-
Sale!
Gray Ops Ckye-Pod ARCA Clamp Adapter
Original price was: $198.99.$188.00Current price is: $188.00. Add to cartPURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Gray Ops Harris Bipod QDA
$84.99 Read morePURPOSE
- The Quick Detach Adapter allows a Harris notched leg bipod to use Atlas style feet/accessories. Different style feet can be changed out in seconds with no tools required. Perfect for competition or hunting scenarios where you must adapt to the specific task at hand.
- Eliminates the need to carry multiple bipods
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Set screw allows for a rigid, “no wiggle” lock-up on your Bipod
- Remove your atlas foot/accessory quick and easy with the spring loaded button
- Adds approximately 1” total height to the bipod
- Allen wrenched included for easy installation
-
-
-
Gray Ops Ckye-Pod Clamp Adapter
$58.99 Add to cartPURPOSE:
- Replaces Ckye-Pod clamp making it universal to all Atlas compatible clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard black anodizing
- Includes shorter brass tipped panning set screw
- Adds 0.3125” in height
- Hole machined on bottom to accept the “pan-lock” some versions of Cyke Pod have
Installation:
- Remove existing clamp by loosening set screw on back of bipod
- Pull the clamp off the bipod and save the pull stud and wave washer
- Install the wave washer and pull stud into adapter
- Re-install adapter onto bipod by tightening the set screw on the bipod
- Make sure not to overtighten the pan-lock brass tipped set screw (very minimal pressure needed)
- Install Atlas compatible arca clamp
-
Gray Ops CNC – Brass Magneto Speed V3 Mount (Without ARCA Clamp)
$289.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
NOTE: This product does not come with the ARCA Clamp, for the mount with the clamp, please see Brass Magneto Speed V3 Mount With Clamp.
-
-
Gray Ops Spuhr Ring Turret Guards
$189.99 Add to cart     ***Only compatible with Spuhr Rings***
PURPOSE
- Added protection for your scope turrets
- Prevents ârolling a turretâ during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to âloadâ into
-
Rangefinder Extension Adapter GRAY OPS CNC
$94.99 Add to cartNOTES:
Designed for rangefinders/optics without the anti-rotate pin
This product requires a 4-side dovetail adapter to be ARCA mounted. Can still be mounted to non-arca tripods via ¼-20 threaded hole in bottom
Some pictures shown with optional adapterPURPOSE:
Allows 3” of extra optic/accessory travel
Moves optic closer to edges of AMP PlatesFEATURES:
Machined from 6061 Aluminum
Type II Black Anodizing
Includes sliding ¼-20 captive screw
Extra ¼-20 threaded hole in bottom for different attachment methods -
Armageddon Mini Plate Pro Pad – Standard Fill
$99.99 Select optionsThe Mini Plate Pro Pad is designed to perfectly match up to the Gray Ops Mini Plate Pro. The Mini Plate Pro Pad provides the user a small, light and extremely stable shooting platform while keeping both hands on the rifle. The Mini Plate Pro Pad is the perfect solution for building a stable shooting position in a small opening where the Gamechanger is too tall. The user can easily adjust the amount and type of fill with the built in fill spout. The Mini Plate Pro Pad comes filled with our standard poly bead fill.Please note; The Mini Plate Pro shown in the images is not included. This is the pad only – you’ll need to purchase the Mini Plate Pro separately. -
Gray Ops MPA Matrix PRO – Internal Weight Kit
$234.99 Add to cartPURPOSE
- Add weight forward of the magazine for better balance
- Increase weight for added recoil reduction and spotting shots
FEATURES
- Machined Steel
- Black Nitride finish for corrosion/rust protection
- Includes 8 total weights (7 Regular/1 Contoured to accept Spigot mount)
- Includes Stainless Steel hardware
- Kit adds 30 ounces for forend
- 6 threaded holes per weight to allow location flexibility
- Installs without removing barreled action from chassis
-
Gray Ops Mag-Cut Mini Plate
$214.99 Read moreIntroducing the Gray Ops Mag-Cut Mini Plate, a precision tool designed for increased stability and balance when shooting from Accuracy International / J-Allen Style / similar chassis.
-
-
Gray Ops Harris BiPod ARCA Clamp Adapter
$178.99 Add to cartPURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Gray Ops CNC – Brass Magneto Speed V3 Mount Angled Adapter
$54.99 Add to cartElevate your shooting precision with the Gray Ops Brass Magneto Speed V3 Mount Angled Adapter, expertly designed to ensure perfect parallel alignment of the Magneto Speed V3 Bayonet to your angled forends on hunting or traditional style stocks/chassis.
-
Sale!
Thumb-Rest / Thumb-Rail MPA Chassis GRAY OPS CNC
Original price was: $126.99.$99.00Current price is: $99.00. Add to cartPurposes
Enhanced grip/comfort for barricade style positional shooting
Compatable with MPA BA Chassis 4 hole or older 6 hole NV bridge chassisFeatures
Machined from 6061 Aluminum and Hardcoat Black Anodized
Ergonomic comfortable cutouts
Machined for perfect fit to blend into chassis contours
Barricade Rail utilizes existing screws from factory picatinny rail
Thumb rest utilized 4 supplied T-15 torx screws -
Gray Ops Extra Reloading Stand “ARM”
$12.99 Add to cartFor those who are taking their “Reloading Stand” to the next level and need an extra “Arm”
-
Rangefinder PLRF 25 Arca Mount
$91.99 Add to cartPURPOSE:
- Attach to bottom of PLRF25 Vectronix Rangefinders for use in 1.5” Arca Clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins for secure fit onto LRF
- Custom machined for exact fitment and access to battery compartment
- Textured surface for “thumb grip” during offhand use
- Includes ¼-20 screw
-
Rangefinder PLRF 10/15 Arca Mount
$83.99 Add to cartMade specifically for the Vectronix line of PLRF 10 and 15 rangefinders.
- Machined from one piece 6061 Aluminum
- Hard anodized black
- 4-directional Arca dovetail
- Built in anti-rotate pins for rock solid lockup
- Anti-slip grooves cut for added grip when using offhand
- Exact fit to follow contour of rubber LRF housing
- Stainless steel hardware included
-
Sale!
Gray Ops Turret Guards – MPA BA Scope Mount (New Style Only)
Original price was: $109.99.$82.49Current price is: $82.49. Add to cart***Only Compatible with new style MPA BA Scope mount with side tapped holes***
PURPOSE
- Added protection for your scope turrets
- Prevents “rolling a turret” during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall elevation and (1) Short Right hand windage turret guard
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to “load” into
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart