Shop | Insite Arms

Out of stock
SPUHR Separate Rings SR-4000 Ø34 H25.4MM PIC
$469.00 Read more

Article no.: SR-4000

Height: 25.4 mm/1” Length: 32 mm/1.26” Weight: 183 g/6.5 oz Includes the A-0080/81 Leveling Kit
Out of stock
Lapua 4PH8090: .338 Norma Mag Cases 100/Box
$449.00 Read more

Lapua LU4PH6050 .260 Rem Cases 100/box

The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
The most precise cases on the market

Lapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
Lapua cases are manufactured to be reloaded, again and again, dozens of times.
Case construction
Base
The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
Body
The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
Neck
Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading.
Insite Arms Loading Block 100 ct. Each Side Used for different Case Sizes- 2″ THICK BLOCK
$249.99 Select options This product has multiple variants. The options may be chosen on the product page

Milled from a solid 14″ x 2″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

This Block can accommodate holes for cartridges on both sides Top and Bottom. This allows the block to be used for 2 different sized cartridges.

-100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

-At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred

– Includes a generous sized Bullet or Parts tray for convenience.

– The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

Dimensions: 14″x 6″x 1″
Out of stock
Federal 6mm Creedmoor 105gr Berger Hybrid – Gold Medal CANADIAN ORDERS ONLY
$54.99 Read more

Product Overview
The most sought-after bullets among competitors on the Precision Rifle Series are now loaded into the industry’s most trusted factory rifle ammunition. Gold Medal® Berger® loads feature an advanced boat-tail bullet with a high ballistic coefficient to provide the flattest trajectories, less wind drift and surgical long-range accuracy. The loads use Gold Medal match primers, Federal® brass and specially formulated propellant, and they adhere to Federal Premium’s strictest specifications for accuracy, pressure and velocity.

-Most popular bullets at Precision Rifle Series events
-Extremely high ballistic coefficient
-Less wind drift and drop
-World-class long-range accuracy
-Gold Medal match primer
-Loaded to Federal Premium’s tightest specifications
Sale!
Thumb-Rest / Thumb-Rail MPA Chassis GRAY OPS CNC
Original price was: $126.99.Current price is: $99.00. Add to cart

Purposes

Enhanced grip/comfort for barricade style positional shooting
Compatable with MPA BA Chassis 4 hole or older 6 hole NV bridge chassis

Features

Machined from 6061 Aluminum and Hardcoat Black Anodized
Ergonomic comfortable cutouts
Machined for perfect fit to blend into chassis contours
Barricade Rail utilizes existing screws from factory picatinny rail
Thumb rest utilized 4 supplied T-15 torx screws
Out of stock
Bix’n Andy Tikka T3 Precision Trigger – Top Safety RH
$668.99 Read more

This trigger from Austrian maker Bix’n Andy is designed for use with Tikka T3 & Tikka T3x rifles.

Install one on your rifle and experience the unsurpassed performance you have come to expect from Bix’n Andy!

*** All installations of this trigger must be carried out by a competent gunsmith and with weapon unloaded and pointed in a safe direction. Failure to adhere to this warning can result in serious injury and/or death ***

RIGHT HAND ONLY
Out of stock
Lapua 4PH6050: .260 Rem Cases 100/Box
$154.00 Read more

Lapua LU4PH6050 .260 Rem Cases 100/box

The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
The most precise cases on the market

Lapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
Lapua cases are manufactured to be reloaded, again and again, dozens of times.
Case construction
Base
The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
Body
The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
Neck
Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading.
Out of stock
Tab Gear Shooting Mat: Pollok Shooting Mat w/Buckles
$109.99 Select options This product has multiple variants. The options may be chosen on the product page

A light weight, easily packable mat to keep you off of the dirt, mud, and wet ground. The back of the mat has a urethane water proof coating.
Out of stock
BT65-LW17
$367.60 Read more

The BT65-LW17 CAL (Cant And Loc) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It was developed for shooters that do not desire the Panning feature of the V8 or PSR series of Atlas bipods. The BT65-LW17 has the larger Inner legs, patented 5 leg positions that do not rotate found on the Atlas PSR series, quick change feet and “hold what you move technology.” We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc.” Available in black only.
Out of stock
Armageddon Gear Kit Bags Plus
$134.99 – $174.99 Select options This product has multiple variants. The options may be chosen on the product page

The Armageddon Gear Kit Bags Plus offers a durable and convenient way to carry everything from tools and small equipment to weapons, clothing, and specialized gear.
INV. S1300
$6,157.20 Add to cart
Out of stock
Arken Optics ZULUS HD 5-20R Day/Night Digital With Laser Rangefinder And Ballistic Calculator
$999.00 Read more
Product Details

The ARKEN ZULUS ZHD520R features an integrated Laser Rangefinder and patented ballistic app with a detachable IR illuminator on top of the standard high-definition 1920×1080 Micro-OLED HD display and cutting-edge Sony STARVIS 2 chipset for unparalleled performance in a lightweight, compact, waterproof powerhouse.

Magnification:5-20

Eye Relief:1.77″ (45 mm)

Pixel Resolution:1920 x 1080

Frame Rate:60 Hz

Diopter Adjustment:+ or – 5

IR Illumination Distance:+/- 400 yards

Rangefinding Max Distance:+/- 1000 yrds

Type:Micro – OLED

Battery Type:18650 Flat Top (2x Included)

Operating Time:8 hrs

External Power Supply:5v – Type C USB

Micro SD Card – GB:32 – 128 GB

Degree of Protection:IP67

IR Wavelength:850 nm

Infrared power:5

Working Temperature:- 4 F (-20 C) ~122 F (50 C)

Wi-fi :Enabled

Chip: Sony STARVIS 2

Warranty:2 Year- Limited Warranty
Out of stock
OBi LINK SYSTEM — CLAMP LOCK SHORT BARS
$17.99 Read more

The Clamp Lock Short Bars are used to mount the Clamp Lock to a belt or strap up to 1.5 inches in width.

—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.
Out of stock
OBi LINK SYSTEM — CLAMP LOCK LONG BARS
$17.99 Read more

The Clamp Lock Long Bars are used to mount the Clamp Lock to a belt or strap up to 1.5 inches in width.

—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.
Out of stock
Arken Optics 6-24x50mm FFP VHR MOA EPL4-6240VHR
$525.99 Read more

EPL4

6-24×50 FFP – Illuminated VHR/VPR – Zero Stop – 30mm Tube

The EPL (EP Light) is our LightWeight Hunter version of the EP (Extreme Precision) series. The refined Hunter is built on a streamline 30mm main tube to reduce overall weight with our toolless, easy to operate capped windage turret that lets you set and forget. Our Japanese ELD (Extraordinary Low Dispersion) and VHR (Variable Hunter Reticle) combine to provide astonishing optical performance making this a pleasure for users of all skill levels and disciplines.
Out of stock
FIX IT STICKS Battery Cap Tool
$14.99 Read more

Description

Use our aluminum battery cap tool to change batteries without chewing up the cap. Machined from aluminum with a steel insert for magneting drivers. Works with any standard 1/4″ driver, including Fix It Sticks tools or our T-Way Wrench (not included).
Out of stock
MasterPiece Arms ( MPA ) Magwell Plate: Teeth -for Matrix Pro
$83.99 Read more

This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

The plates can be purchased individually or a complete kit. See the drop down menu for options.

Machined from Solid 6061 aluminum, black anodized, ready to install.

These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

Here is a link to this product upgrade.

If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
Out of stock
MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro
$83.99 Read more

This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

The plates can be purchased individually or a complete kit. See the drop down menu for options.

Machined from Solid 6061 aluminum, black anodized, ready to install.

These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

Here is a link to this product upgrade.

If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
Sale!
OBi LINK SYSTEM – P-A Quick Mount
Original price was: $144.99.Current price is: $108.74. Add to cart

The U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.

*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On-
FIX IT STICKS Small Torque Limiter 30 INCH LBS FISTL30
$54.99 Add to cart
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Out of stock
Hornady 6.5 PRC 143 gr ELD-X® Precision Hunter®
$69.99 Read more

6.5 PRC 143 gr ELD-X^® Precision Hunter^®

Item #81621 | 20/Box

The name says it all! The 6.5 Precision Rifle Cartridge was designed to achieve the highest levels of accuracy, flat trajectory and extended range performance in a sensibly designed compact package.

Utilizing moderate powder charges that result in repeatable accuracy, low recoil and reasonable barrel life, the 6.5 PRC produces high velocities with performance well beyond 1000 yards.

Rifle makers currently chambering the 6.5 PRC include: Axial Precision Rifles, Browning, Bergara, Ruger, Cadex Defence, Christensen Arms, FIERCE Firearms, GA Precision, Gunwerks, Hill Country Rifles, Horizon Firearms, Howa, Krieger Barrels, Mauser, McRee Precision, Montana Rifles, Mossberg, Patriot Valley Arms, PROOF Research, Ruger, Sako, Sauer, Savage Firearms, Sauer, Strasser, Stuteville Precision, Seekins Precision and Trident Armory. Check back often as additional gun manufacturers confirm chambering the 6.5 PRC.