Showing 22–42 of 118 resultsSorted by popularity

Filter
  • Sale! The "Heathen" G2 5-Port Muzzle Brake Stainless - NO Slot For Tuner - Clean Brake Body

    The “Heathen” G2 5-Port Muzzle Brake Stainless – NO Slot For Tuner – Clean Brake Body

     Original price was: $179.00.Current price is: $149.00. Select options This product has multiple variants. The options may be chosen on the product page

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The G2 Heathen has optimized specific features for competition and precision marksmen demanding the utmost in performance from a large bodied muzzle brake.

  • Silent Ammo Carrier TAB Gear

    Silent Ammo Carrier TAB Gear

     Select options This product has multiple variants. The options may be chosen on the product page

    The TAB GEAR SAC addresses the issues that you have to deal with when carrying a lot of ammo.

    The SAC will hold 100 rounds of .308 ammo. It also has ammo loops on the outside that will hold 10 rounds for quick access. There is a divider inside that allows the shooter to easily segregate live rounds from fired brass.
    It is very easy to store fired brass, no more trying to insert them back into shell loops or throwing them into a pack pouch to dig out later. Simply throw the empty brass into the inside compartment of the SAC and they are ready to dump out later.

    1000 Denier Cordura available in Coyote Brown, OD Green, MultiCam, Krpytek Highlander, Black
    Shell loops on the outside to hold 10 rounds for quick access
    PALS webbing on the back for multiple mounting options
    Divider inside to separate live rounds from fired brass
    Heavy duty #10 zipper with 550 cord pull
    Bar tacks at critical wear areas for added strength
    Double stitched binding around edges for added strength
    No more having ammo rattle in boxes as you move
    Empty bag weighs 4.5 ounces, full with 100 rounds of .308 175 SMK rounds is right at 6 pounds

  • Armageddon Gear 40/40 Ammo Holder

    Armageddon Gear 40/40 Ammo Holder

     Select options This product has multiple variants. The options may be chosen on the product page

    The 40/40 Ammo Holder finally provides a secure and quiet way to tote enough ammo for a day of match shooting in all conditions.

  • Sale! ThorroClean Bore Cleaning System – 118ml Bottles

    ThorroClean Bore Cleaning System – 118ml Bottles BULK 5-PACK

     Original price was: $179.99.Current price is: $159.00. Add to cart

    Bullet Central teamed up with Iosso Products to develop a breakthrough bore-cleaning product. ThorroClean Bore Cleaning System provides a quick and thorough cleaning of the rifle bore. It completely removes copper and carbon fouling quickly, without any wait time and difficult cleanup. The active ingredients are gentle on a barrel and should be used in the same cycle as you would your regular cleaning regimen. Included: ThorroClean Bore Cleaner ThorroClean Bore Flush Description You can develop your own cleaning method but we know that the following works. You should have a well designed and made bore guide. It also helps the cleaning process if you have a solvent port as it is easier to administer ThorroClean.

    Step 1 Push a wet tight patch through your bore to push the excess of carbon lying in the barrel. This gets rid of the loose fouling in the barrel.

    Step 2 Liberally introduce some ThorroClean (about a teaspoon full) to a good bore brush.  Stroke the barrel forward out through the crown and back about 10 to 15 times. Check to see if you have enough ThoroClean on your brush.

    Step 3 Push a dry patch through the barrel and follow that up with patches liberally doused in ThorroFlush. You should be able to clean all the ThorroClean out of the barrel with 2 or 3 patches. Make sure that you do not have excess ThorroClean in your solvent port Check it out with your borescope.

  • Sale! Gray Ops CNC MasterPiece Arms Matrix & Matrix Pro Side Rail Weights - Steel

    Gray Ops CNC MasterPiece Arms Matrix & Matrix Pro Side Rail Weights – Steel

     Original price was: $189.00.Current price is: $132.30. Add to cart

    PURPOSE

    • Give the perfect balance point to your MPA BA Comp/Matrix/ESR Chassis when combined with the MPA Competition Side Rails
    • Added weight Reduces recoil and adds stability
    • Added locations for hand gripping

    FEATURES

    • Machined from 1018 cold rolled steel
    • Black Nitride finish for superior corrosion and rust resistance
    • Includes 4 weights (two weights per side)
    • Each weight has 3 built in flush cup locations (12 total per kit) for each sling and accessory attachment
    • Adds 27.4 ounces per 4 weight kit
    • BA Comp Kit Dimensions roughly 0.6 x 0.6 x 5.25”
    • Matrix/ESR/Matrix PRO Kit Dimensions roughly 0.5 x 0.6 x 6”
    • Hardware to attach to side rails included

    NOTE

    • Side rails (shown in picture) purchased separately from MPA website must be installed to utilize these weights
  • Sale! Gray Ops 4-Way Dovetail Mount Standard

    Gray Ops 4-Way Dovetail Mount Standard

     Original price was: $55.00.Current price is: $38.50. Add to cart
    • Machined from 6061 Aluminum
    • Hard Black Anodizing
    • 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
    • Works with any standard 1.5” Arca clamp
    • Low profile design
    • Custom machined with cork insert to keep optics/accessories secure from loosening
    • Includes ¼-20 screw
  • Morale Patches - Major League Shooter

    Morale Patches

     $5.99 Select options This product has multiple variants. The options may be chosen on the product page

    Personalize your kit with Maxpedition morale patches, featuring original artwork executed with the utmost attention to detail. All patches are backed with hook velcro for attachment to loop velcro areas on bags, packs or outerwear.

  • Sale! Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long - MATRIX FIT with Screws

    Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)

     Original price was: $298.00.Current price is: $208.60. Add to cart

    Get the perfect balance with External forend weights.  Designed for M-Lok chassis with configurations similar to the MPA Matrix.

    FEATURES

    • Black Nitride finish
    • Integral Flush cup
    • Shaped to be support hand friendly during push/pull/press positional shooting
    • Compatible with MPA internal weight kits on Matrix
    • Full kit (6 weights) includes 4 short weights and 2 long weights
    • Full kit adds just over 2.5 pounds (41 oz.)
    • Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
    • Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)

    Available with all M-Lok Hardware

    • Short Pair (2 Short weights)
    • Long Pair (2 Long weights)
    • Full Kit (4 Short weights and 2 Long weights)

    Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)

    • Short Pair (2 Short weights)
    • Long Pair (2 Long weights)
    • Full Kit (4 Short weights and 2 Long weights)
  • Sale! Gray Ops 4-Way Dovetail Mount Anti-Rotate

    Gray Ops 4-Way Dovetail Mount Anti-Rotate

     Original price was: $64.99.Current price is: $45.49. Add to cart

    NOTES:

    This product has an Anti-Rotate Pin (PLEASE MAKE SURE your accessory has an opening for it

    PURPOSE:

    Attach to bottom of scopes, binoculars, or anything with ¼-20 threads

    FEATURES:

    Machined from 6061 Aluminum
    Type II Black Anodizing
    4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
    Universal design for use with any Arca clamp
    Extra ¼-20 in bottom for attaching to non-arca tripods
    Low profile design

  • Sale! The "Heathen" G2 4-Port Muzzle Brake - Stainless NITRIDE BLACK FINISH

    The “Heathen” G2 4-Port Muzzle Brake – Stainless NITRIDE BLACK FINISH

     Price range: $149.00 through $159.00 Select options This product has multiple variants. The options may be chosen on the product page

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The G2 Heathen has optimized specific features for competition and precision marksmen demanding the utmost in performance from a large bodied muzzle brake.

  • Armageddon Gear GARMIN XERO C1 PRO CASE -

    Armageddon Gear GARMIN XERO C1 PRO CASE –

     Select options This product has multiple variants. The options may be chosen on the product page

    The Garmin Xero C1 Pro has quickly become a critical piece of equipment. Keeps yours protected and close at hand with the new Armageddon Gear Garmin Xero Case. The Garmin Xero Case is basically a hard case sewn into 500d corudra nylon. The Case have over an inch of open cell foam padding, laminated to air mesh to keep the unit securely in place and protected, like in the chubby little hands of baby angels. As all of our products the Garmin Xero Case is made in America and guaranteed for life. Available in ranger green and black/grey.

  • Tab Gear Sling Thing

    Tab Gear Sling Thing

     Select options This product has multiple variants. The options may be chosen on the product page

    How many times have you needed to zero your scope turrets, and either didn’t have or couldn’t find, the wrenches handy to do the job? If you shoot a scoped rifle chances are you’ve been in this situation before, probably several times.

    If you have an illuminated reticle have you ever tried to turn it on only to find that the battery is dead? Maybe it’s been in a while and you figure it’s about time to change it out, but you can’t remember where you stashed the spare battery.

    We’ve come out with a handy little item to take care of both of those troublesome situations so you won’t have to worry about either of them any more.

    There is room for four Allen / Torx wrenches in the two slot pockets and a pocket to hold your illuminated reticle battery. The elastic on the back of the Sling Thing allows you to thread it onto your sling anywhere and the Sling Thing is always there yet out of the way, until you need your tools or battery. The Sling Thing closes securely with Velcro.

    We are offering the Sling Thing in our three main colors, Coyote Brown, OD Green, and Black.

    Features:

    • Room for four Allen / Torx wrenches in the two slot pockets
    • Pocket to hold your illuminated reticle battery
    • Elastic backing to thread onto your sling anywhere
    • Velcro adjustment to keep closed securely
    • Always there yet out of the way until needed
  • Sale! Gray Ops Shell Holder Block

    Gray Ops Shell Holder Block

     Original price was: $79.00.Current price is: $55.30. Add to cart
  • Sale! Gray Ops CNC - Bag Stop – Mini Plate Mount

    Gray Ops CNC – Bag Stop – Mini Plate Mount

     Original price was: $139.99.Current price is: $97.99. Add to cart

    Introducing Gray Ops CNC Bag Stop – Mini Plate Mount, the perfect shooting accessory to enhance stability while avoiding magazine contact, ensuring reliable feeding for your rifle. Designed for use with Mini Plate V2 and Mini Plate PRO, this bag stop is lightweight, expertly contoured, and easy to install with two steel hex bolts.

  • Sale! Gray Ops Outdoorsman Arca Adapter

    Gray Ops Outdoorsman Arca Adapter

     Original price was: $59.00.Current price is: $41.30. Add to cart

    NOTES:

    • This product only works with Outdoorsmans Binocular Mounts and is specifically designed with custom anti-rotate pins for exact fitment.
    • Does not include Outdoorsmans Binocular Mount

    PURPOSE:

    • Attach to bottom of Outdoorsmans Bino Mounts for a true Anti-rotate arca adapter

    FEATURES:

    • Machined from 6061 Aluminum
    • Hard Black Anodizing
    • 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
    • Works with any standard 1.5” Arca clamp
    • Low profile design
    • Custom machined anti-rotate pins to fit Outdoorsmans Bino Mount
    • Includes “captured” 1/4-20 screw
  • Sale! Gray Ops Shell Tray Block

    Gray Ops Tray Block

     Original price was: $79.00.Current price is: $55.30. Add to cart
  • Sale! Gray Ops Ckye-Pod ARCA Clamp Adapter

    Gray Ops Ckye-Pod ARCA Clamp Adapter

     Original price was: $199.00.Current price is: $169.00. Add to cart

    PURPOSE

    • Attaches to Harris, Cyke-Pod, and Atlas style Bipods
    • Quickly and reliably attach/detach your bipod via our adjustable tension throw lever

    FEATURES

    • Easy/ergonomic gripping of lever for attach/detach
    • Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full “Nut” rotation which adjusts the tension .002 per position
    • QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
    • Main housing machined from 6061 Aluminum and hard coat black anodized
    • Harris bipod version includes QD Arca clamp and Harris adapter
    • Atlas version includes QD Arca clamp
    • Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
  • Armageddon Mini Plate Pro Pad

    Armageddon Mini Plate Pro Pad – Standard Fill

     Select options This product has multiple variants. The options may be chosen on the product page
    DESCRIPTION
    The Mini Plate Pro Pad is designed to perfectly match up to the Gray Ops Mini Plate Pro. The Mini Plate Pro Pad provides the user a small, light and extremely stable shooting platform while keeping both hands on the rifle. The Mini Plate Pro Pad is the perfect solution for building a stable shooting position in a small opening where the Gamechanger is too tall. The user can easily adjust the amount and type of fill with the built in fill spout. The Mini Plate Pro Pad comes filled with our standard poly bead fill.
    Please note; The Mini Plate Pro shown in the images is not included. This is the pad only – you’ll need to purchase the Mini Plate Pro separately.
  • Sale! Gray Ops Brass Magneto Speed V3 Mount Complete with Arca Clamp

    Gray Ops CNC – Brass Magneto Speed V3 Mount – Complete with Arca Clamp

     Original price was: $359.00.Current price is: $251.30. Add to cart

    The Gray Ops CNC Magneto Speed V3 Mount With ARCA Clamp allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.

  • Gray Ops 6GT AW Magazine

    Gray Ops 6GT AW Magazine

     $259.00 Add to cart

    The Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.

  • Short Action Precision ( SAP ) AMC Adaptive Mag Carrier System

    Short Action Precision ( SAP ) AMC Adaptive Mag Carrier System

     Select options This product has multiple variants. The options may be chosen on the product page

    The SAP AMC is the result of the growing demand for a precision rifle mag holster that is flexible enough to fit most precision mags on the market. This holster has an adjustable tension system that will allow you to adapt the retention to most any magazine that you throw at it. It also has enhanced features like a flared opening for easy mag insertion, a bottom that is mostly closed to keep dust and dirt from entering, as well as a bumper system that is included for enhanced use with .22 mags and shorter mags like 5 round or AW double stack mags.

    Check out the Video Below to See All the Features!

    Comes In Your Choice Of:

    • Regular 1.5″ High Strength SAP Belt Clip
    • Add an additional 1.75″ SAP Belt Clip for larger belts
    • Molle webbing model
    • Combat Loop Locking Belt Clip (adjustable for belt width up to 2″)

     

    All AMC Versions come with:

    • Adjustable Tensioner for Wide Range of Mag Compatibility
    • Coyote, Black, and OD colors
    • Protects the rounds while in the holster with closed bottom
    • Comes with .22 Mag / Short Mag Bumper Kit
    • Easily Adjustable with 1/8″ Allen (Not Included)
    • Max mag dimensions: 3.08″L x 1″W
    • Made in USA

     

    We have tested the following mags to work with this holster:

    • AICS 10 Round Single Stack (3902)
    • AW 10 Round Double Stack (7602)
    • AX 10 Round Single Stack  (6955)
    • AX 10 Round Double Stack (6677)
    • AICS 5 Round (3901)
    • AICS 10 Round .223 Mag
    • Accurate-Mag .308 (Long and Regular)
    • Accurate-Mag .223
    • Accurate-Mag .300WSM/6.5PRC
    • ARC 10 Round
    • Bergara B-14R
    • Bergara B-14 Centerfire
    • Magpul .308 AICS Style Mags
    • MDT Metal 10 Round (Regular and No Binder)
    • MDT Metal 12 Round (Regular and No Binder)
    • MDT Metal BR/Dasher 12 Round
    • MDT Poly .308 10 Round Gen II
    • MDT Poly .223 10 Round *
    • MDT Poly/Metal 10 Round *
    • Sako TRG 22
    • Tikka CTR
    • Tikka TAC A1
    • Vudoo Poly Mags
    • Vudoo Aluminum Mags
    • Zermatt RimX

     

    * Note: We use official Crye pattern Multicam Kydex in making these, and as such it is a random pattern so there are variances in all pieces and there is no way to guarantee a specific patterning on each holster.

     

    * MDT Poly .223 and Poly/Metal Mag fitment is depth limited to the protruding exterior ribs on the body of the mag. If more depth is desired, ribs would need to be shaved down.

    • 1.5″ or 1.75″ belt clip or Molle Clip Options
    • Coyote, Black, Grey, and OD colors
    • Protects the buttons while in the holster
    • High strength SAP engraved belt clip on belt models
    • Tactical Tailor Malice Clip on Molle models
    • Works for 5700, 5700 Elite, and 5500 units
    • Made in USA
Shopping Cart

Active filters