-
BT46-NC PSR Atlas Bipod: Standard height
$391.40 Add to cartBT46-NC PSR Atlas Bipod: Standard height No Clamp
The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.
It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.
The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 5 – 9.4″ (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5″ diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11″
-
Gray Ops Ckye-Pod Clamp Adapter
$58.99 Add to cartPURPOSE:
- Replaces Ckye-Pod clamp making it universal to all Atlas compatible clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard black anodizing
- Includes shorter brass tipped panning set screw
- Adds 0.3125” in height
- Hole machined on bottom to accept the “pan-lock” some versions of Cyke Pod have
Installation:
- Remove existing clamp by loosening set screw on back of bipod
- Pull the clamp off the bipod and save the pull stud and wave washer
- Install the wave washer and pull stud into adapter
- Re-install adapter onto bipod by tightening the set screw on the bipod
- Make sure not to overtighten the pan-lock brass tipped set screw (very minimal pressure needed)
- Install Atlas compatible arca clamp
-
Rangefinder Extension Adapter GRAY OPS CNC
$94.99 Read moreNOTES:
Designed for rangefinders/optics without the anti-rotate pin
This product requires a 4-side dovetail adapter to be ARCA mounted. Can still be mounted to non-arca tripods via ¼-20 threaded hole in bottom
Some pictures shown with optional adapterPURPOSE:
Allows 3” of extra optic/accessory travel
Moves optic closer to edges of AMP PlatesFEATURES:
Machined from 6061 Aluminum
Type II Black Anodizing
Includes sliding ¼-20 captive screw
Extra ¼-20 threaded hole in bottom for different attachment methods -
5-H Atlas Bipod BT35-LW17
$681.00 Read more- Mounts directly to any 1913 style Picatinny rail via included CUSTOM ADM Lever.
- Height Range approximately 5.5 – 10.5″
- 15 degrees +/- of preloaded Pan.
- 15 degrees +/- of preloaded Cant.
- 5-H Pan and Cant can be locked out at top dead center
- PAN and CANT Tension Wheel has Detent adjustability and Cam-Lock
- PATENTED multiple deployable leg positions of 0, 45, 90, 135 and 180
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight 27.2 ounces.
- Footprint spread 14.5″– 19.5″
- Available in black only
- Made in America
-
Gray Ops AICS Magazine Base Pad
$39.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Gray Ops BR/Dasher AW Magazine
$239.99 Read moreThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Sale! Out of stock
OBi LINK SYSTEM — CLAMP LOCK WITH TEK-LOK
Original price was: $79.99.$63.99Current price is: $63.99. Read moreThe Clamp Lock with TEK-LOK attaches to your backpack or belt strap. Once mounted to your backpack or belt, you can connect any round or square posts.
—-NOTE—- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount —-
*CLAMP LOCK with TEK-LOK*
-Attaches to belt or 1.5-inch strap
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
*CLAMP LOCK*
–Bolts to the strap. Won’t ever move.
–Can be used on 1/2 inch – 1.5-inch strap.
–Can be used vertically or horizontally.
–4x mounting screws included.
-
Armageddon Gear Sticky Gamechanger Pint-Sized Standard fill
$194.99 Add to cartThe Sticky Game Changer® by Armageddon Gear®It’s no secret that we have been experimenting with revolutionary textiles that defy conventional capabilities for durability and downright tackiness. So what happens when you combine this new technology with the most winning shooting bag design in the precision rifle sports? The Sticky Game Changer® is born and here to take your stability up a notch or two. Derived from the superior stability offered from our exclusive waxed canvas shell, we applied our new sticky textile to strategic areas of the Game Changer® including the gusset, top, and a single side. The sticky textile provides shooters an unparalleled coefficient of friction to areas that contact shooting props, however the textile is not plagued with the Ultraviolet light sensitivity that breaks down common non-slip fabrics over time. Offered in both OG and Pint-sized configurations, the underlying waxed canvas shell is reinforced on specific panels with this indescribably sticky textile to provide a new perspective on what a shooting bag can do for you.Specifications: ·Waxed Canvas fabric shell comprises the main body in Tan colorLicensed Sticky fabric panels integrated in Graphite colorPint-Sized Sticky Game Changer® Attributes:Dimensions: 7”L x 4.5”w x 5”TWeight: (Sand Fill) 5 lbs.Weight: (Standard Bead Fill) 3 lbs.Weight: (Git-Lite Fill) 1.2 lbs.Handle: Single 1” Tan Wedding HandleSticky Game Changer® OG Attributes:Dimensions: 10″L x 7″T x 6″WWeight: 6+ lbs.Handle: Double 1.5” Tan Wedding HandlesFill Type: PolypropyleneZippered access to adjust fill to user desired ratio. Also offered in the New Git Lite lightweight fill! · -
Sale! Out of stock
Gray Ops CNC Hunter Tripod Plate
Original price was: $364.00.$345.80Current price is: $345.80. Read morePURPOSE:
- The bag stop was designed to give shooters the ability to “load” into their shooting bag while also preventing any contact to the mag which can cause feeding issues for the rifle. This is especially helpful for 22LR actions to feed reliably.
FEATURES:
- Mounts directly to any 1.5” arca rail via integral clamp
- Does not need to be “slid off” the end of the rail to remove
- One steel hex bolt for installing/removing or repositioning
- Machined from 6061 aluminum
- Black anodize finish
- Length designed for standard 10 round and extended magazines
- Weight – 2.6 ounces
-
Sale! Out of stock
Gray Ops CNC Bag Stop – Quick Detach
Original price was: $249.99.$239.00Current price is: $239.00. Read morePURPOSE:
- The bag stop was designed to give shooters the ability to “load” into their shooting bag while also preventing any contact to the mag which can cause feeding issues for the rifle. This is especially helpful for 22LR actions to feed reliably.
FEATURES:
- Mounts directly to any 1.5” arca rail via integral clamp
- Does not need to be “slid off” the end of the rail to remove
- One steel hex bolt for installing/removing or repositioning
- Machined from 6061 aluminum
- Black anodize finish
- Length designed for standard 10 round and extended magazines
- Weight – 2.6 ounces
-
Armageddon Top Zip Utility Pouch Coyote Brown
$82.99 Add to cartThe Armageddon Gear Top-Zip Utility Pouch is the perfect shave kit pouch for the traveling warrior who wants to maintain a dapper, yet tactical appearance at all times. Holds toothbrush, toothpaste, tactical beard grooming kit (AKA Copenhagen), hair clippers, Gold Bond, med tape, or any other combination of man-cream and hygiene items you can tote.
-
Gray Ops CNC – Brass Magneto Speed V3 Mount (Without ARCA Clamp)
$289.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
NOTE: This product does not come with the ARCA Clamp, for the mount with the clamp, please see Brass Magneto Speed V3 Mount With Clamp.
-
Gray Ops Spuhr Ring Turret Guards
$189.99 Add to cart     ***Only compatible with Spuhr Rings***
PURPOSE
- Added protection for your scope turrets
- Prevents ârolling a turretâ during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to âloadâ into
-
BT10-LW17 V8 Atlas Bipod
$398.00 Read more- Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
- Height Range approximately 4.75 – 9.0″.
- 15 degrees +/- of preloaded Pan.
- 15 degrees +/- of preloaded Cant.
- Leg positions are; stowed back, 45 degrees angled back, 90 degrees straight down, 45 degrees forward and stowed forward.
- Weight 12.7 ounces.
- Footprint spread 8″– 11″
- Available in black only
- Made in America
-
Sale!
OBi LINK SYSTEM — ROUND POST M-LOK Mini
Original price was: $55.99.$41.99Current price is: $41.99. Add to cartThe OBi Link System Round Post M-lok Mini is a smaller version of the regular-sized RPM. This mini M-Lok Post mounts to the M-lok slot on the forend of your rifle stock or any other piece of gear with an M-lok slot or similar hole spacing.
Once it is attached to your rifle or other equipment, it can connect to the Clamp Lock, Slide Lock, or Grip On Round.
-
Atlas 5-H & Super CAL BAS Ski Feet BT66
$134.90 Add to cartThe BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5″ 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.
Weight: 6.16 ounces
-
ATLAS BT22: Leg Extensions
$80.90 Read moreBT22: Atlas Leg Extensions
The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369
Weight: 1.8 ounces
Product will work on V8, PSR and CAL models only.
-
Gray Ops Harris BiPod ARCA Clamp Adapter
$178.99 Read morePURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart