-
MasterPiece Arms ( MPA ) Magwell Plate: Teeth -for Matrix Pro
$83.99 Add to cartThis magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.
The plates can be purchased individually or a complete kit. See the drop down menu for options.
Machined from Solid 6061 aluminum, black anodized, ready to install.
These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).
These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.
If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.
Here is a link to this product upgrade.
If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
-
MasterPiece Arms ( MPA ) Magwell Plate: Hook -for Matrix Pro
$83.99 Add to cartThis magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.
The plates can be purchased individually or a complete kit. See the drop down menu for options.
Machined from Solid 6061 aluminum, black anodized, ready to install.
These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).
These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.
If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.
Here is a link to this product upgrade.
If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
-
MasterPiece Arms ( MPA ) Magwell Plate: Complete Kit for Matrix Pro ( Blocker, Hook & Teeth )
$219.99 Add to cartThis magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.
The plates can be purchased individually or a complete kit. See the drop down menu for options.
Machined from Solid 6061 aluminum, black anodized, ready to install.
These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).
These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.
If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.
Here is a link to this product upgrade.
If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
-
MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro
$83.99 Add to cartThis magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.
The plates can be purchased individually or a complete kit. See the drop down menu for options.
Machined from Solid 6061 aluminum, black anodized, ready to install.
These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).
These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.
If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.
Here is a link to this product upgrade.
If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
-
Gray Ops Extra Reloading Stand “ARM”
$12.99 Add to cartFor those who are taking their “Reloading Stand” to the next level and need an extra “Arm”
-
Atlas BT65 Gen 2 CAL Bipod
$357.60 Read moreThe BT65 CAL (Cant And Loc) Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low pro le two screw clamp assembly. It was developed for shooters that do not desire the Panning feature of the V8 or PSR series of Atlas bipods. The BT65 has larger Inner legs, patented 5 leg positions that do not rotate found on the Atlas PSR series, quick change feet and “hold what you move technology.” We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc.” Available in black only.
-
ATLAS BT81: Lil’ Brandi
$73.99 Add to cartThe BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.
It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.
Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
- Dimensions: 1.95 x 1.5 x 0.663 in
- Weight: 0.89 ounces
Weight: 1.20 ounces
-
ATLAS BT63: Nose Rail
$72.39 Add to cartThe BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Overall Length: 7.0″
- Picatinny Rail Section Length: 2.0″
- Center-to-center Hole Spacing: 3″ and 3.75″
- Weight: 2.6 ounces
-
Area 419 ARCALOCK Spigot Extension FOR 5H BIPOD ARCA RAIL USE
$41.00 Add to cartIt is ideal to adapt our BT35-NC 5-H Atlas Bipod to an ARCA clamp for clearance of the cradle and operation of the clamp’s knob. It will also extend all “NC” or No Clamp models (view complete list below) of Atlas Bipods out extra 1.25″ for increased stability. To use with your Bipod that already has a clamp, lever or mount installed, simply remove it to attach the spigot.
This spigot is manufactured by Area 419 NOT by B&T Industries L.L.C. Includes two 10-32 x 3/8″ flathead socket screws and two 10-32 x 5/8″ flathead socket screws.
- Weight: 1.79 oz
- Dimensions: 3.2 × 1.24 × 0.35 in
-
MasterPiece Arms ( MPA ) RAT Magnetospeed Adaptor for BA COMP / Matrix ESR with Muzzle Brake
$129.99 Add to cartThis magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.
The plates can be purchased individually or a complete kit. See the drop down menu for options.
Machined from Solid 6061 aluminum, black anodized, ready to install.
These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).
These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.
If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.
Here is a link to this product upgrade.
If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
-
Rangefinder PLRF 25 Arca Mount
$91.99 Add to cartPURPOSE:
- Attach to bottom of PLRF25 Vectronix Rangefinders for use in 1.5” Arca Clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins for secure fit onto LRF
- Custom machined for exact fitment and access to battery compartment
- Textured surface for “thumb grip” during offhand use
- Includes ¼-20 screw
-
Rangefinder PLRF 10/15 Arca Mount
$83.99 Add to cartMade specifically for the Vectronix line of PLRF 10 and 15 rangefinders.
- Machined from one piece 6061 Aluminum
- Hard anodized black
- 4-directional Arca dovetail
- Built in anti-rotate pins for rock solid lockup
- Anti-slip grooves cut for added grip when using offhand
- Exact fit to follow contour of rubber LRF housing
- Stainless steel hardware included
-
ATLAS BT70: Atlas M-LOK® Adapter
$47.10 Add to cartThe BT70 Atlas M-LOK® Adapter is an interface between all Atlas Bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting.
Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 3.15″
- Width: 1.11″
- Weight: 1.135 oz
-
Atlas BT72-NC Super Cal Bi-Pod
$506.00 Add to cartBT72-NC Super CAL Atlas Bipod
The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This “No Clamp” model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT72-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.
Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology™.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.
- Height Range: 5.6 – 10.8” (7.4” at 90°)
- Preloaded Cant: 45 degrees
- Position Button: 0.5″ diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.3 ounces
- Footprint: 14.75-19.37″
-
BT47-NC PSR Atlas Bipod: Tall No Clamp
$418.00 Read moreThe BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.
It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.
The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 6.2 – 12.5″ (8.3” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5″ diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.86 ounces approx.
- Footprint: 10-14.5″
-
Sale!
Gray Ops Turret Guards – MPA BA Scope Mount (New Style Only)
Original price was: $109.99.$82.49Current price is: $82.49. Add to cart***Only Compatible with new style MPA BA Scope mount with side tapped holes***
PURPOSE
- Added protection for your scope turrets
- Prevents “rolling a turret” during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall elevation and (1) Short Right hand windage turret guard
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to “load” into
-
-
BT65-NC Gen 2 CAL Atlas Bipod
$357.60 Add to cartThe BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size ”Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT65-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.
It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.
- Height Range: 4.8 – 9.2″ (6.4” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5″ diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.736 ounces
- Footprint: 9–12.5″
-
Tiburon™ Backpack 34L
$337.00 Select optionsThe Tiburon Backpack is an ergonomic pack with quick release yoke-style straps. There is a top zippered slip pocket with a loop field for patch adhesion, a front admin pocket for added organization, two (2) zippered side pockets, a middle tech compartment, and a fully opening & lockable middle compartment. Main compartment can fit a 15.4″ laptop. The middle tech compartment has a padded pocket sized to fit a 13″ laptop and most tablets. The main compartment has a pocket for the hydration reservoir, and there are dual hydration tube ports.
-
Riftcore™ CCW-Enabled Backpack 23L
$288.00 – $289.00 Select optionsAGR™ Advanced Gear Research: Riftcore™ CCW-Enabled Backpack
The Riftcore Backpack is an ergonomic pack with quick release yoke-style straps. It is equipped with two locations for CCW placement, including a fully loop-lined rear compartment with two-way access. The middle compartment, which has a full clamshell opening, comes with multiple loop-lined adjustable straps that can be repositioned to make organizing and locating contents much easier. The semi-rigid fleece-lined EVA pocket on the front of the pack is ideal for storing sunglasses, electronics, or valuables.
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart