-
Sale!
OBi LINK SYSTEM — GRIP ON SQUARE
Original price was: $159.99.$119.99Current price is: $119.99. Add to cartThe Grip On Square is excellent for connecting tripods and water bottles to your backpack or belt. Most Commonly used on the leg of a tripod to attach a camera or pair of binoculars. The square post is anti-rotation keeping your gear in a safe, easy-to-access position. The Grip On Square comes standard with a Square Plate, which mounts in any direction. The Grip On Square also comes with a 9-inch strap and will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach. Attach the Grip On Square by loosening the strap until it fits around the gear, pull the strap snugly, then tighten the Allen bolt to the desired tension.
*GRIP ON Square*
-Fits Tripod-
-Fits Water Bottle-
-Fits Cup-
-Connects to Lock Family-
-Connects to Grip On Family- -
OBi LINK SYSTEM — ROUND POST MPA MATRIX PRO
$54.99 Read moreThe Round Post Matrix Pro or RPM mounts to the M-lok slot on the forend of your MPA Matrix Pro rifle stock or any other piece of gear with an M-lok slot or similar hole spacing. Once it is attached to your rifle or other equipment, it connects to any of the Lock or Grip On families.
*RP M*
-Mounts to MPA Matrix Pro forend and gives enough clearance for the wide body-
-Mounts to M-lok rail.-
-M-lok hardware is included. –
-Connects to Lock family-
-Connects to Grip On family-*CLAMP LOCK with TEK-LOK*
-Attaches to belt or 1.5-inch strap
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
-
Armageddon Gear “OG” Optimized Game Changer Git Lite lightweight fill
$249.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Armageddon Gear Game Changer OG Bag, featuring a waxed canvas fabric, gives shooters a versatile and effective solution for firearm stability during uncomfortable shooting positions. -
Sale!
FIX IT STICKS POUCH BENCH BLOCK
Original price was: $24.99.$22.99Current price is: $22.99. Add to cartDescription
Pouch Block
- Helps secure parts when driving pins
- High impact polymer protects gun finish
- Non-slip feet for table top use
- Integrates with Fix It Sticks Armorer’s Kit Case
-
Fix It Sticks LONG RANGE COMPETITION TOOLKIT with Individual Tourque Limiters
$454.99 Read morePrecision is the name of the game in long-range shooting, and Fix It Sticks’ Long-Range Competition Toolkit will help you keep your high-performance rifle in peak running condition while in the field.
Use this comprehensive assortment of tools in even the most austere conditions. With it, you can tighten down your optics, action and accessories to the correct torque to ensure precise round placement, shot after shot.
The Long-Range Competition Toolkit includes:
- Ratchet T-Handle w/Locking Hex Drive
- 15, 25, 45, 65 in-lbs torque limiters or All-In-One Torque Driver
- 1/2″ Socket/Adapter
- Mini Pry Bar
- Pin Punch Set (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 1/4″)
- Bronze Scraper
- Steel Pick
- Cleaning Brush Bit
- Set of two 8-32 adapters
- Machined Aluminum Bubble Level Set, which includes: magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials
- Stainless Steel Rod Set (6) with .223/6.5/.30 Brass Adapters & Ball Bearing Drive (locks into T-handle, assembles to 44″)
- 3/16″ Extended Action Bit
- 5/32″ Extended Action Bit
- 24 Chrome Plated Bits: T8, T10, T15, T20, T25, T27, T30, P1, P2, [Hex 0.050″, 5/64″, 3/32″, 1/8″, 7/64″, 9/64″, 5/32″, 3/16″, 1/4″, 2.5mm, 3mm, 4mm, 5mm] [Slotted 3/16″, 3/32″]
- Magnetic Velcro Patch
- Micro Fiber Lens Cloth
- Torque Value Reference/Conversion Card
- Soft Carrying Case with molded, low-profile bit holders designed to hold any bit / accessory with a standard 1/4″ Base
-
Vihtavuori Premium N570 Reloading Powder – 1kg
$169.00 Read moreVIHTAVUORI N570 HEAVY RIFLE POWDER
Vihtavuori’s N570 rifle powder is one of the more recent products in our high-energy powder family. It was developed at the request of magnum cartridge reloaders. We realized that this kind of powder was desired yet lacking on the market, so we decided to develop N570 to meet our customers’ needs.
The characteristics of this high energy powder with its large grain size and high bulk density are developed to bring out the maximum velocities of cartridges with very large volume cases like the 6,5-.284 Norma, the .300 Winchester Magnum, the .300 Remington Ultra Magnum and the .338 Lapua Magnum.
Vihtavuori N570 is very well suited for long-range target shooting and in military applications with big volume cartridges.
N570 is the slowest of our high-energy powders and is an extruded, tubular powder type with grain dimensions of 2,3 mm length and 1,3 mm diameter. Due to the large kernel size (similar to 24N41 and 20N29), we recommend you to always weigh your N570 charges rather than relying on throws from powder measures, as they do not always deliver consistent charges. This way you can avoid under or over-charging cases.
Like all of our N500 series rifle powders, the N570 is manufactured from our own high-quality nitro-cellulose with grains impregnated with nitroglycerine and non-energetic additives. The result: increased muzzle velocity without increased chamber pressure and without increased wear on the gun!
-
Bix’n Andy TacSport Trigger Shoe Bix’n Andy Gator – Grip
$49.99 Read moreThe shooters asked and Bix’n Andy answered!
These exchangeable trigger shoes are for shooters that want to customize their trigger experience. Four different styles to choose from and they’re easy to swap out.
The Smooth Curved Shoe is what the Bix’n Andy Benchrest triggers use. It is wider than the original TacSport shoe and is an absolute favorite among shooters around the world.
The Gator Grip is the same width as the Competition shoe, but has a very appealing gator traction machined into the aluminum trigger shoe. This traction is very satisfying to the touch and provides an extra sense of touch when utilizing a light trigger pull weight in a tactical competition or cold hunting conditions.
Hunters around the world have come to enjoy a ribbed trigger shoe. This smooth, wide shoe has 3 grooved ribs machined into the surface that offers a nice sense of finger location on the trigger.
Finally, the 90º shoe is a wide and straight shoe that tactical shooters have come to love in many competition shooting disciplines. This shoe is vertical in relation to the rifle receiver and has a nice hook on the bottom to offer better finger orientation on the shoe.
-
Armageddon Gear 52″ Precision Rifle Case
$279.99 Select options This product has multiple variants. The options may be chosen on the product pageThe 58″ Armageddon Gear Precision Rifle Case is perfect for suppressed precision rifles. No more unscrewing your suppressor to case your rifle or leaving the butt of the rifle hanging out an open zipper that can’t be closed!
-
Peterson 6XC Brass Cases ( 50ct ) SRP
$98.99 Read moreDavid Tubb, owner of Superior Shooting Systems originally conceived and designed the caliber 6 XC. Tubb has won almost 30 different rifle championships and has proved to the world that the 6 XC is a highly effective, flat shooting caliber.
More than a year ago Tubb contacted Peterson Cartridge and asked if the team at Peterson could develop a tool pack to make 6 XCs. After months of tooling development and experimentation Peterson produced its first run. According to Derek Peterson the company’s president and head tooling designer, “Lots of shooters purchased these 6 XCs, shot them and complimented them highly.”
But Tubb reached out to Peterson to say he wasn’t happy with them. He wanted more internal volume. So Peterson went back to work and redesigned the tool pack. After more months of tooling revisions and experimentation Peterson produced its second iteration of 6 XCs.
David shot those second-iteration casings and reported to Derek, “Ok, you achieved the original goals I asked for, and these are every bit as good as those made by the European incumbent. But here’s the thing. Their casings are known to have soft heads that don’t hold up well to numerous reloads. Can you make a third iteration that has harder heads? Oh … and can you make a version in small rifle primer size also?”
So Derek went back to work and produced a third version that closely matches the internal volume of the European cases but with much harder heads. After shooting these, David declared them to be the best 6 XCs out there. This is the version Peterson produces today, in both large and small rifle primer size.
Peterson concluded, “Give them a try, and see if you agree.”
Additional Information
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
-
Armageddon Gear TriPod Handle (Black)
$44.99 Add to cartThis Armageddon Gear Tripod Handle is designed to attach to your tripod to make it easier to carry from place to place.
-
MasterPiece MPA Matrix Professional Chassis
$2,095.00 Select options This product has multiple variants. The options may be chosen on the product pageMasterpiece Arms Chassis have been the gold standard for Long Range Shooters for the past 8 years. In the PRS, which is the testing ground for the best rifle equipment produced, the MPA Chassis is the #1 Chassis (used by the most shooters), won more 1 and 2 Day matches and the most AG Cup Matches since the series inception. Our Chassis Technology is market leading, allowing shooters who run our chassis to hit more targets, win more matches, and harvest more trophies.
-
ATLAS BT73: M-LOK® Rail
$47.18 Read moreThe BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.
Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.
- Length: 1.575″
- Width: 0.835″
- Weight: 0.59 oz
For a direct M-LOK® to “NC” (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter
-
ATLAS BT20-B: Atlas Accuracy International Spigot Bottom Rail
$40.39 Read moreThe BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod.
It is the same rail found on our BT21 TRG Bracket, BT43 Leveraged Rail and BT20-B/ARCALOCK Clamp. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept any rail mounted bipod.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Length: 1.60″
- Weight: 0.57 ounces
-
ATLAS BT49: 2.05″ 1913 Adjustable Picatinny Rail
$40.39 Read moreThe BT49 – 2.05″ 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 – 1.6″ with a 1.00″ radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks.
The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Length: 2.05″
- Weight: 0.4 ounces
-
Peterson 6mm Dasher Brass Cases ( 50ct )
$114.99 Read moreFeaturing a 40-degree Ackley-type shoulder and 10 percent more case capacity over the parent 6mm BR case, the 6mm Dasher has been used to set records in the 600 and 1,000-yard benchrest community, and has become a favorite among competitors in the Precision Rifle Series as well.
“The PRS community and the long-range benchrest guys are groups that are important to us” stated Peterson Cartridge president Derek Peterson. “We already make most of the common PRS cartridges, so the 6mm Dasher was naturally next in line for those guys looking to compete with a long-range 6mm, with minimal recoil. The 6 Dasher is one of those cartridges that packs a ton of power and performance in a tiny package, and we decided to make them based on requests from our friends in these disciplines” Peterson said.
The 6 Dasher made by Peterson are offered in Small Rifle Primer (SRP) pocket size only. They have a .060” flash hole diameter, same as Lapua’s small rifle primer pockets. They will require a small de-capping pin, just like Peterson’s 6 BR casings. There is no SAAMI or CIP spec for 6mm Dasher. So, the caliber development guys at Peterson had to decide which dimensions they were going to make their casings to. Regarding Length-To-Shoulder (LTS), Peterson consulted the Sierra, Berger and Lyman reloading manuals and designed the Peterson 6 Dasher casings to comply with the guidance from all three manuals.
Regarding Overall Length (OAL), Peterson researched all the popular chamber reamer sizes, and decided to make its casings with an OAL of 1.53” + or – .0005, so they’ll fit in the common 6 Dasher chambers. The base diameter of Peterson 6 Dasher is the same as the base diameter of its 6 BR casings. Plus, these Dashers have the correct neck wall thickness of .0013”.
Peterson concluded, “No more need to fireform or hydroform 6BRs. Now you can get properly headstamped 6mm Dasher, with the ideal neck wall thickness and harder heads than the other competitors.”
-
Fix It Sticks BRONZE SCRAPER
$14.99 Add to cartCustom all purpose Bronze Scraper bit.
- Accepts threaded 8/32 rods / attachments.
- Comes with a Steel 8/32 insert bit so it can work with any standard magnetic 1/4″ driver
- Integrates perfectly with Fix It Sticks Replaceable Edition or T-Way T-Handle Wrench for field / travel use.
-
MDT .223 METAL AICS MAGAZINE 10 round
$79.95 Add to cartPRODUCT DETAILS
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
DETAILS
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
SPECIFICATIONS
10-Round:
- 3.055” Outside Length
- 3.90″ Rear Height (same height as MDT 10-rd .308 metal magazines)
- 2.50” max cartridge overall length (COAL)
- Polymer feedlip inserts extend ~0.5″ past the end of the metal feedlip backer, thus retaining the round longer, helping ensure the tip of the round has entered the chamber before the rear of the round is released.
MDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.
10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.
COMPATIBILITY
- 223 Rem
- 5.56 NATO
-
MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 5 RND – no binder plate
$79.95 Add to cartPRODUCT DETAILS
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Available with or without the front binder plate. See details below for benefits and limitations of each version.
DETAILS
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
SPECIFICATIONS
- 3.055” Outside Length
- 2.870” max cartridge overall length (COAL) with binder plate
- 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
- 2.52” Rear Height
COMPATIBILITY
- 308WIN
- 6mm Creedmoor
- 243WIN
- 260 Rem
- 6.5 Creedmoor
- 7mm-08 Win
- 308/7.62×51 NATO
- 22 – 250 Rem (will work at a reduced capacity)
BINDER PLATE DETAILS
- The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
- The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart