- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
-
Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)
$269.99 Add to cartGet the perfect balance with External forend weights. Designed for M-Lok chassis with configurations similar to the MPA Matrix.
FEATURES
- Black Nitride finish
- Integral Flush cup
- Shaped to be support hand friendly during push/pull/press positional shooting
- Compatible with MPA internal weight kits on Matrix
- Full kit (6 weights) includes 4 short weights and 2 long weights
- Full kit adds just over 2.5 pounds (41 oz.)
- Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
- Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)
Available with all M-Lok Hardware
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
-
Gray Ops CNC – Brass Magneto Speed V3 Mount – Complete with Arca Clamp
$439.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount With ARCA Clamp allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
-
Gray Ops Brass Weights for Mini Plate V2
$62.99 Add to cartEnhance your shooting stability with the Brass Weights for Mini Plate V2 from Gray Ops CNC, an optional add-on that increases recoil reduction and grip by adding 12 ounces of weight.
-
Gray Ops AMP Annealing Block
$82.00 Read moreFEATURES
- Machined from 6061 Aluminum
- Holds up to 6 AMP Annealing Pilots and 1 Brass Case holder
- Compatible with Gray Ops Reloading Base Stand
INCLUDED
- AMP Annealer Organization Block
- 4 Rubber Feet
-
-
Sale!
Gray Ops Ckye-Pod ARCA Clamp Adapter
Original price was: $198.99.$188.00Current price is: $188.00. Add to cartPURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Armageddon Mini Plate Pro Pad – Standard Fill
$99.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Mini Plate Pro Pad is designed to perfectly match up to the Gray Ops Mini Plate Pro. The Mini Plate Pro Pad provides the user a small, light and extremely stable shooting platform while keeping both hands on the rifle. The Mini Plate Pro Pad is the perfect solution for building a stable shooting position in a small opening where the Gamechanger is too tall. The user can easily adjust the amount and type of fill with the built in fill spout. The Mini Plate Pro Pad comes filled with our standard poly bead fill.Please note; The Mini Plate Pro shown in the images is not included. This is the pad only – you’ll need to purchase the Mini Plate Pro separately. -
-
ATLAS BT28: AFAR Rail Kit
$53.90 Read moreThe BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picatinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.
The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.
The 1913 Picatinny Rail is 2.05″ long and has a center to center spacing of 1.6″ with a 1.00″ radius back.
Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two 3/8″ fasteners and two 1/2″ fasteners. Available in black only.
- Length: 2.05″
- Weight: 0.89 ounces
-
Gray Ops MPA Matrix PRO – Internal Weight Kit
$234.99 Read morePURPOSE
- Add weight forward of the magazine for better balance
- Increase weight for added recoil reduction and spotting shots
FEATURES
- Machined Steel
- Black Nitride finish for corrosion/rust protection
- Includes 8 total weights (7 Regular/1 Contoured to accept Spigot mount)
- Includes Stainless Steel hardware
- Kit adds 30 ounces for forend
- 6 threaded holes per weight to allow location flexibility
- Installs without removing barreled action from chassis
-
Gray Ops Harris Bipod QDA
$84.99 Read morePURPOSE
- The Quick Detach Adapter allows a Harris notched leg bipod to use Atlas style feet/accessories. Different style feet can be changed out in seconds with no tools required. Perfect for competition or hunting scenarios where you must adapt to the specific task at hand.
- Eliminates the need to carry multiple bipods
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Set screw allows for a rigid, “no wiggle” lock-up on your Bipod
- Remove your atlas foot/accessory quick and easy with the spring loaded button
- Adds approximately 1” total height to the bipod
- Allen wrenched included for easy installation
-
ATLAS BT23 Ski Feet
$80.90 Add to cartBT23: Atlas Ski Feet
The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only. NSN 1005-01-640-8881
Weight: 1.5 ounces
Product will work on V8, PSR and CAL models only.
-
BT46-NC PSR Atlas Bipod: Standard height
$391.40 Add to cartBT46-NC PSR Atlas Bipod: Standard height No Clamp
The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.
It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8″ flathead socket screws. Available in black only.
The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 5 – 9.4″ (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5″ diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11″
-
Gray Ops Ckye-Pod Clamp Adapter
$58.99 Add to cartPURPOSE:
- Replaces Ckye-Pod clamp making it universal to all Atlas compatible clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard black anodizing
- Includes shorter brass tipped panning set screw
- Adds 0.3125” in height
- Hole machined on bottom to accept the “pan-lock” some versions of Cyke Pod have
Installation:
- Remove existing clamp by loosening set screw on back of bipod
- Pull the clamp off the bipod and save the pull stud and wave washer
- Install the wave washer and pull stud into adapter
- Re-install adapter onto bipod by tightening the set screw on the bipod
- Make sure not to overtighten the pan-lock brass tipped set screw (very minimal pressure needed)
- Install Atlas compatible arca clamp
-
Rangefinder Extension Adapter GRAY OPS CNC
$94.99 Read moreNOTES:
Designed for rangefinders/optics without the anti-rotate pin
This product requires a 4-side dovetail adapter to be ARCA mounted. Can still be mounted to non-arca tripods via ¼-20 threaded hole in bottom
Some pictures shown with optional adapterPURPOSE:
Allows 3” of extra optic/accessory travel
Moves optic closer to edges of AMP PlatesFEATURES:
Machined from 6061 Aluminum
Type II Black Anodizing
Includes sliding ¼-20 captive screw
Extra ¼-20 threaded hole in bottom for different attachment methods -
5-H Atlas Bipod BT35-LW17
$681.00 Read more- Mounts directly to any 1913 style Picatinny rail via included CUSTOM ADM Lever.
- Height Range approximately 5.5 – 10.5″
- 15 degrees +/- of preloaded Pan.
- 15 degrees +/- of preloaded Cant.
- 5-H Pan and Cant can be locked out at top dead center
- PAN and CANT Tension Wheel has Detent adjustability and Cam-Lock
- PATENTED multiple deployable leg positions of 0, 45, 90, 135 and 180
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight 27.2 ounces.
- Footprint spread 14.5″– 19.5″
- Available in black only
- Made in America
-
Gray Ops CNC – Brass Magneto Speed V3 Mount (Without ARCA Clamp)
$289.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
NOTE: This product does not come with the ARCA Clamp, for the mount with the clamp, please see Brass Magneto Speed V3 Mount With Clamp.
-
Gray Ops Spuhr Ring Turret Guards
$189.99 Add to cart     ***Only compatible with Spuhr Rings***
PURPOSE
- Added protection for your scope turrets
- Prevents ârolling a turretâ during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to âloadâ into
