-
BT46-NC PSR Atlas Bipod: Standard height
$391.40 Add to cartBT46-NC PSR Atlas Bipod: Standard height No Clamp
The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.
It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.
The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 5 – 9.4″ (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5″ diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11″
-
Gray Ops Ckye-Pod Clamp Adapter
$58.99 Add to cartPURPOSE:
- Replaces Ckye-Pod clamp making it universal to all Atlas compatible clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard black anodizing
- Includes shorter brass tipped panning set screw
- Adds 0.3125” in height
- Hole machined on bottom to accept the “pan-lock” some versions of Cyke Pod have
Installation:
- Remove existing clamp by loosening set screw on back of bipod
- Pull the clamp off the bipod and save the pull stud and wave washer
- Install the wave washer and pull stud into adapter
- Re-install adapter onto bipod by tightening the set screw on the bipod
- Make sure not to overtighten the pan-lock brass tipped set screw (very minimal pressure needed)
- Install Atlas compatible arca clamp
-
Rangefinder Extension Adapter GRAY OPS CNC
$94.99 Read moreNOTES:
Designed for rangefinders/optics without the anti-rotate pin
This product requires a 4-side dovetail adapter to be ARCA mounted. Can still be mounted to non-arca tripods via ¼-20 threaded hole in bottom
Some pictures shown with optional adapterPURPOSE:
Allows 3” of extra optic/accessory travel
Moves optic closer to edges of AMP PlatesFEATURES:
Machined from 6061 Aluminum
Type II Black Anodizing
Includes sliding ¼-20 captive screw
Extra ¼-20 threaded hole in bottom for different attachment methods -
5-H Atlas Bipod BT35-LW17
$681.00 Read more- Mounts directly to any 1913 style Picatinny rail via included CUSTOM ADM Lever.
- Height Range approximately 5.5 – 10.5″
- 15 degrees +/- of preloaded Pan.
- 15 degrees +/- of preloaded Cant.
- 5-H Pan and Cant can be locked out at top dead center
- PAN and CANT Tension Wheel has Detent adjustability and Cam-Lock
- PATENTED multiple deployable leg positions of 0, 45, 90, 135 and 180
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight 27.2 ounces.
- Footprint spread 14.5″– 19.5″
- Available in black only
- Made in America
-
Sale! Out of stock
OBi LINK SYSTEM — CLAMP LOCK WITH TEK-LOK
Original price was: $79.99.$63.99Current price is: $63.99. Read moreThe Clamp Lock with TEK-LOK attaches to your backpack or belt strap. Once mounted to your backpack or belt, you can connect any round or square posts.
—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-
*CLAMP LOCK with TEK-LOK*
-Attaches to belt or 1.5-inch strap
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
-
Gray Ops CNC – Brass Magneto Speed V3 Mount (Without ARCA Clamp)
$289.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
NOTE: This product does not come with the ARCA Clamp, for the mount with the clamp, please see Brass Magneto Speed V3 Mount With Clamp.
-
Gray Ops Spuhr Ring Turret Guards
$189.99 Add to cart     ***Only compatible with Spuhr Rings***
PURPOSE
- Added protection for your scope turrets
- Prevents ârolling a turretâ during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to âloadâ into
-
BT10-LW17 V8 Atlas Bipod
$398.00 Read more- Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
- Height Range approximately 4.75 – 9.0″.
- 15 degrees +/- of preloaded Pan.
- 15 degrees +/- of preloaded Cant.
- Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
- Weight 12.7 ounces.
- Footprint spread 8″– 11″
- Available in black only
- Made in America
-
Sale!
OBi LINK SYSTEM — ROUND POST M-LOK Mini
Original price was: $55.99.$41.99Current price is: $41.99. Add to cartThe OBi Link System Round Post M-lok Mini is a smaller version of the regular-sized RPM. This mini M-Lok Post mounts to the M-lok slot on the forend of your rifle stock or any other piece of gear with an M-lok slot or similar hole spacing.
Once it is attached to your rifle or other equipment, it can connect to the Clamp Lock, Slide Lock, or Grip On Round.
-
Atlas 5-H & Super CAL BAS Ski Feet BT66
$134.90 Add to cartThe BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5″ 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.
Weight: 6.16 ounces
-
ATLAS BT22: Leg Extensions
$80.90 Read moreBT22: Atlas Leg Extensions
The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369
Weight: 1.8 ounces
Product will work on V8, PSR and CAL models only.
-
Gray Ops Harris BiPod ARCA Clamp Adapter
$178.99 Read morePURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Atlas BT19 Accuracy International Spigot
$109.99 Read moreThe BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism. The BT19 is constructed from 6061T6 Aluminum with a type II hard coat anodize mated with an alloy steel Spigot that is finished with a Manganese Phosphate.
The evolution of long range shooting and shooter’s demand drove subtle changes to the BT19. The latest modification stops the 3 to 9 rotation. Available in black only.
Weight: 4.7 ounces
-
Sale!
OBi LINK SYSTEM — GRIP ON SQUARE
Original price was: $159.99.$119.99Current price is: $119.99. Add to cartThe Grip On Square is excellent for connecting tripods and water bottles to your backpack or belt. Most Commonly used on the leg of a tripod to attach a camera or pair of binoculars. The square post is anti-rotation keeping your gear in a safe, easy-to-access position. The Grip On Square comes standard with a Square Plate, which mounts in any direction. The Grip On Square also comes with a 9-inch strap and will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach. Attach the Grip On Square by loosening the strap until it fits around the gear, pull the strap snugly, then tighten the Allen bolt to the desired tension.
*GRIP ON Square*
-Fits Tripod-
-Fits Water Bottle-
-Fits Cup-
-Connects to Lock Family-
-Connects to Grip On Family- -
OBi LINK SYSTEM — ROUND POST MPA MATRIX PRO
$54.99 Read moreThe Round Post Matrix Pro or RPM mounts to the M-lok slot on the forend of your MPA Matrix Pro rifle stock or any other piece of gear with an M-lok slot or similar hole spacing. Once it is attached to your rifle or other equipment, it connects to any of the Lock or Grip On families.
*RP M*
-Mounts to MPA Matrix Pro forend and gives enough clearance for the wide body-
-Mounts to M-lok rail.-
-M-lok hardware is included. –
-Connects to Lock family-
-Connects to Grip On family-*CLAMP LOCK with TEK-LOK*
-Attaches to belt or 1.5-inch strap
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
-
ATLAS BT73: M-LOK® Rail
$47.18 Read moreThe BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.
Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.
- Length: 1.575″
- Width: 0.835″
- Weight: 0.59 oz
For a direct M-LOK® to “NC” (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter
-
ATLAS BT20-B: Atlas Accuracy International Spigot Bottom Rail
$40.39 Read moreThe BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod.
It is the same rail found on our BT21 TRG Bracket, BT43 Leveraged Rail and BT20-B/ARCALOCK Clamp. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept any rail mounted bipod.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Length: 1.60″
- Weight: 0.57 ounces
-
ATLAS BT49: 2.05″ 1913 Adjustable Picatinny Rail
$40.39 Read moreThe BT49 – 2.05″ 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 – 1.6″ with a 1.00″ radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks.
The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Length: 2.05″
- Weight: 0.4 ounces
-
Gray Ops Mag-Cut Mini Plate
$214.99 Read moreIntroducing the Gray Ops Mag-Cut Mini Plate, a precision tool designed for increased stability and balance when shooting from Accuracy International / J-Allen Style / similar chassis.
-
Sale!
Thumb-Rest / Thumb-Rail MPA Chassis GRAY OPS CNC
Original price was: $126.99.$99.00Current price is: $99.00. Add to cartPurposes
Enhanced grip/comfort for barricade style positional shooting
Compatable with MPA BA Chassis 4 hole or older 6 hole NV bridge chassisFeatures
Machined from 6061 Aluminum and Hardcoat Black Anodized
Ergonomic comfortable cutouts
Machined for perfect fit to blend into chassis contours
Barricade Rail utilizes existing screws from factory picatinny rail
Thumb rest utilized 4 supplied T-15 torx screws
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart