Clamps | Insite Arms

Sale!
Gray Ops LabRadar ARCA
Original price was: $59.00.Current price is: $41.30. Add to cart
PURPOSE:

Give your Labradar a 4-way directional Arca mount that will not wiggle loose due to its anti-rotate design

FEATURES:

Machined from 6061 Aluminum

Orange Anodizing for looks and protection

4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions

Fits any standard arca swiss tripod attachment

Stainless Steel 1/4-20 captive screw included
Sale!
Gray Ops Double Arca – Mini Plate Tac Table Adapter
Original price was: $72.00.Current price is: $50.40. Add to cart

Revolutionize your hunting and competition shooting with the Gray Ops Double Arca – Mini Plate Tac Table Adapter, a tool designed to convert any Mini Plate or Mini Plate PRO into a universal tripod tac-table.
Gray Ops Atlas BiPod ARCA Clamp Adapter
$169.00 Add to cart
PURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
Sale!
Gray Ops 4-Way Dovetail Mount Standard
Original price was: $55.00.Current price is: $38.50. Add to cart
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined with cork insert to keep optics/accessories secure from loosening
- Includes ¼-20 screw
Sale!
Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)
Original price was: $298.00.Current price is: $208.60. Add to cart
Get the perfect balance with External forend weights.Â Designed for M-Lok chassis with configurations similar to the MPA Matrix.

FEATURES
- Black Nitride finish
- Integral Flush cup
- Shaped to be support hand friendly during push/pull/press positional shooting
- Compatible with MPA internal weight kits on Matrix
- Full kit (6 weights) includes 4 short weights and 2 long weights
- Full kit adds just over 2.5 pounds (41 oz.)
- Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
- Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)
Available with all M-Lok Hardware
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
Sale!
Gray Ops 4-Way Dovetail Mount Anti-Rotate
Original price was: $64.99.Current price is: $45.49. Add to cart

NOTES:

This product has an Anti-Rotate Pin (PLEASE MAKE SURE your accessory has an opening for it

PURPOSE:

Attach to bottom of scopes, binoculars, or anything with ¼-20 threads

FEATURES:

Machined from 6061 Aluminum
Type II Black Anodizing
4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
Universal design for use with any Arca clamp
Extra ¼-20 in bottom for attaching to non-arca tripods
Low profile design
Sale!
Gray Ops Shell Holder Block
Original price was: $79.00.Current price is: $55.30. Add to cart
Sale!
Gray Ops Outdoorsman Arca Adapter
Original price was: $59.00.Current price is: $41.30. Add to cart
NOTES:
- This product only works with Outdoorsmans Binocular Mounts and is specifically designed with custom anti-rotate pins for exact fitment.
- Does not include Outdoorsmans Binocular Mount
PURPOSE:
- Attach to bottom of Outdoorsmans Bino Mounts for a true Anti-rotate arca adapter
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins to fit Outdoorsmans Bino Mount
- Includes “captured” 1/4-20 screw
Sale!
Gray Ops Tray Block
Original price was: $79.00.Current price is: $55.30. Add to cart
Sale!
Gray Ops Ckye-Pod ARCA Clamp Adapter
Original price was: $199.00.Current price is: $169.00. Add to cart
PURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
Sale!
Armageddon Mini Plate Pro Pad – Standard Fill
Original price was: $99.99.Current price is: $79.00. Select options This product has multiple variants. The options may be chosen on the product page

DESCRIPTION

The Mini Plate Pro Pad is designed to perfectly match up to the Gray Ops Mini Plate Pro. The Mini Plate Pro Pad provides the user a small, light and extremely stable shooting platform while keeping both hands on the rifle. The Mini Plate Pro Pad is the perfect solution for building a stable shooting position in a small opening where the Gamechanger is too tall. The user can easily adjust the amount and type of fill with the built in fill spout. The Mini Plate Pro Pad comes filled with our standard poly bead fill.

Please note; The Mini Plate Pro shown in the images is not included. This is the pad only – you’ll need to purchase the Mini Plate Pro separately.
Sale!
Gray Ops CNC – Brass Magneto Speed V3 Mount – Complete with Arca Clamp
Original price was: $359.00.Current price is: $251.30. Add to cart

The Gray Ops CNC Magneto Speed V3 Mount With ARCA Clamp allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
Sale!
Gray Ops Harris Bipod QDA
Original price was: $104.99.Current price is: $73.49. Add to cart
PURPOSE
- The Quick Detach Adapter allows a Harris notched leg bipod to use Atlas style feet/accessories. Different style feet can be changed out in seconds with no tools required. Perfect for competition or hunting scenarios where you must adapt to the specific task at hand.
- Eliminates the need to carry multiple bipods
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Set screw allows for a rigid, “no wiggle” lock-up on your Bipod
- Remove your atlas foot/accessory quick and easy with the spring loaded button
- Adds approximately 1” total height to the bipod
- Allen wrenched included for easy installation
ATLAS BT23 Ski Feet
$80.90 Add to cart

BT23: Atlas Ski Feet

The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only. NSN 1005-01-640-8881

Weight: 1.5 ounces

Product will work on V8, PSR and CAL models only.
BT46-NC PSR Atlas Bipod: Standard height
$391.40 Add to cart
BT46-NC PSR Atlas Bipod: Standard height No Clamp
The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.

It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.

The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).

Height Range: 5 – 9.4″ (6.5” at 90°)

Preloaded Pan: 30 degrees

Preloaded Cant: 30 degrees

Position Button 0.5″ diameter

Fore and Aft pivot limiting Bosses

5 leg positions: 0, 45, 90, 135 & 180 degrees

Non-Rotating Legs: outer leg does not rotate around inner leg

Larger, stronger inner legs

Weight: 11.42 ounces approx.

Footprint: 8–11″
Sale!
Rangefinder Extension Adapter GRAY OPS CNC
Original price was: $98.99.Current price is: $69.29. Add to cart

NOTES:

Designed for rangefinders/optics without the anti-rotate pin
This product requires a 4-side dovetail adapter to be ARCA mounted. Can still be mounted to non-arca tripods via ¼-20 threaded hole in bottom
Some pictures shown with optional adapter

PURPOSE:

Allows 3” of extra optic/accessory travel
Moves optic closer to edges of AMP Plates

FEATURES:

Machined from 6061 Aluminum
Type II Black Anodizing
Includes sliding ¼-20 captive screw
Extra ¼-20 threaded hole in bottom for different attachment methods
Sale!
Gray Ops CNC – Brass Magneto Speed V3 Mount (Without ARCA Clamp)
Original price was: $199.00.Current price is: $139.30. Add to cart

The Gray Ops CNC Magneto Speed V3 Mount allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.

NOTE: This product does not come with the ARCA Clamp, for the mount with the clamp, please see Brass Magneto Speed V3 Mount With Clamp.
Sale!
Thumb-Rest / Thumb-Rail MPA Chassis GRAY OPS CNC
Original price was: $89.00.Current price is: $62.30. Add to cart

Purposes

Enhanced grip/comfort for barricade style positional shooting
Compatable with MPA BA Chassis 4 hole or older 6 hole NV bridge chassis

Features

Machined from 6061 Aluminum and Hardcoat Black Anodized
Ergonomic comfortable cutouts
Machined for perfect fit to blend into chassis contours
Barricade Rail utilizes existing screws from factory picatinny rail
Thumb rest utilized 4 supplied T-15 torx screws
Sale!
Gray Ops CNC – Brass Magneto Speed V3 Mount Angled Adapter
Original price was: $35.00.Current price is: $24.50. Add to cart

Elevate your shooting precision with the Gray Ops Brass Magneto Speed V3 Mount Angled Adapter, expertly designed to ensure perfect parallel alignment of the Magneto Speed V3 Bayonet to your angled forends on hunting or traditional style stocks/chassis.
Atlas B&T BT30-R: Black Atlas Bipod Pouch
$80.90 Add to cart

BT30-B: Black Atlas Bipod Pouch

The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.

It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.

Made out of 1000 denier corder nylon.
MasterPiece Arms ( MPA ) Magwell Plate: Hook -for Matrix Pro
$83.99 Add to cart

This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

The plates can be purchased individually or a complete kit. See the drop down menu for options.

Machined from Solid 6061 aluminum, black anodized, ready to install.

These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

Here is a link to this product upgrade.

If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.