-
Short Action Precision ( SAP ) Two Round Holder
$16.99 Select options This product has multiple variants. The options may be chosen on the product pageHold an extra two rounds right where you need them in a pinch with the SAP Two Rounder! This two round holder attaches with Velcro to side of rifle near ejection port. This little guy has saved my bacon on that one last shot more times than I can remember!
Don’t know which Two Rounder for your round?
Measure the case and compare to the specs here.For all .308 based cartridges to .300 Win Mag
Other cartridges just measure case OD
Based on a Case OD of .4709″ / 11.96mm
Will take cartridges .450″ / 11.4mm up to .550″ / 14mm
NEW Magnum Caliber Size Here
NEW .223 Two Round Holder HereCheck out what some people are saying about the Two Rounder!
-
Tab Gear BB: Bullet Binder
$96.88 – $96.99 Select options This product has multiple variants. The options may be chosen on the product pageHave you been looking for a way to carry your rounds so the bullets don’t touch each other? If you go to the trouble of using a bullet pointing die to uniform each bullet tip, you don’t want them banging against each other.
The TAB GEAR Bullet Binder has 40 separate elastic shell loops to keep the rounds from touching each other. The outside of the Bullet Binder is made of two layers of Cordura with a thick piece of plastic vinyl sandwiched between them to provide protection to the contents.
A separate Velcro label is available as well in colors black, OD, and coyote tan.
These are sized for typical short action calibers based on the .308 case size. Other caliber sizes will be produced in the future.
Features:
1/8” bungee closure system that is user replaceable and silent opening and closing.
1” Loop Velcro strip on the spine to attach caliber identification labels.
Thick vinyl sheeting to provide rigidity and strength.
1000 D Cordura
Shell loops are staggered to prevent rounds from touching and for as compact a package as possible.
Clear window to allow instant viewing of dope cards and other information when opened.
Forty round capacity. -
Sale! Out of stock
OBi LINK SYSTEM — CLAMP LOCK
Original price was: $69.99.$52.49Current price is: $52.49. Read moreThe OBi Link System Clamp Lock mounts to your backpack or belt strap so that you can connect any round or square posts. It can bolt to any webbing from 1/2 inch to 1.5 inches.
NOTE: You will need at least one Clamp Lock or Slide Lock AND one Round Post M-Lok, Quick Detach Post, or Anywhere Post for a complete system.
-
Sale! Out of stock
OBi LINK SYSTEM — QUICK DETACH POST
Original price was: $56.99.$42.74Current price is: $42.74. Read moreThe OBi Link System Quick Detach Post or QDP is the most straightforward and toolless post. The QDP attaches to any flush cup, whether it is on your rifle, camera cage, or any other piece of kit you may want to connect to your backpack.
-
WCD Ammo Carrier – Walsh Custom Defence 120 Round
$149.00 Select options This product has multiple variants. The options may be chosen on the product pageIntroducing the Walsh Custom Defense Ammo Carrier !!! Gone are the days of toting around bulky bullet boxes and digging through your pack for ammo. Our low profile and compact ammo carrier securely holds up to 120 rounds of Short Action ammunition and can easily fit in a pack. Inside, 4 rigid panels house 120 elastic bullet loops in rows of 10. Located directly below each row of bullet loops, a pocket is provided to protect the tips of your bullets from being damaged. Each carrier is fitted with a nylon carry strap along the top edge, along with Velcro closure. A morale patch loop area is provided on the lower front panel.
Each carrier is handcrafted in the USA using only the highest quality Milspec materials. Genuine Cordura 1000D fabric is used for the body of the carrier to ensure durabilty, while heavy duty nylon thread is used to ensure stitch strength. Satisfaction Guaranteed !!!
Closed size: 7.5”x 11” x 2.75” fully loaded
Weight empty: 1 lb. 9 oz.
-
Short Action Precision ( SAP ) Two Round .223 Holder
$16.99 Select options This product has multiple variants. The options may be chosen on the product pageHold an extra two .223 / 5.56 rounds right where you need them in a pinch with the SAP .223 Two Rounder! This two round holder attaches with Velcro to side of rifle near ejection port. This little guy has saved my bacon on that one last shot more times than I can remember! This is great for hunting and trainer rifles!
Don’t know which Two Rounder for your round?
Measure the case and compare to the specs here.Designed for .223 / 5.56 cartridges
Other cartridges just measure case OD
Based on a Case OD of .376″ / 9.55mm
Will take cartridges .3.40″ / 8.63mm up to .440″ / 11.18 mmCheck out what some people are saying about the Two Rounder!
-
Short Action Precision ( SAP ) Two Round MAGNUM Holder
$16.99 Select options This product has multiple variants. The options may be chosen on the product pageNEW Magnum cartridge size! Hold an extra two rounds right where you need them in a pinch with the SAP Magnum Two Rounder! This two round holder attaches with Velcro to side of rifle near ejection port. This little guy has saved my bacon on that one last shot more times than I can remember!
Don’t know which Two Rounder for your round?
Measure the case and compare to the specs here.
Important! You must clean the stock with a good quality rubbing alcohol (91% preferred) and let that dry completely to prepare the surface for proper adhesion of the supplied industrial strength Velcro piece!
- Fits 6.5 SAUM, 7 SAUM, .338 Lapua, and most Mag/Ultramag cartridges
- Other cartridges just measure case OD
- Will take cartridges .550″ / 14mm up to .80″ / 20mm
- Based on a Case OD of .587″ / 14.91mm
-
Armageddon Gear 10-round Adjustable AICS/AW Mag Pouch
$64.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Armageddon Gear 10-Round Adjustable AICS/AW Mag Pouch securely holds your rifle magazine on either PALS webbing or any belt up to 2 inches in width.
-
Short Action Precision ( SAP ) .22 Magazine Holder OD Green
$16.99 Read moreHold an extra .22 magazine like our famous two rounder right where you need them in a pinch with the SAP .22 Magazine Holder! This little mag holder attaches with Velcro to side of rifle near ejection port. Now you can have easy and quick mag access for your .22 bolt rifles!
- Sized for CZ455 10 round magazines
- Perfect for trainers
-
Sale!
OBi LINK SYSTEM — ROUND POST M-LOK
Original price was: $55.99.$41.99Current price is: $41.99. Add to cartThe OBi Link System Round Post M-lok or RPM mounts to the M-lok slot on the forend of your rifle stock. It can also mount to any other piece of gear with an M-lok slot or similar hole spacing.
Once it is attached to your rifle or other equipment, it can connect to the Clamp Lock, Slide Lock, or Grip On Round.
-
Sale!
OBi LINK SYSTEM — ANYWHERE POST
Original price was: $54.99.$41.24Current price is: $41.24. Add to cartThe OBi Link System Anywhere Post can be attached to gear by either a bolt or a threaded stud. Once the Anywhere Post is attached, you can connect it to the Clamp Lock, Slide Lock, or Camera Lock.
-
Sale!
OBi LINK SYSTEM — SLIDE LOCK
Original price was: $69.99.$52.49Current price is: $52.49. Add to cartThe OBi Link System Slide Lock attaches to a 1-inch webbing on a backpack strap or belt by weaving the webbing through its back. This Slide Lock can be used on straps with or without MOLLE.
NOTE: You will need at least one Clamp Lock or Slide Lock AND one Round Post M-Lok, Quick Detach Post, or Anywhere Post for a complete system.
-
Silent Ammo Carrier TAB Gear
$69.99 Select options This product has multiple variants. The options may be chosen on the product pageThe TAB GEAR SAC addresses the issues that you have to deal with when carrying a lot of ammo.
The SAC will hold 100 rounds of .308 ammo. It also has ammo loops on the outside that will hold 10 rounds for quick access. There is a divider inside that allows the shooter to easily segregate live rounds from fired brass.
It is very easy to store fired brass, no more trying to insert them back into shell loops or throwing them into a pack pouch to dig out later. Simply throw the empty brass into the inside compartment of the SAC and they are ready to dump out later.1000 Denier Cordura available in Coyote Brown, OD Green, MultiCam, Krpytek Highlander, Black
Shell loops on the outside to hold 10 rounds for quick access
PALS webbing on the back for multiple mounting options
Divider inside to separate live rounds from fired brass
Heavy duty #10 zipper with 550 cord pull
Bar tacks at critical wear areas for added strength
Double stitched binding around edges for added strength
No more having ammo rattle in boxes as you move
Empty bag weighs 4.5 ounces, full with 100 rounds of .308 175 SMK rounds is right at 6 pounds -
Sale! Out of stock
Gray Ops CNC – Billet Slider – .22 Ammo Case 50 rnds
Original price was: $229.00.$189.00Current price is: $189.00. Select options This product has multiple variants. The options may be chosen on the product pageDiscover the Gray Ops CNC Billet Slider – .22 Ammo Case, your ultimate solution for carrying and accessing 22LR ammo with unparalleled ease. Safely store and conveniently access your rounds using factory 50 ct. plastic sleeves or compatible sleeves from various brands.
-
Sale!
Armageddon Gear 40/40 Ammo Holder
$89.00 – $98.00 Select options This product has multiple variants. The options may be chosen on the product pageThe 40/40 Ammo Holder finally provides a secure and quiet way to tote enough ammo for a day of match shooting in all conditions.
-
Sale!
OBi LINK SYSTEM — GRIP ON ROUND
Original price was: $159.99.$119.99Current price is: $119.99. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
Tab Gear Magazine Pouch
$69.99 Select options This product has multiple variants. The options may be chosen on the product pageMany shooters have several weapon systems that require different sized magazines. Some of them require 20 round mags, some of them use 10 round mags, and some 5 round mags. One of the problems caused by this is that there must be different magazine pouches for different magazines.
With the TAB GEAR Short Action Mag Pouch, SAMP, you can go from shooting your 20 round magazines to your bolt gun that uses 5 round mags and never have to change mag pouches. You would simply activate the built in short shelf which takes less than a minute to set up, and you’re back in the game. No more having to put foam in the bottom of the mag pouch for your short magazines.
If you are running 10 round and 5 round AICS magazines leave one shelf in the long configuration and set up the short shelf on the other mag pouch and you can barely tell the difference in how the bottoms of the mags stick up from the pouch top.The TAB GEAR SAMP can fit all PALS and MOLLE systems, as well a regular pants belt.
If you want to train but don’t need a whole vest, battle belt, etc. simply slide a mag pouch or two onto your belt and hit the range.The TAB GEAR SAMP is extremely versatile, and can be rapidly configured to fit every short action sized magazine on the market that we’ve tested it in.
P-Mag 7.62 20 round mag
Larue 7.62 20 round mag
M14/M1A 20 round mag
Alpha Mag 10 round mag
AI AW 7.62 10 round double stack mag
AICS 7.62 10 round mag
AICS 7.62 5 round mag
Sako 10 round magFeatures:
The mouth of the mag pouch has been reinforced with a very stiff material inside that helps the pouch maintain it’s shape even when the mag is removed. It’s very easy for the magazine to be reinserted with one hand.
The pouch can be installed on anything that has PALS, or MOLLE webbing.
Each SAMP comes with two Malice Clips for installation.
The SAMP can also be threaded onto a regular belt too.
The SAMP also has PALS loops on the front so pouches can be stacked.
Secure built in “ Short Shelf” that won’t fail when using shorter magazines. No more having to insert foam into the bottom of your magazine pouch to keep the magazine from collapsing to the bottom of the pouch.
1/8” shock cord secures the magazines and is easily adjusted from long mags to short mags. -
Sale!
OBi LINK SYSTEM — GRIP ON SQUARE
Original price was: $159.99.$119.99Current price is: $119.99. Add to cartThe Grip On Square is excellent for connecting tripods and water bottles to your backpack or belt. Most Commonly used on the leg of a tripod to attach a camera or pair of binoculars. The square post is anti-rotation keeping your gear in a safe, easy-to-access position. The Grip On Square comes standard with a Square Plate, which mounts in any direction. The Grip On Square also comes with a 9-inch strap and will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach. Attach the Grip On Square by loosening the strap until it fits around the gear, pull the strap snugly, then tighten the Allen bolt to the desired tension.
*GRIP ON Square*
-Fits Tripod-
-Fits Water Bottle-
-Fits Cup-
-Connects to Lock Family-
-Connects to Grip On Family- -
Sale!
OBi LINK SYSTEM — CLAMP LOCK WITH TEK-LOK
Original price was: $79.99.$63.99Current price is: $63.99. Add to cartThe Clamp Lock with TEK-LOK attaches to your backpack or belt strap. Once mounted to your backpack or belt, you can connect any round or square posts.
—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-
*CLAMP LOCK with TEK-LOK*
-Attaches to belt or 1.5-inch strap
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
-
Sale!
OBi LINK SYSTEM – P-A Quick Mount
Original price was: $144.99.$108.74Current price is: $108.74. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
Sale!
OBi LINK SYSTEM — ROUND POST M-LOK Mini
Original price was: $55.99.$41.99Current price is: $41.99. Add to cartThe OBi Link System Round Post M-lok Mini is a smaller version of the regular-sized RPM. This mini M-Lok Post mounts to the M-lok slot on the forend of your rifle stock or any other piece of gear with an M-lok slot or similar hole spacing.
Once it is attached to your rifle or other equipment, it can connect to the Clamp Lock, Slide Lock, or Grip On Round.
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart