Shooting Accessories | Page 9 Of 13 | Insite Arms

Out of stock
Falcon-III Backpack 35L
$269.00 Select options This product has multiple variants. The options may be chosen on the product page

Falcon-III™ Backpack
Enlarged and improved Falcon backpack with CCW compatibility.

PATENT PENDING

MAXPEDITION® BACKPACKS

Maxpedition backpacks are built for hauling gear and ergonomically designed to never drag you down. Curvaceous, foam-padded double shoulder straps contour to your chest and a sternum suspension belt helps distribute weight evenly throughout your upper body, so you can carry a load without falling behind.

Made with high quality nylon stitching, self-repairing YKK® zippers and a durable water-resistant exterior; Maxpedition backpacks have multiple compartments and pockets and offer plenty of space for mission essentials, camping gear, hydration reservoirs, laptops, textbooks and CCW.
Out of stock
Armageddon Gear Kit Bags Plus
Price range: $134.99 through $174.99 Select options This product has multiple variants. The options may be chosen on the product page

The Armageddon Gear Kit Bags Plus offers a durable and convenient way to carry everything from tools and small equipment to weapons, clothing, and specialized gear.
Sale!
The “Heathen” G2 5-Port Muzzle Brake Stainless NITRIDED BLACK
Original price was: $199.00.Current price is: $149.00. Select options This product has multiple variants. The options may be chosen on the product page

The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The G2 Heathen has optimized specific features for competition and precision marksmen demanding the utmost in performance from a large bodied muzzle brake.
Out of stock
ATLAS BT81: Lil’ Brandi
$81.39 Read more
The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.

It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.

Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
- Dimensions: 1.95 x 1.5 x 0.663 in
- Weight: 0.89 ounces
Weight: 1.20 ounces
Sale! Out of stock
OBi LINK SYSTEM — CLAMP LOCK SHORT BARS
Original price was: $19.79.Current price is: $11.87. Read more

The Clamp Lock Short Bars are used to mount the Clamp Lock to a belt or strap up to 1.5 inches in width.

—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.
Sale! Out of stock
OBi LINK SYSTEM — CLAMP LOCK LONG BARS
Original price was: $19.79.Current price is: $11.87. Read more

The Clamp Lock Long Bars are used to mount the Clamp Lock to a belt or strap up to 1.5 inches in width.

—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.
Sale! Out of stock
Magwell Plate “HOOK” for BA Comp, ESR, Matrix, Matrix Pro/II, Vanquish and Hybrid
Original price was: $83.99.Current price is: $79.00. Read more

THIS PRODUCT IS FOR THE “HOOK” PLATE ONLY – NOT THE WHOLE KIT

This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

The plates can be purchased individually or a complete kit. See the drop down menu for options.

Machined from Solid 6061 aluminum, black anodized, ready to install.

These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

Here is a link to this product upgrade.

If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
Out of stock
MasterPiece Arms ( MPA ) Magwell Plate: Mag Blocker for Matrix Pro
$83.99 Read more

This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

The plates can be purchased individually or a complete kit. See the drop down menu for options.

Machined from Solid 6061 aluminum, black anodized, ready to install.

These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

Here is a link to this product upgrade.

If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.
Sale!
OBi LINK SYSTEM – P-A Quick Mount
Original price was: $144.99.Current price is: $86.99. Add to cart

The U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.

*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On-
Sale!
OBi LINK SYSTEM – U-Plate ARCA – Black
Original price was: $18.99.Current price is: $11.39. Add to cart

The U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.

*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On-
Sale! Out of stock
Gray Ops CNC MasterPiece Arms MPA Side Rail Inserts For MPA Matrix/ESR Chassis- Aluminum **** Will Fit Matrix Pro With Additional Side Rails
Original price was: $149.00.Current price is: $104.30. Read more
PURPOSE:

Ergonomic gripping locations

Light weight (1.6 oz each insert)

Multiple Flush Cup locations for accessories such as the “Sikes Clutch”

FEATURES:

Machined from 6061 Aluminum

Black Anodize Hard Coat finish

Includes (2) two inserts

Each insert has 6 built in flush cup locations (12 total per pair) for each sling and accessory attachment

Lightweight at 1.6 ounces per insert

Hardware to attach to side rails included

NOTES:

MPA Side rails purchased separately via MPA website

Inserts only compatible with Side Rails from MPA
Tab Gear Gen II Rifle Cover Extra long up to 52″
$179.99 Select options This product has multiple variants. The options may be chosen on the product page
Protect your rifle from the elements. Whether you are carrying your rifle in the field or it’s sitting on the line with the bipod legs down. Dirt, mud, grass, dust, water, or sunlight cannot reach your rifle when a TAB Rifle cover is protecting it.
- Made from 1000 Denier Cordura Nylon
- Webbing is all 1″ Milspec
- Carry handle for convenient transport of rifle
- Scope and muzzle areas protected with closed cell foam padding
- Heavy duty Milspec D-rings for attaching rifle cover to pack
- Fastex buckles for easy access
- Rifle slings still available for normal carry
- Bipod legs can be fully enclosed for carry or left out for rapid deployment # Compact size when folded, fits into BDU cargo pocket
- Weighs less than 19 ounces
- Keeps rifle protected and cooler in the sun
All Rifle Covers are custom made orders. Please allow 14-21 days for the cover/covers to be made and shipped.

Models Available

GEN I:
Fits sporter style stocks, McMillan HTG(M40A1), Win. HBV, Remington PSS, FN SPR, etc. to an OAL of 46″ and scopes to 24″ in length.

GEN II:
Fits the Accuracy International, M25, McMillan A-Series, and TRG stocks to an OAL of 46″ and scopes to 24″ in length.

GEN III:
Fits SR25 and AR10 with an overall length of 46″ and scopes up to 21″.
Sale!
Gray Ops CNC – Brass Magneto Speed V3 Mount Angled Adapter
Original price was: $35.00.Current price is: $24.50. Add to cart

Elevate your shooting precision with the Gray Ops Brass Magneto Speed V3 Mount Angled Adapter, expertly designed to ensure perfect parallel alignment of the Magneto Speed V3 Bayonet to your angled forends on hunting or traditional style stocks/chassis.
Out of stock
Tab Gear A3 Arms Band
$27.99 Read more
Keep your dope at hand with the A3 Armband.

Simple construction allows comfortable use and minimal bulk. Dual adjustable elastic bands keep the A3 exactly where you want it.

Velcro allows the cards to be easily changed.

FEATURES :
- Dual adjustable elastic armbands
- 2″ Loop Velcro allows attachment of dope cards
- Includes 2 cards with velcro backing
- Integrated Pen Loop
- Made in Texas with US made materials!
- Lifetime Warranty
SPECS :
- 7″ x 4″ x 2″
- 2.25oz empty
WCD Kydex Tikka Mag Carrier – Walsh Custom Defence
$59.99 Select options This product has multiple variants. The options may be chosen on the product page

Our WCD Kydex SA Mag Holsters for Tikka magazines are custom made, one at a time and hand fitted before shipping. Each holster has an open bottom with a rubber stop, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA . A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available. Other colors available upon request.

Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster

NOTE: Standard Belt Clips accommodate belts up to 1/4” thick

NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws prior to setting desired tension to prevent screws from backing out during use
Out of stock
WCD Kydex Kestrel Holder: Walsh Custom Defence
$59.99 Select options This product has multiple variants. The options may be chosen on the product page

The WCD Kydex Kestrel Holster is custom made with fully adjustable retention and is lined with soft material on the inside to protect your screen from being scratched and comes with a 1.5” or 1.75” belt clip which are made in the USA. A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several colors to choose from like all of our Kydex Holster products. Each holster hand made and fitted before leaving the shop.

NOTE: Standard Belt Clips accommodate belts up to 1/4” thick

NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws once desired tension is set to prevent screws from backing out during use
WCD WCD 22LR Ammo Carrier: Walsh Custom Defence
$74.99 Select options This product has multiple variants. The options may be chosen on the product page

We created this carrier with the 22LR competition shooter in mind. The WCD 22LR Ammo Carrier allows you to conveniently carry 200 rounds of your favorite 22LR ammo in a compact and secure package. Each carrier contains a rigid plastic box with 4 divided slots that will accept most 50 round 22LR boxes and uses Velcro to attach to the center of the carrier so it can be easily removed if needed. When fully open, the lower portion of the carrier can be used as a dump area to load your magazines and keep your ammo out of the dirt. Like all of our products, each carrier is handmade with Cordura 1000D, nylon thread and craftsmanship that is second to none. Available in Coyote Brown, OD Green, Gunmetal Gray and Black

***PLEASE NOTE: ELEY BOXES DO NOT FIT IN THIS CARRIER*** A CARRIER FOR ELEY IS CURRENTLY BEING DESIGNED. PLEASE CHECK BACK
Sale! Out of stock
Gray Ops Reloading Block Stand Kit
Original price was: $99.00.Current price is: $69.30. Read more
Atlas B&T BT30-R: Black Atlas Bipod Pouch
$80.90 Add to cart

BT30-B: Black Atlas Bipod Pouch

The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.

It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.

Made out of 1000 denier corder nylon.
Sale! Out of stock
Armageddon Gear Perfect Carbine Case black 42″
Original price was: $232.91.Current price is: $163.04. Read more

The Armageddon Gear Perfect Carbine Case is compact, yet loaded with features. This carbine case is available in 35” and 42” versions to hold AR15s or AR10s and similar rifles.
Sale!
AR-15 Accessory Bit Pack FISAR15-ABP3
Original price was: $34.99.Current price is: $24.49. Add to cart
Three custom bits designed to aid in maintaining and working on an AR-15. Includes:
- Bolt Carrier Group Scraper Bit
- Castle Nut Wrench Bit
- A2 Front Sight Bit
Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.

Can also be used with any standard magnetic 1/4″ Bit Driver

NOTE: Fix It Sticks Not Included