Support Bags & Range Gear | Page 8 Of 9 | Insite Arms

OBi LINK SYSTEM — CLAMP LOCK LONG BARS
$17.99 Add to cart

The Clamp Lock Long Bars are used to mount the Clamp Lock to a belt or strap up to 1.5 inches in width.

—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-

*CLAMP LOCK*

–Bolts to the strap. Won’t ever move.

–Can be used on 1/2 inch – 1.5-inch strap.

–Can be used vertically or horizontally.

–4x mounting screws included.
Sale!
OBi DIE STAX SYSTEM — STAX DROP
Original price was: $24.99.Current price is: $19.99. Add to cart

OBi Die Stax System is an organization system made to keep your reloading room clean and organized.

OBi Stax Drop is used as a support when you want to rest the Die Stax on a countertop. It supports the front side of the Stax Blocks. The Stax Drop uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with more Stax Blocks or other Stax Drops.

—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.

—-NOTE—- When resting on the countertop you will need at least one Stax Drop.

*STAX DROP*

-Supports the front of the Die Stax

-Attaches the Stax Bushing to other Stax Blocks

-Compatible with all other Stax products
Sale!
OBi DIE STAX SYSTEM — STAX BUSHING
Original price was: $34.99.Current price is: $27.99. Add to cart

OBi Die Stax System is an organization system made to keep your reloading room clean and organized.

OBi Stax Bushing organizes up to 2 neck bushings, 1 expander ball and up to 2 allen wrenches or decap pins. The Stax Bushing uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with any Stax Blocks or Stax Drops.

—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.

—-NOTE—- When resting on the countertop you will need at least one Stax Drop.

*STAX BLOCK 10*

-Organizes 2 neck bushings

-organizes 1 expander ball

-Organizes up to 2 allen wrenches or decap pins

-Compatible with all other Stax products
Sale!
OBi DIE STAX SYSTEM — STAX BLOCK 5
Original price was: $89.99.Current price is: $71.99. Add to cart

OBi Die Stax System is an organization system made to keep your reloading room clean and organized.

OBi Stax Block 5 organizes 5 reloading dies and a combination of up to 10 allen wrenches or decap pins. The Stax Block 10 uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with more Stax Blocks or Stax Drops.

—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.

—-NOTE—- When resting on the countertop you will need at least one Stax Drop.

*STAX BLOCK 5*

-Organizes 5 dies

-Organizes up to 10 allen wrenches or decap pins

-Compatible with all other Stax products
Sale!
OBi DIE STAX SYSTEM — STAX BLOCK 10
Original price was: $124.99.Current price is: $99.99. Add to cart

OBi Die Stax System is an organization system made to keep your reloading room clean and organized.

OBi Stax Block 10 is the most commonly used Stax Block. The Stax Block 10 organizes 10

reloading dies and a combination of up to 10 allen wrenches or decap pins. The Stax Block 10 uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with more Stax Blocks or Stax Drops.

—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.

—-NOTE—- When resting on the countertop you will need at least one Stax Drop.

*STAX BLOCK 10*

-Organizes 10 dies

-Organizes up to 10 allen wrenches or decap pins

-Compatible with all other Stax products
Sale!
OBi DIE STAX SYSTEM — STAX BAR
Original price was: $39.99.Current price is: $31.99. Add to cart

OBi Die Stax System is an organization system made to keep your reloading room clean and organized.

OBi Stax Bar is the first part of our Die Stax System. It supports the Stax Block and can be mounted to the wall or resting on the counter top.

—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.

—-NOTE—- When resting on the countertop you will need at least one Stax Drop.

*STAX BAR*

-Is the first part of the Die Stax System you will need

-Bolts to the wall

-Rests on the countertop

-Compatible with all other Stax products
Sale!
OBi DIE STAX SYSTEM — STAX BLOCK
Original price was: $39.99.Current price is: $31.99. Add to cart

OBi Die Stax System is an organization system made to keep your reloading room clean and organized.

OBi Stax Block organizes one reloading die and a combination of up to 2 allen wrenches or decap pins. The Stax Block uses the Stax Bar for mounting it to the wall or resting on the countertop and can be used with more Stax Blocks or Stax Drops.

—-NOTE—- You will need at least one Stax Bar AND one or more Stax Blocks to hold your die sets.

—-NOTE—- When resting on the countertop you will need at least one Stax Drop.

*STAX BLOCK*

-Organizes 1 die

-Organizes up to 2 allen wrenches or decap pins

-Compatible with all other Stax products
Armageddon Gear “OG” Optimized Game Changer Git Lite lightweight fill
$249.99 Select options

The Armageddon Gear Game Changer OG Bag, featuring a waxed canvas fabric, gives shooters a versatile and effective solution for firearm stability during uncomfortable shooting positions.
ATLAS BT63: Nose Rail
$72.39 Add to cart
The BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock.

Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Overall Length: 7.0″
- Picatinny Rail Section Length: 2.0″
- Center-to-center Hole Spacing: 3″ and 3.75″
- Weight: 2.6 ounces
Area 419 ARCALOCK Spigot Extension FOR 5H BIPOD ARCA RAIL USE
$41.00 Add to cart
It is ideal to adapt our BT35-NC 5-H Atlas Bipod to an ARCA clamp for clearance of the cradle and operation of the clamp’s knob. It will also extend all “NC” or No Clamp models (view complete list below) of Atlas Bipods out extra 1.25″ for increased stability. To use with your Bipod that already has a clamp, lever or mount installed, simply remove it to attach the spigot.

This spigot is manufactured by Area 419 NOT by B&T Industries L.L.C. Includes two 10-32 x 3/8″ flathead socket screws and two 10-32 x 5/8″ flathead socket screws.
- Weight: 1.79 oz
- Dimensions: 3.2 × 1.24 × 0.35 in
Sale!
OBi LINK SYSTEM – MOCCASINS (TRIPOD FEET) 3/8-16 (RRS and Leofoto)
Original price was: $104.99.Current price is: $78.74. Add to cart

The Obi Moccasins are the perfect addition to your precision tripod. They’ve got the right amount of aggression and ample surface area to keep you stable in all condiitons. They dig in hard and don’t sink or slip in the sand/mud/dirt. ANd they don’t add too much height or weight to your tripod.

The Moccasins come as a set of 3 and are threaded for either 16-2 metric (Feisol) or 3/8-16 (RRS). They feature a tension washer that keeps them securely fastened – because nobody wants things unscrewing when you don’t want them too!
Sale!
OBi LINK SYSTEM – U-Plate
Original price was: $18.99.Current price is: $14.24. Add to cart

The U-Plate Arca is a replacement part for the U-Plate. The U-plate Arca has an arca mounting strip built into all four sides and easily fits into a tripod or any other type of arca mount in any direction.

*U-Plate Arca*
-Fits Clamp Lock-
-Fits Slide Lock-
-Fits Camera Lock-
-Fits Grip On-
Sale!
OBi LINK SYSTEM — Square Plate
Original price was: $55.99.Current price is: $41.99. Add to cart

The OBi System Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction and a 9-inch strap that will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach.
Rangefinder PLRF 25 Arca Mount
$91.99 Add to cart
PURPOSE:
- Attach to bottom of PLRF25 Vectronix Rangefinders for use in 1.5” Arca Clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins for secure fit onto LRF
- Custom machined for exact fitment and access to battery compartment
- Textured surface for “thumb grip” during offhand use
- Includes ¼-20 screw
Rangefinder PLRF 10/15 Arca Mount
$83.99 Add to cart
Made specifically for the Vectronix line of PLRF 10 and 15 rangefinders.
- Machined from one piece 6061 Aluminum
- Hard anodized black
- 4-directional Arca dovetail
- Built in anti-rotate pins for rock solid lockup
- Anti-slip grooves cut for added grip when using offhand
- Exact fit to follow contour of rubber LRF housing
- Stainless steel hardware included
Sale!
OBi LINK SYSTEM — CAMERA LOCK
Original price was: $69.99.Current price is: $52.49. Add to cart

The OBi Link System Camera Lock works excellent for Cameras, Spotting Scopes, and Binoculars, as well as mounting to the wall to help organize your gear. It mounts using a 1/4-20 bolt and has arca built into the plastic, allowing you to clamp it into your tripod and hang it from your backpack strap.

NOTE: You will need at least one Round Post M-Lok, Quick Detach Post, or Anywhere Post for a complete system.
Sale!
MasterPiece Arms Side Rails – For Matrix / ESR Chassis – Black
Original price was: $179.99.Current price is: $159.99. Add to cart
Competition Side Rails, designed for the Matrix or ESR Chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.

Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags. The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.

The side rails are compatible with MPA weight tuning system and the Gray Ops CNC Side Rail Weights made specifically for the ESR/Matrix Comp Side Rails, available for purchase separately.

System includes:
- Left and right side rail
- 8 “M-lok Nuts”
- 8 fasteners for attaching the rails to the nuts
- 8 fasteners for attaching to the MPA Internal Weight System.
Compatible only with the Matrix & ESR chassis

Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.

See below for compatibility with various arca clamp products:
- MPA RAT Clamp & RAT Accessories – Compatible
- Area 419 Knob type Arcalock Clamp – Compatible
- GrayOps Mini Plate Pro – Compatible
- GrayOps Mag Cut Mini Plate – Not Compatible
- GrayOps Amp Elite Multi Plate – Compatible
- GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
- Area 419 Harris Bipod Arca Clamp Kit – Compatible
- Really Right Stuff BTC-Pro Clamp – Not Compatible
- Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
- Really Right Stuff SC-LR Throw Lever Clamp – Compatible
- Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
- Cyke Pod Bipods – Compatible
- Cruxord Arca Clamp Tripods – Compatible
- Leofoto Acra Throw Lever Clamp Tripods – Compatible
- RRS Arca Throw Lever Clamp Tripods – Compatible
To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.
ATLAS BT70: Atlas M-LOK® Adapter
$47.10 Add to cart
The BT70 Atlas M-LOK® Adapter is an interface between all Atlas Bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting.

Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 3.15″
- Width: 1.11″
- Weight: 1.135 oz
Atlas BT72-NC Super Cal Bi-Pod
$506.00 Add to cart
BT72-NC Super CAL Atlas Bipod
The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This “No Clamp” model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT72-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.

Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology™.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.

Height Range: 5.6 – 10.8” (7.4” at 90°)

Preloaded Cant: 45 degrees

Position Button: 0.5″ diameter

5 leg positions: 0, 45, 90, 135 & 180 degrees

Non-Rotating Legs: outer leg does not rotate around inner leg

Weight: 21.3 ounces

Footprint: 14.75-19.37″
Out of stock
BT47-NC PSR Atlas Bipod: Tall No Clamp
$418.00 Read more
The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.

It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.

The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 6.2 – 12.5″ (8.3” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5″ diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.86 ounces approx.
- Footprint: 10-14.5″
Sale!
Gray Ops Turret Guards – MPA BA Scope Mount (New Style Only)
Original price was: $109.99.Current price is: $82.49. Add to cart
***Only Compatible with new style MPA BA Scope mount with side tapped holes***

PURPOSE
- Added protection for your scope turrets
- Prevents “rolling a turret” during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall elevation and (1) Short Right hand windage turret guard
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to “load” into