5 – 10.5″
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • 5-H Pan and Cant can be locked out at top dead center
    • PAN and CANT Tension Wheel has Detent adjustability and Cam-Lock
    • PATENTED multiple deployable leg positions of 0, 45, 90, 135 and 180
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight 27.2 ounces.
    • Footprint spread 14.5″– 19.5″
    • Available in black only
    • Made in America
  • BT10-LW17 V8 Atlas Bipod

    $369.99 Read more
    • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
    • Height Range approximately 4.75 – 9.0″.
    • 15 degrees +/- of preloaded Pan.
    • 15 degrees +/- of preloaded Cant.
    • Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
    • Weight 12.7 ounces.
    • Footprint spread 8″– 11″
    • Available in black only
    • Made in America
  • BT65-LW17

    $404.93 Read more

    The BT65-LW17 CAL (Cant And Loc) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It was developed for shooters that do not desire the Panning feature of the V8 or PSR series of Atlas bipods. The BT65-LW17 has the larger Inner legs, patented 5 leg positions that do not rotate found on the Atlas PSR series, quick change feet and “hold what you move technology.” We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc.” Available in black only.

  • Atlas BT19 Accuracy International Spigot

    $109.99 Read more

    The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism. The BT19 is constructed from 6061T6 Aluminum with a type II hard coat anodize mated with an alloy steel Spigot that is finished with a Manganese Phosphate.

    The evolution of long range shooting and shooter’s demand drove subtle changes to the BT19. The latest modification stops the 3 to 9 rotation. Available in black only.

    Weight: 4.7 ounces

     

  • bt49-205-adjustable-rail

    ATLAS BT28: AFAR Rail Kit

    $47.10 Add to cart

    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picatinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.

    The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.

    The 1913 Picatinny Rail is 2.05″ long and has a center to center spacing of 1.6″ with a 1.00″ radius back.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two 3/8″ fasteners and two 1/2″ fasteners. Available in black only.

    • Length: 2.05″
    • Weight: 0.89 ounces
  • BT46-NC PSR Atlas Bipod: Standard height

    BT46-NC PSR Atlas Bipod: Standard height

    $339.99 Add to cart

    BT46-NC PSR Atlas Bipod: Standard height No Clamp

    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.

    It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.

    The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).

    • Height Range: 5 – 9.4″ (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5″ diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 11.42 ounces approx.
    • Footprint: 8–11″
  • CARBON-FIBRE-BIPOD-AT-BO1
  • bt73-m-lok-rail

    ATLAS BT73: M-LOK® Rail

    $40.39 Add to cart

    The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas BipodsAccu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.

    Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.

    • Length: 1.575″
    • Width: 0.835″
    • Weight: 0.59 oz

     

     

    For a direct M-LOK® to “NC” (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter

  • ATLAS BT15: 3.35″ 1913 Picatinny Rail

    $26.89 Read more

    The BT15 – 3.35″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78″ and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).

    A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 0.92 ounces

  • bt66

    Atlas 5-H & Super CAL BAS Ski Feet BT66

    $122.99 Add to cart

    The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5″ 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.

    Weight: 6.16 ounces

    Product will work on 5-H and Super CAL models only.

  • ATLAS BT22: Leg Extensions

    ATLAS BT22: Leg Extensions

    $69.99 Add to cart

    BT22: Atlas Leg Extensions

    The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369

    Weight: 1.8 ounces

    Product will work on V8, PSR and CAL models only.

  • ATLAS BT23 Ski Feet

    ATLAS BT23 Ski Feet

    $69.99 Add to cart

    BT23: Atlas Ski Feet

    The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only. NSN 1005-01-640-8881

    Weight: 1.5 ounces

    Product will work on V8, PSR and CAL models only.

  • Atlas B&T BT30-C Coyote Brown Atlas Bipod Pouch

    $49.99 Read more

    BT30-C: Coyote Brown Atlas Bipod Pouch

    The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.

    It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.

    Made out of 1000 denier corder nylon.

  • Atlas BT72-LW17 Super Cal Bi-Pod

    Atlas BT72-LW17 Super Cal Bi-Pod

    $559.00 Add to cart

    BT72-LW17 Super CAL Atlas Bipod

    The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology™.”

    It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.

    • Height Range: 5.875-11.125” (7.66” at 90°) 
    • Cant: 45 degrees
    • Position Button: 0.5″ diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 23.16 ounces
    • Footprint: 14.75-19.37″
  • bt20b-aais-bottom-rail

    ATLAS BT20-B: Atlas Accuracy International Spigot Bottom Rail

    $33.49 Add to cart

    The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod.

    It is the same rail found on our BT21 TRG BracketBT43 Leveraged Rail and BT20-B/ARCALOCK Clamp. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept any rail mounted bipod.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.

    • Length: 1.60″
    • Weight: 0.57 ounces
  • bt15-335-1913-rail

    ATLAS BT17: 4″ 1913 Picatinny Rail

    $39.99 Add to cart

    The BT17 – 4″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).

    A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 1.20 ounces

  • bt49-205-adjustable-rail

    ATLAS BT49: 2.05″ 1913 Adjustable Picatinny Rail

    $33.59 Add to cart

    The BT49 – 2.05″ 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 – 1.6″ with a 1.00″ radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks.

    The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.

    • Length: 2.05″
    • Weight: 0.4 ounces
  • bt30-black

    Atlas B&T BT30-R: Black Atlas Bipod Pouch

    $49.99 Add to cart

    BT30-B: Black Atlas Bipod Pouch

    The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.

    It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.

    Made out of 1000 denier corder nylon.

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!