-
Fix It Sticks CLEANING ROD KIT
$156.99 Read morePlease note that for the Cleaning Rod Kit to work either a Modular T-Drive or single Fix It Stick is required.
Expand the functionality of your Fix It Sticks.
Compact cleaning rod / bore obstruction kit features precision machined stainless steel rods and interchangeable brass adapters (for both .22 and .30) to protect the rifle bore.
Double ball bearing adapter ensures a smooth operation and enables the cleaning attachments to follow the bore’s rifling.
Assembles up to 44 inches.
Kit Contains:
- Six precision machined stainless steel rods (8-32 thread)
- Six .22 caliber brass bore adapters
- Six .30 caliber brass bore adapters
- .22 caliber obstruction tip
- .30 caliber obstruction tip
- Double ball bearing drive adapter
- Carrying Case
-
Insite Arms Men’s Vintage Hoodie 2 Color Options Solid Gray / Two-Tone Gray
$69.99 – $94.99 Select options This product has multiple variants. The options may be chosen on the product page -
Armageddon Gear “THE BRICK” Grippy Rear Bag
$59.00 Select options This product has multiple variants. The options may be chosen on the product pageArmageddon Gear introduces “THE BRICK,” a revolutionary rear shooting bag designed for optimal control and reduced fatigue. Featuring a robust “Grippy” rubberized texture, this gun bag locks your rifle stock firmly with the support surface for a rock-solid shooting position.
-
Lapua 4PH7226: .308 Win Palma Small Rifle Primer Cases 100/Box
$194.99 Add to cartLapua 308 Win. SRP PALMA Cases 100/box
The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
The most precise cases on the marketLapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
Lapua cases are manufactured to be reloaded, again and again, dozens of times.
Case construction
Base
The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
Body
The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
Neck
Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading. -
Bix’n Andy TacSport PRO Rem700 Single Stage Trigger – Top Right Safety – Smooth Curve Shoe
$399.00 Read moreThe TacSport Pro is the latest addition to our TacSport line. It was developed to meet the growing needs of our customers that wanted a trigger that was great in rugged condition like our TacSport and also has an even lower pull weight. Designed to operate in Remington 700 and compatible actions, the new triggers will have an adjustable pull force between 3.5 ounces to 35 ounces (100 grams to 1,000 grams). The ball system allows for the lowest reset force of any trigger, thereby improving accuracy and allowing for a very crisp let-off. The TacSport is machined from stainless steel with a housing designed to further protect the mechanism from the elements and will come standard with a safety lever and a removable bolt stop.
-
Gray Ops 6GT AW Magazine
$239.99 Read moreThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Armageddon Gear GARMIN XERO C1 PRO CASE – Ranger Green & CB Trim
$105.99 Read moreThe Garmin Xero C1 Pro has quickly become a critical piece of equipment. Keeps yours protected and close at hand with the new Armageddon Gear Garmin Xero Case. The Garmin Xero Case is basically a hard case sewn into 500d corudra nylon. The Case have over an inch of open cell foam padding, laminated to air mesh to keep the unit securely in place and protected, like in the chubby little hands of baby angels. As all of our products the Garmin Xero Case is made in America and guaranteed for life. Available in ranger green and black/grey.
-
Gray Ops CNC Precision Scope Mount Bubble Level
$81.00 Read moreEliminate rifle “cant” with the direct attach bubble level designed specifically for the Gray Ops CNC Precision Scope Mount. When attached via our tight locking V-Groove design, this bubble level is visible just over the left or right side scope parallax/windage knob when viewing through the scope. Making it easy to stay in the scope and still view the bubble level. Mounts on either the left or right side of the ring accommodating both left and right handed shooters.
(mounting screws included)
Weight: 0.3 Oz
-
Armageddon Gear Tripod Caddy (Multicam)
$249.99 Read moreEnhance your shooting experience with the Armageddon Gear Tripod Caddy. Designed to keep your match essentials within reach, this versatile piece of range gear offers a fold-down workspace, multiple compartments, and comes in a sleek grey color.
-
Fix It Sticks BRASS HAMMER HEAD
$15.99 Add to cartBRASS HAMMER HEAD
designed to integrate with the Fix It Sticks System. Steel insert in base enables them to be used with magnetic drivers.
Note: T-Handle Driver not included
- Choose 3/16″ for Remington 700, AICS, etc.
- Choose 5/32″ for Ruger 10/22 V-Block, etc.
- Choose 5/64″ for general use
- Choose 1/8″ for KIDD, etc.
- Choose 5mm for Action Screws
- Choose T30 for numerous Precision Rifles (T30 is not a Ball End)
- Shaft of bit is 0.1875″ X 4.0″ long for hard to reach screws.
- Works with any standard 1/4″ bit driver
Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
Integrates perfectly with T-Way Wrench for shop use.
-
Hawkins Precision M5 Detachable Box Magazine Assembly (DBM) SHORT Action HUNTER
$369.00 Read moreThe Hunter Detachable Box Magazine (DBM) bottom metal is designed for shooters that are looking for a flush mounted bottom metal that will accept AICS pattern magazines. The bottom metal is machined from a single piece of billet 6061 and features a patented cantilever spring mag release system that will not open under heavy recoil. The magazine release is also adjustable, sleek and all but impossible to actuate accidentally.
The Hunter DBM is made to fit into an M5 inlet. It is available for Remington 700 actions, and all Remington 700 clones. Comes with pillars and action screws.
Short Action Weight: 3 Ounces / Long Action Version Under Development
-
Insite Arms Long Sleeve Crew Tri-Blend Grey
$44.99 Select options This product has multiple variants. The options may be chosen on the product page -
Armageddon Gear Ultra Light Shooting Mat Coyote Brown
$174.00 – $174.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Armageddon Gear Ultralight Shooting Mat is the perfect solution when you need a compact and lightweight mat!
-
FIX IT STICKS Large Torque Limiter 65 INCH LBS FISTL65
$54.99 Read moreTorque Limiter prevents over-tightening of fasteners
When Inch Lbs is reached:
- Limiter “spins” preventing further torque from being applied.
Features
- Accepts any standard 1/4″ bit
- Fits into any standard 1/4″ driver
- +/- 6% Accuracy
- Retains accuracy for 5,000 cyclesIntegrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.Integrates perfectly with T-Way Wrench for shop use.
-
SPUHR SP-4001C Ø34 H30mm 0MIL PIC
$559.00 Read moreArticle no.: SP-4001
0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion. -
BIX’N ANDY TRIGGER TAC SPORT TWO STAGE LEFT OR RIGHT TOP SAFETY FOR REMINGTON 700 AND CLONES
$349.00 – $354.00 Select options This product has multiple variants. The options may be chosen on the product pageFor the first time Bix’n Andy comes to the sporting and tactical rifle with the TacSport Rem700 Trigger Pull Force can be set as low as 10 ounces and all the way up to 4.5 pounds Extra Feature: To work the safety move it slightly outwards and then forward. This can be changed so you only have to push it forward by removing a pin. The Bolt Stop Release is removable Available in Single & Two-Stage configurations as well as Left or Right Top Safeties in each configuration. THIS IS THE TWO STAGE MODEL AT THIS TIME WE DON’T RECOMMEND THESE TRIGGERS FOR SURGEONS AND BIG HORN TL-3. THERE HAVE BEEN ISSUES WITH THE SEAR ENGAGEMENT.
-
Armageddon Gear 58″ Precision Rifle Case
$289.99 Select options This product has multiple variants. The options may be chosen on the product pageThe 58″ Armageddon Gear Precision Rifle Case is perfect for suppressed precision rifles. No more unscrewing your suppressor to case your rifle or leaving the butt of the rifle hanging out an open zipper that can’t be closed!
-
OBi Cush Pad for MDT Chassis
$84.99 Read moreWe’ve designed a super soft buttpad made out of high-quality polyurethane elastomer to provide added comfort when shooting while maintaining accuracy and reducing recoil.- Designed to fit MDT Chassis
- Reduces recoil
- Quality weather resistant and temperature stable material
- Made from shock absorbing elastomer material to dampen recoil and vibration
- Rubber keeps stock securely positioned against your shoulder not like plastic
-
Gray Ops CNC Accessory Pic Rail – Long
$109.99 Add to cartLong picatinny rail for Precision Scope Mount accessory interface (screws included)
Attaches to multiple V-Groove interface locations. Tightly and repeatably aligns to the mount.
Length: 4.12″
Height above Mount: 1.00″
Weight: 1.9 Oz
Suggested Torque: 50 in-lb
- 2021 Insite Arms
- Terms & Conditions
- Privacy Policy
- Edmonton Web Design
- Edmonton SEO
Shopping Cart