Categories

Filter
  • Placeholder

    Order #25527]

     $229.99 Add to cart
  • HRD GEAR 6MM MAGAZINE SPACER KIT Out of stock

    HRD GEAR 6MM MAGAZINE SPACER KIT

     $68.99 Read more

    The HRD GEAR 6mm magazine spacer kit is designed to make the popular 6BR case and it’s variant cases run flawlessly in the AW/AX magazines (part numbers 0726 and 6677).  The back spacer is a press fit and clips into place from the top of the mag. There is a small hole to aid in removal of the back spacer (the tip of a bullet fits perfectly).  THERE ARE NO TOOLS OR MODIFICATIONS NEEDED OR REQUIRED TO INSTALL THIS SPACER KIT.

  • Tab Gear Sling Thing

    Tab Gear Sling Thing

     $18.99 Select options This product has multiple variants. The options may be chosen on the product page

    How many times have you needed to zero your scope turrets, and either didn’t have or couldn’t find, the wrenches handy to do the job? If you shoot a scoped rifle chances are you’ve been in this situation before, probably several times.

    If you have an illuminated reticle have you ever tried to turn it on only to find that the battery is dead? Maybe it’s been in a while and you figure it’s about time to change it out, but you can’t remember where you stashed the spare battery.

    We’ve come out with a handy little item to take care of both of those troublesome situations so you won’t have to worry about either of them any more.

    There is room for four Allen / Torx wrenches in the two slot pockets and a pocket to hold your illuminated reticle battery. The elastic on the back of the Sling Thing allows you to thread it onto your sling anywhere and the Sling Thing is always there yet out of the way, until you need your tools or battery. The Sling Thing closes securely with Velcro.

    We are offering the Sling Thing in our three main colors, Coyote Brown, OD Green, and Black.

    Features:

    • Room for four Allen / Torx wrenches in the two slot pockets
    • Pocket to hold your illuminated reticle battery
    • Elastic backing to thread onto your sling anywhere
    • Velcro adjustment to keep closed securely
    • Always there yet out of the way until needed
  • Gray Ops MPA BA Adjustable Thumbrest Out of stock

    Gray Ops MPA BA Adjustable Thumbrest

     $62.99 Read more

    Made specifically for the MPA BA Competition chassis.

    • Multiple mounting locations in any of the “Oval” slots down the forend
    • Compatible with or without MPA Internal Weights
    • Made from 6061 Aluminum and hard black anodized
    • Ergonomic thumbshelf contoured for maximum comfort
    • Increased  stability for support hand
    • Ambidextrous for right handed or left handed shooters
  • The "Heathen" Muzzle Brake "LITE" 0.885 6.5CAL 5/8x24 Out of stock

    The “Heathen” Muzzle Brake “LITE” 0.885 6.5CAL 5/8×24

     $225.00 Read more

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The Heathen was specifically designed to produce minimal blast and disturbance directed toward the shooter and spotter reducing fatigue, ground debris disturbance and muzzle jump.

  • MasterPiece Arms BA COMP Chassis COMPLETE Weight Tuning KIT - MPA

    MasterPiece Arms BA COMP Chassis COMPLETE Weight Tuning KIT – MPA

     $229.99 Add to cart

    The Complete Weight Tuning Kit for the full size BA/Comp Chassis & ESR Chassis includes the following:

    • Steel Enhanced Bag Rider – 1.2 lbs
    • Steel Monopod Weight – 1 lb
    • Front Fore-end Weight – 1.2 lbs
    • Rear Fore-end Weight – 1 lb
    • 8 Front Fore-end clamps
    • 8 Button Head Cap Screws for the clamps
    • Fasteners for Attaching the Bag Rider and Monopod Weight
  • Sale! MasterPiece Arms Matrix Chassis

    MasterPiece Arms Matrix Chassis

     $1,449.00 – $1,860.00 Select options This product has multiple variants. The options may be chosen on the product page

    This is and enhanced version version of our highly successful BA Chassis System.

    The Matrix Chassis was designed as a the most revolutionary chassis ever produced. With the multitude of configurations in grips, thumb rests and trigger finger supports, the primary interface between the shooter and the rifle (the grip) has over 100 different options. Please refer to the photos above to see our data on shooter preference on the grips, thumb rests, and trigger finger supports.

  • Insite Arms Loading Block 100 ct. Bullet Tray

    Insite Arms Loading Block 100 ct. Block with Bullet Tray

     $199.00 Select options This product has multiple variants. The options may be chosen on the product page

    Milled from a solid 18″ 1″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred

    – Includes a generous sized Bullet or Parts tray for convenience.

    • 5 size options for cartridge chamberings

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 18″x 6″x 1″

     

  • Lapua 4PH6046: 6mm BR Norma Lapua Cases 100/Box Out of stock

    Lapua 4PH6046: 6mm BR Norma Lapua Cases 100/Box

     $179.99 Read more

    Lapua LU4PH6046 6mm BM Norma Lapua Cases 100/box

    The base, body and neck of the Lapua cases have been designed to maintain exact tolerances over multiple reloading cycles. Advanced metallurgical research and manufacturing techniques ensure that Lapua cases are leaders in uniformity and quality.
    The most precise cases on the market

    Lapua cases are the best in the world. The marksmen themselves think this way. The .220 Russian, for example, is the number one choice of the best benchrest shooters all over the world. All our cases are strong and uniformly precise.
    Lapua cases are manufactured to be reloaded, again and again, dozens of times.
    Case construction
    Base
    The base section is hard and strong, and the dimensions remain constant and will hold primers tight in primer pocket even after repeated reloading.
    Body
    The brass body section is hard and firm. It is easy to extract after firing, whether full sizing or only neck sizing was used in reloading.
    Neck
    Strict tolerances in concentrity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading.

  • US Optics Ext Cant Indicator Rail Mounted Swivel Bubble Level BBL Out of stock

    US Optics Ext Cant Indicator Rail Mounted Swivel Bubble Level BBL

     $174.99 Read more

    US Optics Ext Cant Indicators with Swivel Bubble Level available for Picatinney or Weaver (Rail Mounted Style) and 30mm Rings (Ring Mounted). Screw on cover protects glass vial from damage when not in use. Those Riflescope Ext Cant Indicators by U.S.Optics include cover. USO Rail Mounted Swivel Bubble Level Ext Cant Indicator (Contoured) attaches to your Picatinny Base. U.S. Optics Ring Mounted Swivel Bubble Level Ext Cant Indicator attaches to your 30mm scope tube. Screw on cover of those USOptics Ext Cant Indicators protects the glass vial from damage when not in use. Level folds away 90 degrees when not in use. Made from 6061-T6 and Type III Hard Black Anodized.

  • Sale! Bushnell LEGEND TACTICAL 15-45x 60mm T Series Mil-Hash -781545ED Out of stock

    Bushnell LEGEND TACTICAL 15-45x 60mm T Series Mil-Hash -781545ED

     Original price was: $899.00.Current price is: $869.00. Read more

    Built on the groundwork laid by Bushnells original Excursion FLP spotting scopes, the new Legend T Series 15-45x 60mm FLP Spotting Scope with Mil-Hash line reticle delivers exceptional field performance, a bright razor sharp image and a 100% waterproof design that excels in the most unforgiving conditions. The Folded Light path (FLP) design provides the benefits of a long focal length optical path in a relatively short, compact chassis. The ED Prime Extra Low Dispersion glass, fully multi-coated optics, and premium BaK-4 Prisms capture the moment with vivid clarity and contrast, even in low light conditions. Lenses are protected by the ultra-effective Rainguard HD hydrophobic coating, for the clearest possible view in the face of foul weather or condensation from breath. The compact design is lightweight and sets up quickly and easily. It features a reverse eyepiece for minimal exposure and a twist-out eyecup for comfort and optimal eye relief. It also has tactical rails on the top and sides. Features the new Bushnell No Questions Asked Lifetime Warranty. Includes nylon protective in use case and lens caps.

    Features:

    • Mil-Hash Reticle
    • Twist-up eyecups
    • Picatinny rail mounts
    • 100% waterproof
    • Rainguard HD
    • Mil-Hash reticle
    • First focal plane
  • Vihtavuori Premium N565 Reloading Powder - 1kg Out of stock

    Vihtavuori Premium N565 Reloading Powder – 1kg

     $169.00 Read more

    N565 – THE RIFLE POWDER FOR LONG RANGE SHOOTING

    Designed to fill the gap between Vihtavuori N560 and N570 high energy rifle powders, the N565 was created specifically for the .338 Lapua Magnum with 250 gr bullets. In addition to a precisely tailored burn rate, this powder is extremely temperature stable, giving uniform results across a wide range of environments. We’ve also incorporated improved hygroscopic stability and our new decoppering agent to ensure a cleaner barrel when shooting. N565 is REACH compliant without DNT or phthalates.

    Physically, N565 grains have the same size as those of the N560 powder. As all Vihtavuori powders, it flows smoothly through powder measures and ensures good loadability and uniformity. The burn rate of the powder is a bit closer to N570, roughly splitting the difference between the two. Vihtavuori N565 is a single perforated extruded powder, having a bulk density of 960 g/l and an energy content of 4000 J/g.

    While N565 was developed specifically for military sniping applications, it also has a wide range of sporting uses, particularly within long range shooting and ELR. The N565 has proven to be an ideal choice for calibers such as the 7mm Rem. Magnum, the .30-06, .300 Win Mag, .300 Norma Mag as well as the .338 Norma Mag.

  • Gray Ops Hybrid M-Lok Weight

    Gray Ops Hybrid M-Lok Weight

     $179.99 Add to cart

    Get the most customizable balance with the HYBRID M-LOK weights.  Designed for all M-Lok configurations using 3 or more M-LOK slots.

    FEATURES

    • Hard Black Anodize finish
    • Integral Flush cup
    • 2 exterior M-LOK accessory slots per weight (ie. pic rails, thumbrests)
    • Recoil reducing serrated grips along the bottom of each weight that provide an added friction surface
    • Shaped to be support hand friendly during push/pull/press positional shooting
    • Brass Pair – adds 1.1 pounds (16.8 oz.)
    • Aluminum Pair – adds 0.52 pounds (8.32 oz.)
    • Dimensions – 4.674″ x 0.52″ x 1.228″ (Covers 3 M-Lok slots)
    • Sold in pairs
    • All M-Lok Hardware included

    Available with hardware compatible with MPA Matrix and ESR Internal weights

    Not compatible with MPA Side Rails, MPA Matrix Pro Chassis, or MPA BA Comp Chassis

  • Bix’n Andy TacSport Trigger Shoe 90 Degree

    Bix’n Andy TacSport Trigger Shoe 90 Degree

     $49.99 Add to cart

    The shooters asked and Bix’n Andy answered!

    These exchangeable trigger shoes are for shooters that want to customize their trigger experience.  Four different styles to choose from and they’re easy to swap out.

    The Smooth Curved Shoe is what the Bix’n Andy Benchrest triggers use.  It is wider than the original TacSport shoe and is an absolute favorite among shooters around the world.

    The Gator Grip is the same width as the Competition shoe, but has a very appealing gator traction machined into the aluminum trigger shoe.  This traction is very satisfying to the touch and provides an extra sense of touch when utilizing a light trigger pull weight in a tactical competition or cold hunting conditions.

    Hunters around the world have come to enjoy a ribbed trigger shoe.  This smooth, wide shoe has 3 grooved ribs machined into the surface that offers a nice sense of finger location on the trigger.

    Finally, the 90º shoe is a wide and straight shoe that tactical shooters have come to love in many competition shooting disciplines.  This shoe is vertical in relation to the rifle receiver and has a nice hook on the bottom to offer better finger orientation on the shoe.

  • ATLAS BT17: 4" 1913 Picatinny Rail Out of stock

    ATLAS BT17: 4″ 1913 Picatinny Rail

     $47.10 Read more

    The BT17 – 4″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).

    A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 1.20 ounces

  • Bix’n Andy – Dakota Trigger, Tikka T3 Out of stock

    Bix’n Andy – Dakota Trigger, Tikka T3

     $339.99 Read more
    The Bix’n Andy Dakota trigger for the Tikka T3 series of rifles brings you the performance and durability that has raised the industry standard for over 10 years!
    The searless trigger design delivers the greatest reliability in all conditions. From mud to snow and even the roughest dust storm, this trigger will provide a perfect ignition break.
    Bix’n Andy had the Badlands of the Dakotas and demands of all American shooters in mind when designing this trigger for the Tikka T3 platform.
    The Dakota is user adjustable with a single screw adjustment between 1 and 4.5 pounds of precise pull.
    The Tikka T3 Dakota Trigger comes standard with a safety and bolt release. The housing can be easily opened for cleaning and general maintenance for when you get home from a dusty match or muddy expedition, self-eliminating any doubt your rifle is ready for the next shot.
    Fully Weather Resistant so that you can perform at your best no matter what mother nature throws at you.
    Searless Design ensures simplicity and total reliability.
    Single Stage trigger mechanism with a crisp ignition break.
    Tikka T3 Series compatibility.
    Ideal Over-Travel so that you do not interfere with the rifle’s position during fire.
    Patented Ball Bearing Design with lifetime support guarantee.
    100% Precision Machined Parts.
    1 lbs – 4.5 lbs or 450g – 2,000g Pull Weight adjusted by a single screw while the action is still bedded in the stock.
  • Gray Ops Outdoorsman Arca Adapter

    Gray Ops Outdoorsman Arca Adapter

     $54.99 Add to cart

    NOTES:

    • This product only works with Outdoorsmans Binocular Mounts and is specifically designed with custom anti-rotate pins for exact fitment.
    • Does not include Outdoorsmans Binocular Mount

    PURPOSE:

    • Attach to bottom of Outdoorsmans Bino Mounts for a true Anti-rotate arca adapter

    FEATURES:

    • Machined from 6061 Aluminum
    • Hard Black Anodizing
    • 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
    • Works with any standard 1.5” Arca clamp
    • Low profile design
    • Custom machined anti-rotate pins to fit Outdoorsmans Bino Mount
    • Includes “captured” 1/4-20 screw
  • Insite Arms Barrel Tuner - For 1.125" Heathen 3/4 x 24 , 18x1, 3/4x20 thread Black Nitride

    Insite Arms Barrel Tuner – For 0.995″ Heathen 5/8×24 thread Black Nitride

     $200.00 Add to cart

    Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

    The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.

     

  • Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long - MATRIX FIT with Screws

    Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)

     $269.99 Add to cart

    Get the perfect balance with External forend weights.  Designed for M-Lok chassis with configurations similar to the MPA Matrix.

    FEATURES

    • Black Nitride finish
    • Integral Flush cup
    • Shaped to be support hand friendly during push/pull/press positional shooting
    • Compatible with MPA internal weight kits on Matrix
    • Full kit (6 weights) includes 4 short weights and 2 long weights
    • Full kit adds just over 2.5 pounds (41 oz.)
    • Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
    • Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)

    Available with all M-Lok Hardware

    • Short Pair (2 Short weights)
    • Long Pair (2 Long weights)
    • Full Kit (4 Short weights and 2 Long weights)

    Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)

    • Short Pair (2 Short weights)
    • Long Pair (2 Long weights)
    • Full Kit (4 Short weights and 2 Long weights)
  • FIX IT STICKS REPLACEABLE VERSION - SHOOTING & HUNTING EDITION W/ BRACKET FISRSH16

    FIX IT STICKS REPLACEABLE VERSION – SHOOTING & HUNTING EDITION W/ BRACKET FISRSH16

     $49.99 Add to cart

    The Fix It Sticks Replaceable Edition Shooting / Hunting offers unmatched portability, functionality and versatility.  Two Fix It Sticks (which combine to form a T-Handle) and 16 bits are held in a molded bracket for portability / storage.  Extra room on each end can hold two additional bits.

    Replaceable Set includes two sticks, bracket, and 16 different bits:

    • 2.5mm hex
    • 3mm hex
    • 4mm hex
    • 5mm hex
    • T-10
    • T-15
    • T-20
    • T-25
    • T-30
    • 1/8″ Hex
    • 5/64″ Hex
    • 3/32″ Hex
    • 5/32″ Hex
    • 3/16″ Hex
    • Slotted #5
    • Phillips #1

    The ultimate gun maintenance tool. Take the shop tool experience with you on the road.

    • High quality steel construction (can withstand 40Nm of Torque)
    • Compact
    • Durable
    • Accepts any standard 1/4″ bit
    • Weight: 116 grams
Facebook
Shopping Cart