-
Armageddon Gear PINT-SIZE GAMECHANGER – Waxed Canvas GIT LITE FILL
$179.99 Select options This product has multiple variants. The options may be chosen on the product pageGIT LITE FILL***This bag is so good that the only excuse you’re going to have for a miss is a bad wind call. Just when you thought the Game Changer couldn’t get any better we have gone and done it with the new Waxed Canvas Shmedium model. It earns its name because the size is right between our legendary Pint-sized and OG bags, but the shot groups are tighter. If stability offered by Reasor Precision’s previous designs has changed your game, then you will love the support offered by the heavy fill and size combination of the Shmedium. Mobility is also enhanced with the new handle configurations making for more efficient transitions of this sturdy shooting bag. Plus, we have incorporated a new folded access pocket so you can adjust the heavy fill material to your preferred volume level. While some may say that the weight is impractical, Pro shooters will tell you that there is nothing more practical than getting impacts! If you want to turn your barricade shooting into bench-like results then try the Shmedium Game Changer from your friends in all things precision.
-
Armageddon Gear Trojan Rifle Cover
$139.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Trojan Rifle Cover is a prescription-strength remedy for those embarrassing moments when projectile malfunction keeps you down.
-
Short Action Precision ( SAP ) AMC Adaptive Mag Carrier System
$74.99 Select options This product has multiple variants. The options may be chosen on the product pageThe SAP AMC is the result of the growing demand for a precision rifle mag holster that is flexible enough to fit most precision mags on the market. This holster has an adjustable tension system that will allow you to adapt the retention to most any magazine that you throw at it. It also has enhanced features like a flared opening for easy mag insertion, a bottom that is mostly closed to keep dust and dirt from entering, as well as a bumper system that is included for enhanced use with .22 mags and shorter mags like 5 round or AW double stack mags.
Check out the Video Below to See All the Features!
Comes In Your Choice Of:
- Regular 1.5″ High Strength SAP Belt Clip
- Add an additional 1.75″ SAP Belt Clip for larger belts
- Molle webbing model
- Combat Loop Locking Belt Clip (adjustable for belt width up to 2″)
All AMC Versions come with:
- Adjustable Tensioner for Wide Range of Mag Compatibility
- Coyote, Black, and OD colors
- Protects the rounds while in the holster with closed bottom
- Comes with .22 Mag / Short Mag Bumper Kit
- Easily Adjustable with 1/8″ Allen (Not Included)
- Max mag dimensions: 3.08″L x 1″W
- Made in USA
We have tested the following mags to work with this holster:
- AICS 10 Round Single Stack (3902)
- AW 10 Round Double Stack (7602)
- AX 10 Round Single Stack (6955)
- AX 10 Round Double Stack (6677)
- AICS 5 Round (3901)
- AICS 10 Round .223 Mag
- Accurate-Mag .308 (Long and Regular)
- Accurate-Mag .223
- Accurate-Mag .300WSM/6.5PRC
- ARC 10 Round
- Bergara B-14R
- Bergara B-14 Centerfire
- Magpul .308 AICS Style Mags
- MDT Metal 10 Round (Regular and No Binder)
- MDT Metal 12 Round (Regular and No Binder)
- MDT Metal BR/Dasher 12 Round
- MDT Poly .308 10 Round Gen II
- MDT Poly .223 10 Round *
- MDT Poly/Metal 10 Round *
- Sako TRG 22
- Tikka CTR
- Tikka TAC A1
- Vudoo Poly Mags
- Vudoo Aluminum Mags
- Zermatt RimX
* Note: We use official Crye pattern Multicam Kydex in making these, and as such it is a random pattern so there are variances in all pieces and there is no way to guarantee a specific patterning on each holster.
* MDT Poly .223 and Poly/Metal Mag fitment is depth limited to the protruding exterior ribs on the body of the mag. If more depth is desired, ribs would need to be shaved down.
- 1.5″ or 1.75″ belt clip or Molle Clip Options
- Coyote, Black, Grey, and OD colors
- Protects the buttons while in the holster
- High strength SAP engraved belt clip on belt models
- Tactical Tailor Malice Clip on Molle models
- Works for 5700, 5700 Elite, and 5500 units
- Made in USA
-
MasterPiece Arms BA Comp Competition Side Rails – For BA Comp Chassis – Black
$174.99 Add to cartCompetition Side Rails, designed for the BA Comp chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.
Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags. The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.
The side rails are compatible with the MPA internal weights and Gray Ops CNC Side Rail Weights, available for purchase separately.
System includes:
- Left and right side rail
- 8 “t-nuts”
- 8 fasteners for attaching the rails to the nuts
- 8 fasteners for attaching to the MPA Internal Weight System.
Compatible only with the BA and BA Comp chassis
Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.
See below for compatibility with various arca clamp products:
- MPA RAT Clamp & RAT Accessories – Compatible
- Area 419 Knob type Arcalock Clamp – Compatible
- GrayOps Mini Plate Pro – Compatible
- GrayOps Mag Cut Mini Plate – Not Compatible
- GrayOps Amp Elite Multi Plate – Compatible
- GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
- Area 419 Harris Bipod Arca Clamp Kit – Compatible
- Really Right Stuff BTC-Pro Clamp – Not Compatible
- Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
- Really Right Stuff SC-LR Throw Lever Clamp – Compatible
- Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
- Cyke Pod Bipods – Compatible
- Cruxord Tripos – Compatible
- Leofoto Tripods with Throw Lever Clamp – Compatible
- RRS Tripos with Throw Lever Clamp – Compatible
To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.
We will continue to update this list.
-
Short Action Precision ( SAP ) KMH Kestrel Molle Holster
$78.99 Select options This product has multiple variants. The options may be chosen on the product pageHere’s a great way to keep your Kestrel weather meter handy right on your belt or pack! Custom molded Kydex holster fits your 5500/5700 series units perfectly. They use either a High Strength hooked clip to attach securely to your belt, or a Molle Clip to attach to your Molle webbing on your pack or tripod accessories. They come in Black, Coyote, Grey, and OD colors. These are hand made in the USA!
- 1.5″ or 1.75″ belt clip or Molle Clip Options
- Coyote, Black, Grey, and OD colors
- Protects the buttons while in the holster
- High strength SAP engraved belt clip on belt models
- Tactical Tailor Malice Clip on Molle models
- Works for 5700, 5700 Elite, and 5500 units
- Made in USA
-
Gray Ops AMP Annealing Block
$82.00 Read moreFEATURES
- Machined from 6061 Aluminum
- Holds up to 6 AMP Annealing Pilots and 1 Brass Case holder
- Compatible with Gray Ops Reloading Base Stand
INCLUDED
- AMP Annealer Organization Block
- 4 Rubber Feet
-
-
Armageddon Gear “THE BRICK” Grippy Rear Bag
$59.00 Select options This product has multiple variants. The options may be chosen on the product pageArmageddon Gear introduces “THE BRICK,” a revolutionary rear shooting bag designed for optimal control and reduced fatigue. Featuring a robust “Grippy” rubberized texture, this gun bag locks your rifle stock firmly with the support surface for a rock-solid shooting position.
-
Gray Ops 6GT AW Magazine
$239.99 Read moreThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Armageddon Gear GARMIN XERO C1 PRO CASE – Ranger Green & CB Trim
$105.99 Read moreThe Garmin Xero C1 Pro has quickly become a critical piece of equipment. Keeps yours protected and close at hand with the new Armageddon Gear Garmin Xero Case. The Garmin Xero Case is basically a hard case sewn into 500d corudra nylon. The Case have over an inch of open cell foam padding, laminated to air mesh to keep the unit securely in place and protected, like in the chubby little hands of baby angels. As all of our products the Garmin Xero Case is made in America and guaranteed for life. Available in ranger green and black/grey.
-
Armageddon Gear Tripod Caddy (Multicam)
$249.99 Read moreEnhance your shooting experience with the Armageddon Gear Tripod Caddy. Designed to keep your match essentials within reach, this versatile piece of range gear offers a fold-down workspace, multiple compartments, and comes in a sleek grey color.
-
Gray Ops Ckye-Pod Clamp Adapter
$58.99 Read morePURPOSE:
- Replaces Ckye-Pod clamp making it universal to all Atlas compatible clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard black anodizing
- Includes shorter brass tipped panning set screw
- Adds 0.3125” in height
- Hole machined on bottom to accept the “pan-lock” some versions of Cyke Pod have
Installation:
- Remove existing clamp by loosening set screw on back of bipod
- Pull the clamp off the bipod and save the pull stud and wave washer
- Install the wave washer and pull stud into adapter
- Re-install adapter onto bipod by tightening the set screw on the bipod
- Make sure not to overtighten the pan-lock brass tipped set screw (very minimal pressure needed)
- Install Atlas compatible arca clamp
-
Armageddon Gear Ultra Light Shooting Mat Coyote Brown
$174.00 – $174.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Armageddon Gear Ultralight Shooting Mat is the perfect solution when you need a compact and lightweight mat!
-
Gray Ops CNC MasterPiece Arms BA Comp Side Rail Weights – Steel
$174.00 Add to cartPURPOSE
- Give the perfect balance point to your MPA BA Comp/Matrix/ESR Chassis when combined with the MPA Competition Side Rails
- Added weight Reduces recoil and adds stability
- Added locations for hand gripping
FEATURES
- Machined from 1018 cold rolled steel
- Black Nitride finish for superior corrosion and rust resistance
- Includes 4 weights (two weights per side)
- Each weight has 3 built in flush cup locations (12 total per kit) for each sling and accessory attachment
- Adds 27.4 ounces per 4 weight kit
- BA Comp Kit Dimensions roughly 0.6 x 0.6 x 5.25”
- Matrix/ESR/Matrix PRO Kit Dimensions roughly 0.5 x 0.6 x 6”
- Hardware to attach to side rails included
NOTE
- Side rails (shown in picture) purchased separately from MPA website must be installed to utilize these weights
-
ATLAS BT28: AFAR Rail Kit
$53.90 Read moreThe BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picatinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.
The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.
The 1913 Picatinny Rail is 2.05″ long and has a center to center spacing of 1.6″ with a 1.00″ radius back.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two 3/8″ fasteners and two 1/2″ fasteners. Available in black only.
- Length: 2.05″
- Weight: 0.89 ounces
-
Gray Ops MPA Matrix PRO – Internal Weight Kit
$234.99 Read morePURPOSE
- Add weight forward of the magazine for better balance
- Increase weight for added recoil reduction and spotting shots
FEATURES
- Machined Steel
- Black Nitride finish for corrosion/rust protection
- Includes 8 total weights (7 Regular/1 Contoured to accept Spigot mount)
- Includes Stainless Steel hardware
- Kit adds 30 ounces for forend
- 6 threaded holes per weight to allow location flexibility
- Installs without removing barreled action from chassis
-
Gray Ops Harris Bipod QDA
$84.99 Read morePURPOSE
- The Quick Detach Adapter allows a Harris notched leg bipod to use Atlas style feet/accessories. Different style feet can be changed out in seconds with no tools required. Perfect for competition or hunting scenarios where you must adapt to the specific task at hand.
- Eliminates the need to carry multiple bipods
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Set screw allows for a rigid, “no wiggle” lock-up on your Bipod
- Remove your atlas foot/accessory quick and easy with the spring loaded button
- Adds approximately 1” total height to the bipod
- Allen wrenched included for easy installation
-
Tab Gear Biathlon Sling with Flush Cups Reg Buckles
$169.99 Select options This product has multiple variants. The options may be chosen on the product pageThe solution to carrying a heavy rifle for long distances.
The padded shoulder straps distribute the weapon’s load to both shoulders, instead of one, resulting in less shooter fatigue after long periods of travel. Having the load centered on the back aids in maintaining better balance when using two hands for other tasks such as carrying a primary weapon, or navigating steep terrain.
The integrated shooting loop (available on the Regular and Elite models) can be deployed to allow the shooter to rapidly sling up for much steadier positional shooting.
Both straps are easily adjustable and utilize a buckle to make the sling fast and easy to remove if necessary.
The biathlon slings do not require a conversion kit in order to fit it to different rifles. You will need to just have additional attachments to fit your stock. So if you purchase a biathlon sling with Flush Cups and you have another rifle that requires HK hooks, you will just need to have a set of HK hooks.
FEATURES / SPECS
- 1.5″ Mil-Spec Webbing
- 1 ½” Fastex buckles or Elite Cobra buckles
- Elastic keepers secure adjustable strap ends
- Water resistant 1000D Cordura® shoulder straps
- Dual Layers of closed cell, waterproof, foam in the shoulders provide comfort and support
- User adaptability, shooter can change out swivels to fit different weapon systems
- Adjustable loop for shooting support (not available in Simple Sling)
- Made in Texas with US made materials!
- Lifetime Warranty
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart