Showing 64–84 of 273 resultsSorted by popularity
Filter-
Armageddon Gear 40/40 Ammo Holder
$89.00 – $98.00Price range: $89.00 through $98.00 Select options This product has multiple variants. The options may be chosen on the product pageThe 40/40 Ammo Holder finally provides a secure and quiet way to tote enough ammo for a day of match shooting in all conditions.
-
Sale!
Out of stock
Gray Ops CNC MasterPiece Arms Matrix & Matrix Pro Side Rail Weights – Steel
$189.00Original price was: $189.00.$132.30Current price is: $132.30. Read morePURPOSE
- Give the perfect balance point to your MPA BA Comp/Matrix/ESR Chassis when combined with the MPA Competition Side Rails
- Added weight Reduces recoil and adds stability
- Added locations for hand gripping
FEATURES
- Machined from 1018 cold rolled steel
- Black Nitride finish for superior corrosion and rust resistance
- Includes 4 weights (two weights per side)
- Each weight has 3 built in flush cup locations (12 total per kit) for each sling and accessory attachment
- Adds 27.4 ounces per 4 weight kit
- BA Comp Kit Dimensions roughly 0.6 x 0.6 x 5.25”
- Matrix/ESR/Matrix PRO Kit Dimensions roughly 0.5 x 0.6 x 6”
- Hardware to attach to side rails included
NOTE
- Side rails (shown in picture) purchased separately from MPA website must be installed to utilize these weights
-
Gray Ops 4-Way Dovetail Mount Standard
$55.00Original price was: $55.00.$38.50Current price is: $38.50. Add to cart- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined with cork insert to keep optics/accessories secure from loosening
- Includes ¼-20 screw
-
Morale Patches
$5.99 Select options This product has multiple variants. The options may be chosen on the product pagePersonalize your kit with Maxpedition morale patches, featuring original artwork executed with the utmost attention to detail. All patches are backed with hook velcro for attachment to loop velcro areas on bags, packs or outerwear.
-
ThorroClean Bore Cleaning System – 118ml Bottles BULK 5-PACK
$179.99Original price was: $179.99.$139.99Current price is: $139.99. Add to cartBullet Central teamed up with Iosso Products to develop a breakthrough bore-cleaning product. ThorroClean Bore Cleaning System provides a quick and thorough cleaning of the rifle bore. It completely removes copper and carbon fouling quickly, without any wait time and difficult cleanup. The active ingredients are gentle on a barrel and should be used in the same cycle as you would your regular cleaning regimen. Included: ThorroClean Bore Cleaner ThorroClean Bore Flush Description You can develop your own cleaning method but we know that the following works. You should have a well designed and made bore guide. It also helps the cleaning process if you have a solvent port as it is easier to administer ThorroClean.
Step 1 Push a wet tight patch through your bore to push the excess of carbon lying in the barrel. This gets rid of the loose fouling in the barrel.
Step 2 Liberally introduce some ThorroClean (about a teaspoon full) to a good bore brush. Stroke the barrel forward out through the crown and back about 10 to 15 times. Check to see if you have enough ThoroClean on your brush.
Step 3 Push a dry patch through the barrel and follow that up with patches liberally doused in ThorroFlush. You should be able to clean all the ThorroClean out of the barrel with 2 or 3 patches. Make sure that you do not have excess ThorroClean in your solvent port Check it out with your borescope.
-
Sale!
Out of stock
OBi LINK SYSTEM — GRIP ON ROUND
$159.99Original price was: $159.99.$95.99Current price is: $95.99. Read moreThe OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
-
ATLAS BT15: 3.35″ 1913 Picatinny Rail
$47.10 Read moreThe BT15 – 3.35″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78″ and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).
A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.
Weight: 0.92 ounces
-
Sale!
Out of stock
Gray Ops CNC – Billet Slider – .22 Ammo Case 50 rnds
$229.00Original price was: $229.00.$189.00Current price is: $189.00. Select options This product has multiple variants. The options may be chosen on the product pageDiscover the Gray Ops CNC Billet Slider – .22 Ammo Case, your ultimate solution for carrying and accessing 22LR ammo with unparalleled ease. Safely store and conveniently access your rounds using factory 50 ct. plastic sleeves or compatible sleeves from various brands.
-
22 Long Rifle Pelican Case GRAY OPS CNC
$94.99 – $98.99Price range: $94.99 through $98.99 Select options This product has multiple variants. The options may be chosen on the product pagePURPOSES
Keep ammo safe and secure
Waterproof, dustproof, and shockproof caseFEATURES
Machined from 6061 Aluminum and Type II Anodized
Holds 80 round of 22 LR ammo
Hole spacing lines up with most 22LR box ammo for quick loading
Clear acrylic slider to secure ammo and dump 10 round rows while holding the rest in place
Compact
Machined insert has a precise squeeze fitment into Pelican case
Small space underneath insert for storage -
Sale!
Out of stock
Gray Ops Hybrid M-Lok Weight
$99.00Original price was: $99.00.$69.30Current price is: $69.30. Read moreGet the most customizable balance with the HYBRID M-LOK weights. Designed for all M-Lok configurations using 3 or more M-LOK slots.
FEATURES
- Hard Black Anodize finish
- Integral Flush cup
- 2 exterior M-LOK accessory slots per weight (ie. pic rails, thumbrests)
- Recoil reducing serrated grips along the bottom of each weight that provide an added friction surface
- Shaped to be support hand friendly during push/pull/press positional shooting
- Brass Pair – adds 1.1 pounds (16.8 oz.)
- Aluminum Pair – adds 0.52 pounds (8.32 oz.)
- Dimensions – 4.674″ x 0.52″ x 1.228″ (Covers 3 M-Lok slots)
- Sold in pairs
- All M-Lok Hardware included
Available with hardware compatible with MPA Matrix and ESR Internal weights
Not compatible with MPA Side Rails, MPA Matrix Pro Chassis, or MPA BA Comp Chassis
-
Gray Ops 4-Way Dovetail Mount Anti-Rotate
$64.99Original price was: $64.99.$45.49Current price is: $45.49. Add to cartNOTES:
This product has an Anti-Rotate Pin (PLEASE MAKE SURE your accessory has an opening for it
PURPOSE:
Attach to bottom of scopes, binoculars, or anything with ¼-20 threads
FEATURES:
Machined from 6061 Aluminum
Type II Black Anodizing
4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
Universal design for use with any Arca clamp
Extra ¼-20 in bottom for attaching to non-arca tripods
Low profile design -
Sale!
Out of stock
Armageddon Gear Python Adjustable Support Bag
$84.99Original price was: $84.99.$58.99Current price is: $58.99. Select options This product has multiple variants. The options may be chosen on the product pageThe Armageddon Gear Python Adjustable Support Bag might be the most reliable shooting support bag on the market. Designed by Shannon “The Python” Kay of K&M Precision Rifle Training, this may be the ultimate one-bag 90% solution.
-
Armageddon Gear GARMIN XERO C1 PRO CASE –
$119.99Original price was: $119.99.$89.00Current price is: $89.00. Select options This product has multiple variants. The options may be chosen on the product pageThe Garmin Xero C1 Pro has quickly become a critical piece of equipment. Keeps yours protected and close at hand with the new Armageddon Gear Garmin Xero Case. The Garmin Xero Case is basically a hard case sewn into 500d corudra nylon. The Case have over an inch of open cell foam padding, laminated to air mesh to keep the unit securely in place and protected, like in the chubby little hands of baby angels. As all of our products the Garmin Xero Case is made in America and guaranteed for life. Available in ranger green and black/grey.
-
Tab Gear Sling Thing
$18.99 Select options This product has multiple variants. The options may be chosen on the product pageHow many times have you needed to zero your scope turrets, and either didn’t have or couldn’t find, the wrenches handy to do the job? If you shoot a scoped rifle chances are you’ve been in this situation before, probably several times.
If you have an illuminated reticle have you ever tried to turn it on only to find that the battery is dead? Maybe it’s been in a while and you figure it’s about time to change it out, but you can’t remember where you stashed the spare battery.
We’ve come out with a handy little item to take care of both of those troublesome situations so you won’t have to worry about either of them any more.
There is room for four Allen / Torx wrenches in the two slot pockets and a pocket to hold your illuminated reticle battery. The elastic on the back of the Sling Thing allows you to thread it onto your sling anywhere and the Sling Thing is always there yet out of the way, until you need your tools or battery. The Sling Thing closes securely with Velcro.
We are offering the Sling Thing in our three main colors, Coyote Brown, OD Green, and Black.
Features:
- Room for four Allen / Torx wrenches in the two slot pockets
- Pocket to hold your illuminated reticle battery
- Elastic backing to thread onto your sling anywhere
- Velcro adjustment to keep closed securely
- Always there yet out of the way until needed
-
Sale!
Out of stock
Gray Ops MPA BA Thumbrest
$79.00Original price was: $79.00.$55.30Current price is: $55.30. Read moreMade specifically for the MPA BA Competition chassis.
- Multiple mounting locations in any of the “Oval” slots down the forend
- Compatible with or without MPA Internal Weights
- Made from 6061 Aluminum and hard black anodized
- Ergonomic thumbshelf contoured for maximum comfort
- Increased stability for support hand
- Ambidextrous for right handed or left handed shooters
-
Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)
$298.00Original price was: $298.00.$208.60Current price is: $208.60. Add to cartGet the perfect balance with External forend weights. Designed for M-Lok chassis with configurations similar to the MPA Matrix.
FEATURES
- Black Nitride finish
- Integral Flush cup
- Shaped to be support hand friendly during push/pull/press positional shooting
- Compatible with MPA internal weight kits on Matrix
- Full kit (6 weights) includes 4 short weights and 2 long weights
- Full kit adds just over 2.5 pounds (41 oz.)
- Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
- Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)
Available with all M-Lok Hardware
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
-
Sale!
Out of stock
MasterPiece Arms BA Comp Competition Side Rails – For BA Comp Chassis – Black
$199.00Original price was: $199.00.$139.30Current price is: $139.30. Read moreCompetition Side Rails, designed for the BA Comp chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.
Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags. The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.
The side rails are compatible with the MPA internal weights and Gray Ops CNC Side Rail Weights, available for purchase separately.
System includes:
- Left and right side rail
- 8 “t-nuts”
- 8 fasteners for attaching the rails to the nuts
- 8 fasteners for attaching to the MPA Internal Weight System.
Compatible only with the BA and BA Comp chassis
Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.
See below for compatibility with various arca clamp products:
- MPA RAT Clamp & RAT Accessories – Compatible
- Area 419 Knob type Arcalock Clamp – Compatible
- GrayOps Mini Plate Pro – Compatible
- GrayOps Mag Cut Mini Plate – Not Compatible
- GrayOps Amp Elite Multi Plate – Compatible
- GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
- Area 419 Harris Bipod Arca Clamp Kit – Compatible
- Really Right Stuff BTC-Pro Clamp – Not Compatible
- Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
- Really Right Stuff SC-LR Throw Lever Clamp – Compatible
- Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
- Cyke Pod Bipods – Compatible
- Cruxord Tripos – Compatible
- Leofoto Tripods with Throw Lever Clamp – Compatible
- RRS Tripos with Throw Lever Clamp – Compatible
To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.
We will continue to update this list.
-
ATLAS BT17: 4″ 1913 Picatinny Rail
$47.10 Read moreThe BT17 – 4″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).
A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.
Weight: 1.20 ounces
-
Sale!
Out of stock
Gray Ops Brass Weights for Mini Plate V2
$99.00Original price was: $99.00.$69.30Current price is: $69.30. Read moreEnhance your shooting stability with the Brass Weights for Mini Plate V2 from Gray Ops CNC, an optional add-on that increases recoil reduction and grip by adding 12 ounces of weight.
-
Gray Ops Outdoorsman Arca Adapter
$59.00Original price was: $59.00.$41.30Current price is: $41.30. Add to cartNOTES:
- This product only works with Outdoorsmans Binocular Mounts and is specifically designed with custom anti-rotate pins for exact fitment.
- Does not include Outdoorsmans Binocular Mount
PURPOSE:
- Attach to bottom of Outdoorsmans Bino Mounts for a true Anti-rotate arca adapter
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins to fit Outdoorsmans Bino Mount
- Includes “captured” 1/4-20 screw
-
Sale!
Out of stock
Gray Ops AMP Annealing Block
$79.00Original price was: $79.00.$55.30Current price is: $55.30. Read moreFEATURES
- Machined from 6061 Aluminum
- Holds up to 6 AMP Annealing Pilots and 1 Brass Case holder
- Compatible with Gray Ops Reloading Base Stand
INCLUDED
- AMP Annealer Organization Block
- 4 Rubber Feet