-
Sale!
WILEY-X Vapor 2-lense Combo
Original price was: $133.99.$87.09Current price is: $87.09. Add to cartLock it in! Our Wiley X WX VAPOR is one of our most trusted pairs of eyewear. Featuring thin temples and as well as a sleek frame and an adjustable nose piece, the WX VAPOR is designed with style and comfort in mind. The WX VAPOR meets MIL-PRF-32432A ballistic safety standards keeping you safe from unexpected impacts. If you’re the type of person who needs durable eyewear, these glasses was made for you.
- Shatterproof Selenite™ Polycarbonate lenses that meet the MIL-PRF-32432A ballistic standards: ANSI Z87.1 optical clarity and high mass/high velocity impact standards: as well as US Federal OSHA 1910.133(b)(1)(1) standards
- 100% UVA/UVB protection with distortion free clarity
- Foil™ Lens Coating Provides Anti-Fog Protection.
- T-Shell™ Lens coating resists scratching
- Double-injected rubber temples for non-slip comfort
- Prescription Ready
FEATURES
High Velocity Impact Resistant
Meets ANSI Z87.1 high velocity impact safety and optical standards.UV Protection
Blocks the UV (Ultraviolet) that are harmful to our eyes, reducing the risk of damage to retinal cells and age-related macular degeneration while also reducing haze.Interchangeable Lenses
Provides exceptional protection and visibility in any condition. -
Sale!
WILEY-X DETECTION 5 LENS PACKAGE
Original price was: $279.00.$181.35Current price is: $181.35. Add to cartWhether you’re in the field or at the range, the WX Detection offers exceptional protection and optical clarity with a fit so comfortable you’ll forget you’re even wearing them. Adjustable wire-core temples are a flexible extension of the wrap-around frame that holds the ballistic-rated lenses securely in position. All five of the included orange, purple, copper, clear, and yellow lens options give you the advantage of crystal-clear vision in most any lighting condition.
Interchangeable lens system that can adapt to any lighting condition
- Orange, Purple, Copper, Clear, and Yellow, lenses included
- Meets ANSI Z87.1 safety standards for optical clarity and high mass/high velocity impact protection
- Up to 25% lighter than other shooting glasses
- 100% UVA/UVB protection with distortion free clarity
FEATURES
High Velocity Impact Resistant
Meets ANSI Z87.1 high velocity impact safety and optical standards.UV Protection
Blocks the UV (Ultraviolet) that are harmful to our eyes, reducing the risk of damage to retinal cells and age-related macular degeneration while also reducing haze.Interchangeable Lenses
Provides exceptional protection and visibility in any condition. -
FIX IT STICKS Small Torque Limiter 12 INCH LBS FISTL12
$54.99 Add to cartTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
FIX IT STICKS Small Torque Limiter 55 INCH LBS FISTL55
$54.99 Read moreTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
Sale!
LAPUA – .222 REM. MATCH RELOADING CASES – BOX OF 100
Original price was: $144.99.$115.99Current price is: $115.99. Add to cart4PH5002
Lapua offers new improved design case for friends of this accurate caliber. The .222 case is a true match case produced with extremely tight tolerances in neck concentricity and wall thickness like its big brother .223 Rem. Lapua Match case. The true Lapua match quality is now available also for the small game hunters.
-
Tab Gear Gen II Rifle Cover Extra long up to 52″
$179.99 Select options This product has multiple variants. The options may be chosen on the product pageProtect your rifle from the elements. Whether you are carrying your rifle in the field or it’s sitting on the line with the bipod legs down. Dirt, mud, grass, dust, water, or sunlight cannot reach your rifle when a TAB Rifle cover is protecting it.
- Made from 1000 Denier Cordura Nylon
- Webbing is all 1″ Milspec
- Carry handle for convenient transport of rifle
- Scope and muzzle areas protected with closed cell foam padding
- Heavy duty Milspec D-rings for attaching rifle cover to pack
- Fastex buckles for easy access
- Rifle slings still available for normal carry
- Bipod legs can be fully enclosed for carry or left out for rapid deployment # Compact size when folded, fits into BDU cargo pocket
- Weighs less than 19 ounces
- Keeps rifle protected and cooler in the sun
All Rifle Covers are custom made orders. Please allow 14-21 days for the cover/covers to be made and shipped.
Models Available
GEN I:
Fits sporter style stocks, McMillan HTG(M40A1), Win. HBV, Remington PSS, FN SPR, etc. to an OAL of 46″ and scopes to 24″ in length.
GEN II:
Fits the Accuracy International, M25, McMillan A-Series, and TRG stocks to an OAL of 46″ and scopes to 24″ in length.GEN III:
Fits SR25 and AR10 with an overall length of 46″ and scopes up to 21″. -
Gray Ops CNC – Brass Magneto Speed V3 Mount Angled Adapter
$54.99 Add to cartElevate your shooting precision with the Gray Ops Brass Magneto Speed V3 Mount Angled Adapter, expertly designed to ensure perfect parallel alignment of the Magneto Speed V3 Bayonet to your angled forends on hunting or traditional style stocks/chassis.
-
Tab Gear A3 Arms Band
$27.99 Read moreKeep your dope at hand with the A3 Armband.
Simple construction allows comfortable use and minimal bulk. Dual adjustable elastic bands keep the A3 exactly where you want it.
Velcro allows the cards to be easily changed.
FEATURES :
- Dual adjustable elastic armbands
- 2″ Loop Velcro allows attachment of dope cards
- Includes 2 cards with velcro backing
- Integrated Pen Loop
- Made in Texas with US made materials!
- Lifetime Warranty
SPECS :
- 7″ x 4″ x 2″
- 2.25oz empty
-
SPUHR 20-PACK RING SCREWS TOP COVER SCREWS
$14.99 Read moreArticle no.: P-100
A-0132 M4x10 Tx20 screws for new style top covers (20-pack). The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Note: for Top Covers with with 4-letter batch numbers and batch numbers from M13/XX forward. -
WCD Kydex Tikka Mag Carrier – Walsh Custom Defence
$59.99 Select options This product has multiple variants. The options may be chosen on the product pageOur WCD Kydex SA Mag Holsters for Tikka magazines are custom made, one at a time and hand fitted before shipping. Each holster has an open bottom with a rubber stop, fully adjustable tension and comes with a 1.5” or 1.75” belt clip which are made in the USA . A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several color options available. Other colors available upon request.
Please Note: For both left and right side carry positions, the bullet tips will be facing forward while magazine is in the holster
NOTE: Standard Belt Clips accommodate belts up to 1/4” thick
NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws prior to setting desired tension to prevent screws from backing out during use
-
WCD Kydex Kestrel Holder: Walsh Custom Defence
$59.99 Select options This product has multiple variants. The options may be chosen on the product pageThe WCD Kydex Kestrel Holster is custom made with fully adjustable retention and is lined with soft material on the inside to protect your screen from being scratched and comes with a 1.5” or 1.75” belt clip which are made in the USA. A genuine Blade-Tech Tek-Lok belt clip is also available for $15 each. Several colors to choose from like all of our Kydex Holster products. Each holster hand made and fitted before leaving the shop.
NOTE: Standard Belt Clips accommodate belts up to 1/4” thick
NOTE: We recommend adding Teflon tape or blue Loctite to all bushing/tension screws once desired tension is set to prevent screws from backing out during use
-
WCD WCD 22LR Ammo Carrier: Walsh Custom Defence
$74.99 Select options This product has multiple variants. The options may be chosen on the product pageWe created this carrier with the 22LR competition shooter in mind. The WCD 22LR Ammo Carrier allows you to conveniently carry 200 rounds of your favorite 22LR ammo in a compact and secure package. Each carrier contains a rigid plastic box with 4 divided slots that will accept most 50 round 22LR boxes and uses Velcro to attach to the center of the carrier so it can be easily removed if needed. When fully open, the lower portion of the carrier can be used as a dump area to load your magazines and keep your ammo out of the dirt. Like all of our products, each carrier is handmade with Cordura 1000D, nylon thread and craftsmanship that is second to none. Available in Coyote Brown, OD Green, Gunmetal Gray and Black
***PLEASE NOTE: ELEY BOXES DO NOT FIT IN THIS CARRIER*** A CARRIER FOR ELEY IS CURRENTLY BEING DESIGNED. PLEASE CHECK BACK
-
Insite Arms Barrel Tuner – For 1.125″ Heathen 5/8×24 thread Black Nitride
$200.00 Add to cartBarrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.
The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.
-
Nightforce X-Treme Duty™ Ultralite™ Rings 34mm – 6 Screw
$286.00 Select options This product has multiple variants. The options may be chosen on the product pageNightforce X-Treme Duty Ultralite 6 Screw Rings are made to the same high standard as the 4 screw rings but provide a larger contact area on the scope. This is ideal for ensuring precision and repeatability in high recoil magnum calibers.
-
MasterPiece Arms ( MPA ) 2 round Magazine Extension
$49.00 Add to cartDescription
MPA Mag Extender is designed for 308 Box magazines built by AICS or Accurate Mag â single feed only. (Will not work with AW Mags). Simply remove the existing floorplate, remove the base insert (from the Accurate Mags only), depress the spring into the mag body, slide the mag extender in place and secure with the included 6-32 set screw. Make sure the mag spring has seated itself flush with the bottom of the mag extender.
Produced from 6061 Aluminum. Cerakote Black  and laser engraved.
Increases the magazine capacity to 14 rounds.
Specify Magazine Type (Accurate or AICS)/
There is also a version for 6BR case magazines. To get this extender type, please select the appropriate magazine type on the menu. These 4 Round extenders will work with MPA, Freedom Gunworks and PVA 6BR Kits.
-
MasterPiece Arms ( MPA ) Enhanced Bag Rider
$129.99 Read moreProduct DetailsOur newest Enhanced Bag Rider design was designed for F-Class Shooters, and provides a rock solid rear support when using an appropriate dual ear (or âVâ) rear bag, such as the Protektor Series Rabbit Ear Design. It also provides an enhanced level of rear support for all long distance shooters, whether youâre a belly shooter or top level PRS competitor. This design has been successfully used this year at multiple PRS events by Team MPA Shooters.
The stability this rear bag rider provides is incredible, especially when shooting groups. If youâve ever had some challenges keeping the rifle ultra stable when prone, this accessory will improve performance.
This Enhanced Bag Rider works with all BA, BA Comp and BA lite chassis that have a 3 hole pattern on the bottom of the buttstock.
It comes with a black cerakoted bag rider, 2 set screws, and a turned step shaft designed to be inserted into the monopod slot for installation purposes. The side profile is notched to all use of the bottom flush cup for sling or bag attachment.
-
MasterPiece Arms ( MPA ) Bag Rider with Flush Cup
$29.00 Read moreThis bag rider design, with the included flush cup, was an idea from Dave Preston, winner of the 2015 PRS Series. The bag rider attaches to your MPA BA Chassis, Comp Chassis or BA Lite Chassis that has a threaded three hole pattern in the bottom of the buttstock body. Its general purpose is to allow a consistent management of recoil when using a rear bag.
The purpose the flush cup, as conceived by Dave, is used when shooting certain positional stances when a sling is used to provide support for the rifle. Have the rear connection point on the bottom of the rifle pulls the rifle downward, as compared to side positioned flush cups which can trend the rifle laterally.
-
Atlas B&T BT30-R: Black Atlas Bipod Pouch
$80.90 Add to cartBT30-B: Black Atlas Bipod Pouch
The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.
It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.
Made out of 1000 denier corder nylon.
-
SPUHR MOUNT SCT-4001 Ø34 H30MM OMIL TIKKA T3X / SAKO TRG 21/42
$348.99 Read moreArticle no.: SCT-4001
Our new Hunting Series of mounts – offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCT-4001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o’clock or 3-/9-o’clock position. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 2.75 mm/.108″ (from the bottom of the tube to the bridge of the mount body) Length: 108 mm/4.25” (mount body) Weight: 153 g/5.4 oz Note: For rifles with TRG/Tikka T3 dovetail – NOT for Picatinny rail or SAKO TRG-S. . Does not have enough clearance for the Trijicon AccuPower® 4.5-30×56. 10-degree wedge included -
Fix It Sticks MINI PRY BAR
$12.99 Add to cartCustom Bit designed to make your Fix It Sticks a mini pry-bar
Mini Pry Bar
- Corrosion resistant steel design makes the pry bar strong and durable
- Cut-outs allow the pry bar to be used as a 1/4″, 5/16”, and 3/8” wrench
- Works with any standard 1/4” driver
- Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Wrench for field / travel use.
NOTE: Fix It Sticks Not Included
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart