Shop | Insite Arms

“MasterPiece Arms ( MPA ) 2 round holder” has been added to your cart. View cart

Out of stock
Gray Ops 6GT AW Magazine
$239.99 Read more

The Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
Out of stock
Armageddon Gear GARMIN XERO C1 PRO CASE – Ranger Green & CB Trim
$105.99 Read more

The Garmin Xero C1 Pro has quickly become a critical piece of equipment. Keeps yours protected and close at hand with the new Armageddon Gear Garmin Xero Case. The Garmin Xero Case is basically a hard case sewn into 500d corudra nylon. The Case have over an inch of open cell foam padding, laminated to air mesh to keep the unit securely in place and protected, like in the chubby little hands of baby angels. As all of our products the Garmin Xero Case is made in America and guaranteed for life. Available in ranger green and black/grey.
Armageddon Mini Plate Pro Pad – Standard Fill
$99.99 Select options This product has multiple variants. The options may be chosen on the product page

DESCRIPTION

The Mini Plate Pro Pad is designed to perfectly match up to the Gray Ops Mini Plate Pro. The Mini Plate Pro Pad provides the user a small, light and extremely stable shooting platform while keeping both hands on the rifle. The Mini Plate Pro Pad is the perfect solution for building a stable shooting position in a small opening where the Gamechanger is too tall. The user can easily adjust the amount and type of fill with the built in fill spout. The Mini Plate Pro Pad comes filled with our standard poly bead fill.

Please note; The Mini Plate Pro shown in the images is not included. This is the pad only – you’ll need to purchase the Mini Plate Pro separately.
Gray Ops CNC Precision Scope Mount Bubble Level
$81.00 Add to cart

Eliminate rifle “cant” with the direct attach bubble level designed specifically for the Gray Ops CNC Precision Scope Mount. When attached via our tight locking V-Groove design, this bubble level is visible just over the left or right side scope parallax/windage knob when viewing through the scope. Making it easy to stay in the scope and still view the bubble level. Mounts on either the left or right side of the ring accommodating both left and right handed shooters.

(mounting screws included)

Weight: 0.3 Oz
Out of stock
Armageddon Gear Tripod Caddy (Multicam)
$249.99 Read more

Enhance your shooting experience with the Armageddon Gear Tripod Caddy. Designed to keep your match essentials within reach, this versatile piece of range gear offers a fold-down workspace, multiple compartments, and comes in a sleek grey color.
Armageddon Gear Trojan Rifle Cover
$139.99 Select options This product has multiple variants. The options may be chosen on the product page

The Trojan Rifle Cover is a prescription-strength remedy for those embarrassing moments when projectile malfunction keeps you down.
Sale!
MasterPiece Arms ( MPA ) 2 round holder
Original price was: $24.99.Current price is: $19.99. Add to cart
This new 2 Round Holder is designed to fit onto any MPA BA Competition, Standard Chassis, Hybrid, CSR or BA Lite. This is designed for Short Action Calibers with a 0.472 bolt face. (308, 6.5 Creedmoor, 6.5×47 Lapua, 6 Dasher, 6 BR, etc, etc).

The design of the holder presents the round at a slight angle, making it easier for the shooter to grab hold of the back of the cartridge for quick removal.

The system attaches to any of the six oblong slots on either side of the magazine well.
1. Using an Allen wrench, loosen the set screw in the “Chassis Mount” component and slide the unit out of the oblong slot.
2. Tighten the set screw to secure the Chassis Mount component into the oblong slot.
3. Attach the 2 Round Holder to the Chassis mount via the button head cap screw that is included.
Fix It Sticks BRASS HAMMER HEAD
$15.99 Add to cart
BRASS HAMMER HEAD

designed to integrate with the Fix It Sticks System. Steel insert in base enables them to be used with magnetic drivers.

Note: T-Handle Driver not included
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.

Integrates perfectly with T-Way Wrench for shop use.
Out of stock
Fix It Sticks Spuhr Approved 25-45 inch Pound Torque Limiter Set
$149.99 Read more
Gray Ops MPA BA Chassis External Weights Full Kit ( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)
$269.99 Add to cart
Out of stock
Gray Ops Die Block
$77.99 Read more
Fix It Sticks CLEANING ROD KIT
$156.99 Add to cart
Please note that for the Cleaning Rod Kit to work either a Modular T-Drive or single Fix It Stick is required.

Expand the functionality of your Fix It Sticks.

Compact cleaning rod / bore obstruction kit features precision machined stainless steel rods and interchangeable brass adapters (for both .22 and .30) to protect the rifle bore.

Double ball bearing adapter ensures a smooth operation and enables the cleaning attachments to follow the bore’s rifling.

Assembles up to 44 inches.

Kit Contains:
- Six precision machined stainless steel rods (8-32 thread)
- Six .22 caliber brass bore adapters
- Six .30 caliber brass bore adapters
- .22 caliber obstruction tip
- .30 caliber obstruction tip
- Double ball bearing drive adapter
- Carrying Case
Out of stock
Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) SHORT Action HUNTER
$369.00 Read more

The Hunter Detachable Box Magazine (DBM) bottom metal is designed for shooters that are looking for a flush mounted bottom metal that will accept AICS pattern magazines. The bottom metal is machined from a single piece of billet 6061 and features a patented cantilever spring mag release system that will not open under heavy recoil. The magazine release is also adjustable, sleek and all but impossible to actuate accidentally.

The Hunter DBM is made to fit into an M5 inlet. It is available for Remington 700 actions, and all Remington 700 clones. Comes with pillars and action screws.

Short Action Weight: 3 Ounces / Long Action Version Under Development
Insite Arms Long Sleeve Crew Tri-Blend Grey
$44.99 Select options This product has multiple variants. The options may be chosen on the product page
Armageddon Gear Ultra Light Shooting Mat Coyote Brown
$174.00 – $174.99 Select options This product has multiple variants. The options may be chosen on the product page

The Armageddon Gear Ultralight Shooting Mat is the perfect solution when you need a compact and lightweight mat!
Out of stock
FIX IT STICKS Large Torque Limiter 65 INCH LBS FISTL65
$54.99 Read more
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 5,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
Out of stock
Lapua 4PH6046: 6mm BR Norma Lapua Cases 100/Box
$179.99 Read more

Lapua LU4PH6046 6mm BM Norma Lapua Cases 100/box

The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
The most precise cases on the market

Lapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
Lapua cases are manufactured to be reloaded, again and again, dozens of times.
Case construction
Base
The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
Body
The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
Neck
Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading.
Out of stock
SPUHR SP-4001C Ø34 H30mm 0MIL PIC
$559.00 Read more

Article no.: SP-4001

0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion.

Share
BIX’N ANDY TRIGGER TAC SPORT TWO STAGE LEFT OR RIGHT TOP SAFETY FOR REMINGTON 700 AND CLONES
$349.00 – $354.00 Select options This product has multiple variants. The options may be chosen on the product page

For the first time Bix’n Andy comes to the sporting and tactical rifle with the TacSport Rem700 Trigger Pull Force can be set as low as 10 ounces and all the way up to 4.5 pounds Extra Feature: To work the safety move it slightly outwards and then forward. This can be changed so you only have to push it forward by removing a pin. The Bolt Stop Release is removable Available in Single & Two-Stage configurations as well as Left or Right Top Safeties in each configuration. THIS IS THE TWO STAGE MODEL AT THIS TIME WE DON’T RECOMMEND THESE TRIGGERS FOR SURGEONS AND BIG HORN TL-3. THERE HAVE BEEN ISSUES WITH THE SEAR ENGAGEMENT.
Out of stock
OBi Cush Pad for MDT Chassis
$84.99 Read more
We’ve designed a super soft buttpad made out of high-quality polyurethane elastomer to provide added comfort when shooting while maintaining accuracy and reducing recoil.
- Designed to fit MDT Chassis
- Reduces recoil
- Quality weather resistant and temperature stable material
- Made from shock absorbing elastomer material to dampen recoil and vibration
- Rubber keeps stock securely positioned against your shoulder not like plastic
Out of stock
FIX IT STICKS Small Torque Limiter 18 INCH LBS FISTL18
$54.99 Read more
Torque Limiter prevents over-tightening of fasteners

When Inch Lbs is reached:
- Audible “Click” is heard.
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.