Showing 463–483 of 802 results
Filter-
OBi LINK SYSTEM – Round Plate
$55.99Original price was: $55.99.$41.99Current price is: $41.99. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
OBi LINK SYSTEM – U-Plate ARCA
$18.99Original price was: $18.99.$14.24Current price is: $14.24. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
OBi LINK SYSTEM — GRIP ON
$119.99Original price was: $119.99.$89.99Current price is: $89.99. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
Fix It Sticks CARRYING CASE – XL
$55.00 Add to cartDescription
Version A (All-Purpose Case): Soft carrying case has four molded bit holders that attach to the middle divider. Each bit holder can fit up to twenty four components and bits (ninety-six total). Sewn loops hold a T-Way Wrench, as well as additional components. Magnetic Patch (not included) can attach to the Velcro square on the inside of the case.Version B (3Gun / Long Range Case): Soft carrying case has two molded bit holders that attach to the middle divider. Each bit holder can fit up to twenty four components and bits (forty eight total). Sewn loops hold T-Way Wrench, as well as additional components. Middle panel holds Fix It Sticks Bore Obstruction / Cleaning Rods, Caliber Adapters, Obstruction Tips, and Ball Bearing Handle. Magnetic Patch (not included) can attach to the Velcro square on the inside of the case.
-
Sale! Out of stock
Insite Arms Defiance Ruckus Left Hand 6mm Creedmoor
$6,695.00Original price was: $6,695.00.$6,299.00Current price is: $6,299.00. Read more6mm Creedmoor
Defiance Ruckus Nitrided - LEFT HAND Krieger 1/7.5 MTU 27" Spin Polished Triggertech Diamond MPA Matrix Chassis Black 10/12rnd AICS Mag Heathen Brake 4 Port G2 3/8moa Guarantee
-
Insite Arms LP1 6.5mm Creedmoor
$4,050.00 Read more6.5mm Creedmoor
Mack Bros Evo Stainless Action Cerakote Black Krieger 1/7.5 MTU 26" Spin Polished Triggertech Diamond MDT XRS Chassis BLACK 10/12rnd AICS Mag Heathen Brake 4 Port G2 3/8moa Guarantee with Target
-
Bix’n Andy TacSport Trigger Shoe Bix’n Andy Wide – Smooth
$49.99 Add to cartThe shooters asked and Bix’n Andy answered!
These exchangeable trigger shoes are for shooters that want to customize their trigger experience. Four different styles to choose from and they’re easy to swap out.
The Smooth Curved Shoe is what the Bix’n Andy Benchrest triggers use. It is wider than the original TacSport shoe and is an absolute favorite among shooters around the world.
The Gator Grip is the same width as the Competition shoe, but has a very appealing gator traction machined into the aluminum trigger shoe. This traction is very satisfying to the touch and provides an extra sense of touch when utilizing a light trigger pull weight in a tactical competition or cold hunting conditions.
Hunters around the world have come to enjoy a ribbed trigger shoe. This smooth, wide shoe has 3 grooved ribs machined into the surface that offers a nice sense of finger location on the trigger.
Finally, the 90º shoe is a wide and straight shoe that tactical shooters have come to love in many competition shooting disciplines. This shoe is vertical in relation to the rifle receiver and has a nice hook on the bottom to offer better finger orientation on the shoe.
-
Hornady LOCK-N-LOAD OAL GAUGE
$60.00 Add to cartThe Lock-N-Load® O.A.L. Gauge is universally acclaimed as the most accurate, easy-to-use and reliable method of regulating seating depth and the resulting “jump” to the rifling. conditions.
Made In United States of America
-
Peterson 6XC Brass Cases ( 50ct ) SRP
$98.99 Add to cartDavid Tubb, owner of Superior Shooting Systems originally conceived and designed the caliber 6 XC. Tubb has won almost 30 different rifle championships and has proved to the world that the 6 XC is a highly effective, flat shooting caliber.
More than a year ago Tubb contacted Peterson Cartridge and asked if the team at Peterson could develop a tool pack to make 6 XCs. After months of tooling development and experimentation Peterson produced its first run. According to Derek Peterson the company’s president and head tooling designer, “Lots of shooters purchased these 6 XCs, shot them and complimented them highly.”
But Tubb reached out to Peterson to say he wasn’t happy with them. He wanted more internal volume. So Peterson went back to work and redesigned the tool pack. After more months of tooling revisions and experimentation Peterson produced its second iteration of 6 XCs.
David shot those second-iteration casings and reported to Derek, “Ok, you achieved the original goals I asked for, and these are every bit as good as those made by the European incumbent. But here’s the thing. Their casings are known to have soft heads that don’t hold up well to numerous reloads. Can you make a third iteration that has harder heads? Oh … and can you make a version in small rifle primer size also?”
So Derek went back to work and produced a third version that closely matches the internal volume of the European cases but with much harder heads. After shooting these, David declared them to be the best 6 XCs out there. This is the version Peterson produces today, in both large and small rifle primer size.
Peterson concluded, “Give them a try, and see if you agree.”
Additional Information
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
-
Hawkins Precision Ultra-Light Tactical Scope Rings 35mm High 0.885″ Height
$209.00 Read moreUltra-Light Tactical Scope Rings
Ultra-light tactical scope rings from Hawkins Precision are made in the USA out of billet 6061 T6 aluminum. These fully machined rings are robust and feature a corrosion-resistant black anodized finish. Machined with a clamp and recoil lug made from 7075 aluminum, these scope rings deliver extra strength and grip. The ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm, 34mm and 35mm, sized in low, medium, and high. Rings can be ordered with a center anti-cant level, or an offset level.
Torque Specs: 25 in-lbs ring caps / 65 in-lbs cross bolts
size Measurement from Picatinny Rail to optical center30mm 34mm 35mm Application low .885″ * * 50mm objective with standard barrel contours medium 1.0″ * * 56mm objective with standard barrel contours high 1.25″ * * 50mm objective with AR style front forend X high 1.375″ * 56mm objective with AR style front forend -
Hawkins Precision Ultra-Light Tactical Scope Rings 34mm Low 0.885″ Height
$209.00 Read moreUltra-Light Tactical Scope Rings
Ultra-light tactical scope rings from Hawkins Precision are made in the USA out of billet 6061 T6 aluminum. These fully machined rings are robust and feature a corrosion-resistant black anodized finish. Machined with a clamp and recoil lug made from 7075 aluminum, these scope rings deliver extra strength and grip. The ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm, 34mm and 35mm, sized in low, medium, and high. Rings can be ordered with a center anti-cant level, or an offset level.
Torque Specs: 25 in-lbs ring caps / 65 in-lbs cross bolts
size Measurement from Picatinny Rail to optical center30mm 34mm 35mm Application low .885″ * * 50mm objective with standard barrel contours medium 1.0″ * * 56mm objective with standard barrel contours high 1.25″ * * 50mm objective with AR style front forend X high 1.375″ * 56mm objective with AR style front forend -
DELTA – STRYKER HD 4.5-30X56MM FFP – .1MIL – LRD-1P
$2,275.00 Read morePerfect riflescope with a reticle in the first focal plane for precise shooting at medium and long distances Optical design comprising of carefully selected ED glass provides excellent image quality and impressive light transmission, special anti-reflective coatings and illuminated central target point allow to fire an accurate shot even in low light conditions. Sleek and robust 34 mm tube provides with large range of reticle vertical adjustement reaching 300 cm. Open turrets are equipped with a ZeroLock mechanism which allows to set limit for elevation – usually after zeroing the riflescope at preferred shooting distance. The lock allows to make corrections only in elevation and prevents lowering the point of impact below the user-defined limit. Despite these advanced functionalities the rfilescope weighs only 1014 g and its length does not exceed 365 mm.
Reticles have been designed specifically to work in the first focal plane (FFP), maintaining permanent dimensions throughout the whole zoom range. Reticles LRD-1P, LRD-1T and DLR-1 are truly unique and dedicated to any and all ambitious shooters. These are milliradians reticles (MIL) and so any corrections can be applied using metric units (1 Mil = 100 mm @ 100 m). Reticles correspond with the click of the scope – 1-click equals 0.1 MIL (10 mm). All three reticles provide with maximum comfort of use and accuracy of the shot with proven great functionality throughout the whole zoom range (4.5-30x). One-of-a-kind design of the reticles allows for measuring the distance to an object of known size, as well as elevation and windage correction. The vertical adjustment range of each reticle reaches 300 cm, facilitating shots of any caliber, even at very long distances.
LRD-1P reticle
The center of the reticle is an illuminated 0.045 Mil target point with surrounding, well lighted markings that form the cross.Click Adjustments: 0.1 Mil-Radian
Max Adjustment Range: 30 Mils Elevation, 15 Mils Windage
Tube Diameter: 34mm
Parallax Adjustment: Side Focus (23m – Infinite)
Turrets: ZeroLock
Reticle Position: First Focal Plane
Illuminated Reticle: Yes
Linear Field of View @ 1000m: 8.3 – 1.2 m
Exit Pupil: 8.8 – 1.9 mm
Eye Relief: 81 – 97 mm
Weight: 1014 g
Length: 400 mm
Nitrogen filling: Yes
-
SPUHR MOUNT SCP-4001A Ø34 H30MM 0MIL PIC
$334.00 Read moreArticle no.: HP30-25A
Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz -
SPUHR MOUNT SCP-3000A Ø30 H30MM 0MIL PIC
$334.00 Read moreArticle no.: HP30-25A
Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz -
SPUHR MOUNT HP30-25A PICATINNY AESTHETIC RINGS Ø30 H25.4/1″
$264.99 Add to cartArticle no.: HP30-25A
Aesthetic hunting rings for 30 mm tube on Picatinny and Weaver bases/rails. Features two classic top covers. Height: 25.4 mm/1″ Weight: 100 gram/3.5 oz -
Sale! Out of stock
NightForce Angle Degree Indicator (ADI) RH w/ Mount-A121
$318.00Original price was: $318.00.$289.00Current price is: $289.00. Read moreThe Nightforce Angle Degree Indicator takes the guesswork out of uphill and downhill shots. Calibrated in degrees, it gives you an instant readout which you can enter directly into the Nightforce ballistic software program on your pocket PC or use with a pre-printed angle drop chart.
-
Eley Match .22lr Ammunition
$229.99 Read moreSold in boxes of 500 rounds (1 Brick)
key features
- Patented flat nose technology
- Cut case for consistent ballistic perfomance
- Excellent competition round
designed for
- Professional and elite shooters
used for
- 50m Prone
- 50m 3 Positions
- 50m Free Pistol
- Benchrest
firearm
- .22LR Match Rifle
- .22LR Free Pistol
technical information
specifications
bullet profile
Flat nose
cartridge length
25.4mm / 1inch
bullet weight
2.59grams / 40grains
velocity
Muzzle : 331m/s (1085ft/s)
50m (55yds) : 303m/s (994ft/s)
91m (100yds) : 285m/s (935ft/s)
energy
Muzzle = 14.5 (Kg.m) / 104.9 (ft.lb)
50m / 55yds = 12.1 (Kg.m) / 87.5 (ft.lb)
91m / 100yds = 10.7 (Kg.m) / 77.4 (ft.lb)
-
MasterPiece Arms BA Comp Chassis – MPA Tikka Inlet – Short Action AICS Mag – Tungsten – RH
$1,397.00 Add to cart- This chassis will fit Tikka Actions Only
-
MasterPiece Arms ( MPA ) Mag Block Insert
$14.00 Add to cartMag Block Insert
This insert is designed to fit into the mag catch slot in Short Action MPA BA, BA Comp & Hybrid Chassis. This part was originally designed to work with Curtis Custom Vector Actions, for customers who wanted to run AICS magazines (on an AW Cut Action), to eliminate the gap before the AICS mags make contact with the action. However, we have also found these very useful for eliminating feeding issues when a competition shooter is putting weight or pressure on either the bottom or front of their magazine, such as when shooting from a barricade.
When installing these, after you have verified fit and tested with a magazine, we recommend that you remove the insert and place some adhesive to the top flat surface to make contact with the top of the pocket in the mag slot in the chassis. Superglue or similar is recommended.
Slight polishing may be required for proper fit. You will receive (1) Version 1 and (1) Version 2 inserts with each order. Please watch the video below for installation instructions.
-
Redding – Heat-Treated Steel Neck Sizing Bushing 0.336″
$28.99 Add to cartRedding – Heat-Treated Steel Neck Sizing Bushing
Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2” O.D. X 3/8” long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001” size increments throughout the range of 185” thru .368”, Covering all calibers from .17 to .338 and clearly marked with size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.