Filter
  • Vudoo Gun Works Polymer Magazine 10 Round - V22 Rimfire Action Out of stock

    Vudoo Gun Works Polymer Magazine 10 Round – V22 Rimfire Action

     $66.99 Read more

    V-2210 10 round AICS format magazine for both 22lr and 17HM2.

  • Vudoo Gun Works Aluminum Magazine 5,10&15 round - V22 Rimfire Action Out of stock

    Vudoo Gun Works Aluminum Magazine 5,10&15 round – V22 Rimfire Action

     $119.99 – $149.00 Select options This product has multiple variants. The options may be chosen on the product page

    V-22 5, 10, 12, and 15 round AICS format magazines for both 22lr and 17HM2. Machined from billet aluminum and anodized for a durable finish.

  • Universal 700 Platform Rimfire Magazine Out of stock

    L3I Universal 700 platform Rimfire Magazine – Vudoo Gun Works

     $99.00 Read more

    Introducing our universal rimfire magazine!  It is the culmination of 2 years of research and development into rimfire magazines.  This magazine incorporates all the features of our B14r magazine but is optimized to function in the other Rem 700 based 22lr trainers.  It provides the extra capacity (14) that competition shooters want and the adjustability needed to tune feeding in a variety of chassis/stock configurations.

  • Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) SHORT Action HUNTER Out of stock

    Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) SHORT Action HUNTER

     $369.00 Read more

    The Hunter Detachable Box Magazine (DBM) bottom metal is designed for shooters that are looking for a flush mounted bottom metal that will accept AICS pattern magazines. The bottom metal is machined from a single piece of billet 6061 and features a patented cantilever spring mag release system that will not open under heavy recoil. The magazine release is also adjustable, sleek and all but impossible to actuate accidentally.

    The Hunter DBM is made to fit into an M5 inlet. It is available for Remington 700 actions, and all Remington 700 clones. Comes with pillars and action screws.

    Short Action Weight: 3 Ounces / Long Action Version Under Development

  • WCD Kydex Vudoo V22 Mag Carrier - Walsh Custom Defence Carbon Fiber Color Out of stock

    WCD Kydex Vudoo V22 Mag Carrier – Walsh Custom Defence Carbon Fiber Color

     $59.99 Read more

    Our WCD Vudoo/B14 Kydex Mag Holsters are custom made and are designed to be used with Vudoo and Bergara B14 22 LR magazines. Each holster has an open bottom with a rubber stop which keeps the ammunition protected inside of the holster, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA. A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available. Other colors available upon request.

    Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster

    NOTE: Standard Belt Clips accommodate belts up to 1/4” thick

    NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws once desired tension is set to prevent screws from backing out during use

  • Sale! Magwell Plate "HOOK" for BA Comp, ESR, Matrix, Matrix Pro/II, Vanquish and Hybrid Out of stock

    Magwell Plate “HOOK” for BA Comp, ESR, Matrix, Matrix Pro/II, Vanquish and Hybrid

     Original price was: $83.99.Current price is: $79.00. Read more

    THIS PRODUCT IS FOR THE “HOOK” PLATE ONLY – NOT THE WHOLE KIT

     

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro Out of stock

    MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro

     $83.99 Read more

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • WCD Kydex Tikka Mag Carrier - Walsh Custom Defence

    WCD Kydex Tikka Mag Carrier – Walsh Custom Defence

     $59.99 Select options This product has multiple variants. The options may be chosen on the product page

    Our WCD Kydex SA Mag Holsters for Tikka magazines are custom made, one at a time and hand fitted before shipping. Each holster has an open bottom with a rubber stop, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA . A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available. Other colors available upon request.

    Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster

    NOTE: Standard Belt Clips accommodate belts up to 1/4” thick

    NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws prior to setting desired tension to prevent screws from backing out during use

  • MasterPiece Arms ( MPA ) Cheek Riser Locator Collars Out of stock

    MasterPiece Arms ( MPA ) Cheek Riser Locator Collars

     $26.99 Read more

    Attach these shaft collar to your guide rods on any MPA Chassis cheek riser assy to provide a quick, easy and consistent method of relocating your cheek riser to your predetermined position. These work with chassis with and without a thumb wheel system.

    For those with a thumb wheel design, simply remove the thumb wheel from the cheek riser assy, install these shaft collars, set the appropriate height position and your repeatibility to that position will be the same everytime you remove your cheek riser and re-install it.

    Takes about 5 minutes to install. Price includes shipping.

  • MasterPiece Arms ( MPA ) Magwell Plate: Hook -for Matrix Pro

    MasterPiece Arms ( MPA ) Magwell Plate: Hook -for Matrix Pro

     $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) LONG (CIP length) Action Out of stock

    Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) LONG (CIP length) Action

     $389.00 Read more

    Hawkins Precision M5 Detachable Box Magazine Rifle Bottom Metal is designed specifically for precision shooting. CNC-machined from a single piece of billet aluminum, this precision rifle bottom metal incorporates a barricade stop in front of the magazine well, and has a drafted magazine port. Our M5 DBM also includes a patented cantilever spring release that will not open under recoil. The M5 DBM is also  available with a forward Picatinny rail attachment to attach a bipod, barricade stop, or tripod providing solution to create a stable shooting position in any environment.

    • Fits Remington 700 and Remington Clone actions.
    • Fits M5 inlets.
    • Uses AICS magazines.
    • Short-action version will work with AW magazines if your action is cut accordingly.
    • Comes standard with action screws and bedding pillars.
    • Available in Short Action, Defiance XM, Long Action CIP Length 338 Lapua
    • If you’re looking for XM Lone Peak Bottom Metal, please contact Lone Peak Arms directly.
  • MasterPiece Arms ( MPA ) Magwell Plate: Complete Kit for Matrix Pro ( Blocker, Hook & Teeth ) Out of stock

    MasterPiece Arms ( MPA ) Magwell Plate: Complete Kit for Matrix Pro ( Blocker, Hook & Teeth )

     $219.99 Read more

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

  • Sale! MasterPiece Arms ( MPA ) RAT Magnetospeed Adaptor

    MasterPiece Arms ( MPA ) RAT Magnetospeed Adaptor

     Original price was: $110.00.Current price is: $79.99. Add to cart

    The RAT Magnetospeed Adaptor is used on our RAT System (Rapid Adjustment Technology). It is designed to provide an attachment method of a Magnetospeed Ver. 2 & 3 to the RAT Dovetail Plate (Spigot Mount) on the MPA BA Chassis.

    This will include the RAT Base, Magnetospeed Adaptor Block,  and attachment rod.  **System requires the use of a Spigot Mount (available for purchase HERE ) and a RAT Dovetail adaptor plate for “older version Spigot Mount” (available for purchase HERE) to attach to the chassis **

    There is a version for a rifle (11.5″ rod) with a suppressor and without a suppressor. The version with a suppressor will include an extended main rod (17.5″) and a set of spacers to be used for clearance between the main rod and the suppressor body.

    A 3rd version will be used for the Matrix Pro Chassis. This has the short magnetospeed rod (6.5″) due to the longer fore-end. This version is designed to be used with a muzzle brake. If you are running a suppressor with your Matrix or Matrix Pro, please select this option on the drop down menu. The system will come with either the 6.5″ rod or the 11.5″ rod depending on the application.

    This version will work with Magnetospeed Versions 2 & 3. It will not work with Version 1 or the Sporter.

Facebook
Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!