-
Short Action Precision ( SAP ) Two Round .223 Holder
$16.99 Select options This product has multiple variants. The options may be chosen on the product pageHold an extra two .223 / 5.56 rounds right where you need them in a pinch with the SAP .223 Two Rounder! This two round holder attaches with Velcro to side of rifle near ejection port. This little guy has saved my bacon on that one last shot more times than I can remember! This is great for hunting and trainer rifles!
Don’t know which Two Rounder for your round?
Measure the case and compare to the specs here.Designed for .223 / 5.56 cartridges
Other cartridges just measure case OD
Based on a Case OD of .376″ / 9.55mm
Will take cartridges .3.40″ / 8.63mm up to .440″ / 11.18 mmCheck out what some people are saying about the Two Rounder!
-
Armageddon Gear 10-round Adjustable AICS/AW Mag Pouch
$64.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Armageddon Gear 10-Round Adjustable AICS/AW Mag Pouch securely holds your rifle magazine on either PALS webbing or any belt up to 2 inches in width.
-
Short Action Precision ( SAP ) Two Round MAGNUM Holder
$16.99 Select options This product has multiple variants. The options may be chosen on the product pageNEW Magnum cartridge size! Hold an extra two rounds right where you need them in a pinch with the SAP Magnum Two Rounder! This two round holder attaches with Velcro to side of rifle near ejection port. This little guy has saved my bacon on that one last shot more times than I can remember!
Don’t know which Two Rounder for your round?
Measure the case and compare to the specs here.
Important! You must clean the stock with a good quality rubbing alcohol (91% preferred) and let that dry completely to prepare the surface for proper adhesion of the supplied industrial strength Velcro piece!
- Fits 6.5 SAUM, 7 SAUM, .338 Lapua, and most Mag/Ultramag cartridges
- Other cartridges just measure case OD
- Will take cartridges .550″ / 14mm up to .80″ / 20mm
- Based on a Case OD of .587″ / 14.91mm
-
Silent Ammo Carrier TAB Gear
$69.99 Select options This product has multiple variants. The options may be chosen on the product pageThe TAB GEAR SAC addresses the issues that you have to deal with when carrying a lot of ammo.
The SAC will hold 100 rounds of .308 ammo. It also has ammo loops on the outside that will hold 10 rounds for quick access. There is a divider inside that allows the shooter to easily segregate live rounds from fired brass.
It is very easy to store fired brass, no more trying to insert them back into shell loops or throwing them into a pack pouch to dig out later. Simply throw the empty brass into the inside compartment of the SAC and they are ready to dump out later.1000 Denier Cordura available in Coyote Brown, OD Green, MultiCam, Krpytek Highlander, Black
Shell loops on the outside to hold 10 rounds for quick access
PALS webbing on the back for multiple mounting options
Divider inside to separate live rounds from fired brass
Heavy duty #10 zipper with 550 cord pull
Bar tacks at critical wear areas for added strength
Double stitched binding around edges for added strength
No more having ammo rattle in boxes as you move
Empty bag weighs 4.5 ounces, full with 100 rounds of .308 175 SMK rounds is right at 6 pounds -
Sale!
Armageddon Gear 40/40 Ammo Holder
Price range: $89.00 through $98.00 Select options This product has multiple variants. The options may be chosen on the product pageThe 40/40 Ammo Holder finally provides a secure and quiet way to tote enough ammo for a day of match shooting in all conditions.
-
Sale!
OBi LINK SYSTEM — CLAMP LOCK WITH TEK-LOK
Original price was: $87.99.$52.79Current price is: $52.79. Add to cartThe Clamp Lock with TEK-LOK attaches to your backpack or belt strap. Once mounted to your backpack or belt, you can connect any round or square posts.
—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-
*CLAMP LOCK with TEK-LOK*
-Attaches to belt or 1.5-inch strap
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
-
Sale!
OBi LINK SYSTEM — GRIP ON
Original price was: $119.99.$71.99Current price is: $71.99. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
Sale!
OBi LINK SYSTEM – P-A Quick Mount
Original price was: $144.99.$86.99Current price is: $86.99. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
Sale!
OBi LINK SYSTEM – U-Plate – Black
Original price was: $18.99.$11.39Current price is: $11.39. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
Sale!
OBi LINK SYSTEM – U-Plate ARCA – Black
Original price was: $18.99.$11.39Current price is: $11.39. Add to cartThe U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.
*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On- -
Sale!
OBi LINK SYSTEM – Round Plate
Original price was: $55.99.$33.59Current price is: $33.59. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
Sale!
OBi LINK SYSTEM – MOCCASINS (TRIPOD FEET) 3/8-16 (RRS and Leofoto)
Original price was: $104.99.$62.99Current price is: $62.99. Add to cartThe Obi Moccasins are the perfect addition to your precision tripod. They’ve got the right amount of aggression and ample surface area to keep you stable in all condiitons. They dig in hard and don’t sink or slip in the sand/mud/dirt. ANd they don’t add too much height or weight to your tripod.
The Moccasins come as a set of 3 and are threaded for either 16-2 metric (Feisol) or 3/8-16 (RRS). They feature a tension washer that keeps them securely fastened – because nobody wants things unscrewing when you don’t want them too!
-
Sale!
WCD Ammo Carrier – Walsh Custom Defence 120 Round – PURCHASE 3 CARRIERS – 40% OFF REG PRICE
Original price was: $449.97.$269.98Current price is: $269.98. Select options This product has multiple variants. The options may be chosen on the product pageIntroducing the Walsh Custom Defense Ammo Carrier !!! Gone are the days of toting around bulky bullet boxes and digging through your pack for ammo. Our low profile and compact ammo carrier securely holds up to 120 rounds of Short Action ammunition 223 SIZE and can easily fit in a pack. Inside, 4 rigid panels house 120 elastic bullet loops in rows of 10. Located directly below each row of bullet loops, a pocket is provided to protect the tips of your bullets from being damaged. Each carrier is fitted with a nylon carry strap along the top edge, along with Velcro closure. A morale patch loop area is provided on the lower front panel.
Each carrier is handcrafted in the USA using only the highest quality Milspec materials. Genuine Cordura 1000D fabric is used for the body of the carrier to ensure durabilty, while heavy duty nylon thread is used to ensure stitch strength. Satisfaction Guaranteed !!!
Closed size: 7.5”x 11” x 2.75” fully loaded
Weight empty: 1 lb. 9 oz.
-
Sale!
OBi LINK SYSTEM — Square Plate
Original price was: $55.99.$33.59Current price is: $33.59. Add to cartThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
Sale!
OBi LINK SYSTEM — CAMERA LOCK
Original price was: $69.99.$41.99Current price is: $41.99. Add to cartThe OBi Link System Camera Lock works excellent for Cameras, Spotting Scopes, and Binoculars, as well as mounting to the wall to help organize your gear. It mounts using a 1/4-20 bolt and has arca built into the plastic, allowing you to clamp it into your tripod and hang it from your backpack strap.
NOTE: You will need at least one Round Post M-Lok, Quick Detach Post, or Anywhere Post for a complete system.
-
Sale!
WCD Ammo Carrier – Walsh Custom Defence 120 Round – PURCHASE 2 CARRIERS – 20% OFF REG PRICE
Original price was: $299.98.$239.98Current price is: $239.98. Select options This product has multiple variants. The options may be chosen on the product pageIntroducing the Walsh Custom Defense Ammo Carrier !!! Gone are the days of toting around bulky bullet boxes and digging through your pack for ammo. Our low profile and compact ammo carrier securely holds up to 120 rounds of Short Action ammunition 223 SIZE and can easily fit in a pack. Inside, 4 rigid panels house 120 elastic bullet loops in rows of 10. Located directly below each row of bullet loops, a pocket is provided to protect the tips of your bullets from being damaged. Each carrier is fitted with a nylon carry strap along the top edge, along with Velcro closure. A morale patch loop area is provided on the lower front panel.
Each carrier is handcrafted in the USA using only the highest quality Milspec materials. Genuine Cordura 1000D fabric is used for the body of the carrier to ensure durabilty, while heavy duty nylon thread is used to ensure stitch strength. Satisfaction Guaranteed !!!
Closed size: 7.5”x 11” x 2.75” fully loaded
Weight empty: 1 lb. 9 oz.
-
Tab Gear Simple Pouch Locking Zipper
$38.99 Select options This product has multiple variants. The options may be chosen on the product pageKeep your dope at hand with the A3 Armband.
Simple construction allows comfortable use and minimal bulk. Dual adjustable elastic bands keep the A3 exactly where you want it.
Velcro allows the cards to be easily changed.
FEATURES :
- Dual adjustable elastic armbands
- 2″ Loop Velcro allows attachment of dope cards
- Includes 2 cards with velcro backing
- Integrated Pen Loop
- Made in Texas with US made materials!
- Lifetime Warranty
SPECS :
- 7″ x 4″ x 2″
- 2.25oz empty
-
WCD Ball Head Hood: Walsh Custom Defence
$34.99 Add to cartThe WCD Ball Head Hood was designed to protect your tripods ball head from rain, dust and grime to keep it functioning smoothly. It also can double as a utility pouch. Made by hand with Nylon Hyper D 300 Diamond Ripstop fabric which is 100% waterproof. It has a cinch closure system containing shock cord and cord lock. It also comes with a short paracord loop on one side to attach to a tether of your choice. Available in Olive Green and fits most popular ball heads.
-
Sale!
OBi DIE STAX SYSTEM — STAX DROP
Original price was: $27.49.$12.37Current price is: $12.37. Add to cartOBi Die Stax System is an organization system made to keep your reloading room clean and organized.
OBi Stax Drop is used as a support when you want to rest the Die Stax on a countertop. It supports the front side of the Stax Blocks. The Stax Drop uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with more Stax Blocks or other Stax Drops.
—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.
—-NOTE—- When resting on the countertop you will need at least one Stax Drop.
*STAX DROP*
-Supports the front of the Die Stax
-Attaches the Stax Bushing to other Stax Blocks
-Compatible with all other Stax products
-
Sale!
OBi DIE STAX SYSTEM — STAX BUSHING
Original price was: $38.49.$17.32Current price is: $17.32. Add to cartOBi Die Stax System is an organization system made to keep your reloading room clean and organized.
OBi Stax Bushing organizes up to 2 neck bushings, 1 expander ball and up to 2 allen wrenches or decap pins. The Stax Bushing uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with any Stax Blocks or Stax Drops.
—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.
—-NOTE—- When resting on the countertop you will need at least one Stax Drop.
*STAX BLOCK 10*
-Organizes 2 neck bushings
-organizes 1 expander ball
-Organizes up to 2 allen wrenches or decap pins
-Compatible with all other Stax products
-
Sale!
OBi DIE STAX SYSTEM — STAX BLOCK 5
Original price was: $98.99.$44.55Current price is: $44.55. Add to cartOBi Die Stax System is an organization system made to keep your reloading room clean and organized.
OBi Stax Block 5 organizes 5 reloading dies and a combination of up to 10 allen wrenches or decap pins. The Stax Block 10 uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with more Stax Blocks or Stax Drops.
—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.
—-NOTE—- When resting on the countertop you will need at least one Stax Drop.
*STAX BLOCK 5*
-Organizes 5 dies
-Organizes up to 10 allen wrenches or decap pins
-Compatible with all other Stax products
Shopping Cart