Gray Ops CNC
Gray Ops CNC is a prestigious brand renowned for their unparalleled commitment to quality, innovation, and precision. The brainchild of National Champion shooter David Preston, Gray Ops CNC offers meticulously engineered products designed to enhance and improve the performance of precision shooters.
Always striving to produce the very best products, Gray Ops CNC never sacrifices quality for quantity. Their core is built on doing things right the first time.
-
Gray Ops Outdoorsman Arca Adapter
$54.99 Add to cartNOTES:
- This product only works with Outdoorsmans Binocular Mounts and is specifically designed with custom anti-rotate pins for exact fitment.
- Does not include Outdoorsmans Binocular Mount
PURPOSE:
- Attach to bottom of Outdoorsmans Bino Mounts for a true Anti-rotate arca adapter
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins to fit Outdoorsmans Bino Mount
- Includes “captured” 1/4-20 screw
-
Gray Ops M-Lok External Weights Full Kit / 4 Short & 2 Long – MATRIX FIT( for use with & without MPA internal weight kit BOTH SETS OF SCREWS INCLUDED)
$269.99 Add to cartGet the perfect balance with External forend weights. Designed for M-Lok chassis with configurations similar to the MPA Matrix.
FEATURES
- Black Nitride finish
- Integral Flush cup
- Shaped to be support hand friendly during push/pull/press positional shooting
- Compatible with MPA internal weight kits on Matrix
- Full kit (6 weights) includes 4 short weights and 2 long weights
- Full kit adds just over 2.5 pounds (41 oz.)
- Short Weights- 3.125″ in length at 6 oz. each (Covers 2 M-Lok slots)
- Long Weights- 4.7″ in length at 9 oz. each (Covers 3 M-Lok slots)
Available with all M-Lok Hardware
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
Available with M-Lok and Long screws (Compatible with MPA Matrix and ESR Internal weights)
- Short Pair (2 Short weights)
- Long Pair (2 Long weights)
- Full Kit (4 Short weights and 2 Long weights)
-
Gray Ops CNC – Brass Magneto Speed V3 Mount – Complete with Arca Clamp
$439.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount With ARCA Clamp allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
-
Gray Ops Brass Weights for Mini Plate V2
$62.99 Add to cartEnhance your shooting stability with the Brass Weights for Mini Plate V2 from Gray Ops CNC, an optional add-on that increases recoil reduction and grip by adding 12 ounces of weight.
-
Gray Ops CNC – Bag Stop – Mini Plate Mount
$129.00 Add to cartIntroducing Gray Ops CNC Bag Stop – Mini Plate Mount, the perfect shooting accessory to enhance stability while avoiding magazine contact, ensuring reliable feeding for your rifle. Designed for use with Mini Plate V2 and Mini Plate PRO, this bag stop is lightweight, expertly contoured, and easy to install with two steel hex bolts.
-
MasterPiece Arms BA Comp Competition Side Rails – For BA Comp Chassis – Black
$174.99 Add to cartCompetition Side Rails, designed for the BA Comp chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.
Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags. The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.
The side rails are compatible with the MPA internal weights and Gray Ops CNC Side Rail Weights, available for purchase separately.
System includes:
- Left and right side rail
- 8 “t-nuts”
- 8 fasteners for attaching the rails to the nuts
- 8 fasteners for attaching to the MPA Internal Weight System.
Compatible only with the BA and BA Comp chassis
Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.
See below for compatibility with various arca clamp products:
- MPA RAT Clamp & RAT Accessories – Compatible
- Area 419 Knob type Arcalock Clamp – Compatible
- GrayOps Mini Plate Pro – Compatible
- GrayOps Mag Cut Mini Plate – Not Compatible
- GrayOps Amp Elite Multi Plate – Compatible
- GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
- Area 419 Harris Bipod Arca Clamp Kit – Compatible
- Really Right Stuff BTC-Pro Clamp – Not Compatible
- Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
- Really Right Stuff SC-LR Throw Lever Clamp – Compatible
- Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
- Cyke Pod Bipods – Compatible
- Cruxord Tripos – Compatible
- Leofoto Tripods with Throw Lever Clamp – Compatible
- RRS Tripos with Throw Lever Clamp – Compatible
To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.
We will continue to update this list.
-
Gray Ops AMP Annealing Block
$82.00 Read moreFEATURES
- Machined from 6061 Aluminum
- Holds up to 6 AMP Annealing Pilots and 1 Brass Case holder
- Compatible with Gray Ops Reloading Base Stand
INCLUDED
- AMP Annealer Organization Block
- 4 Rubber Feet
-
-
Sale!
Gray Ops Ckye-Pod ARCA Clamp Adapter
Original price was: $198.99.$188.00Current price is: $188.00. Add to cartPURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Gray Ops 6GT AW Magazine
$239.99 Read moreThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Gray Ops CNC Precision Scope Mount Bubble Level
$81.00 Add to cartEliminate rifle “cant” with the direct attach bubble level designed specifically for the Gray Ops CNC Precision Scope Mount. When attached via our tight locking V-Groove design, this bubble level is visible just over the left or right side scope parallax/windage knob when viewing through the scope. Making it easy to stay in the scope and still view the bubble level. Mounts on either the left or right side of the ring accommodating both left and right handed shooters.
(mounting screws included)
Weight: 0.3 Oz
-
-
Gray Ops CNC MasterPiece Arms BA Comp Side Rail Weights – Steel
$174.00 Add to cartPURPOSE
- Give the perfect balance point to your MPA BA Comp/Matrix/ESR Chassis when combined with the MPA Competition Side Rails
- Added weight Reduces recoil and adds stability
- Added locations for hand gripping
FEATURES
- Machined from 1018 cold rolled steel
- Black Nitride finish for superior corrosion and rust resistance
- Includes 4 weights (two weights per side)
- Each weight has 3 built in flush cup locations (12 total per kit) for each sling and accessory attachment
- Adds 27.4 ounces per 4 weight kit
- BA Comp Kit Dimensions roughly 0.6 x 0.6 x 5.25”
- Matrix/ESR/Matrix PRO Kit Dimensions roughly 0.5 x 0.6 x 6”
- Hardware to attach to side rails included
NOTE
- Side rails (shown in picture) purchased separately from MPA website must be installed to utilize these weights
-
Gray Ops MPA Matrix PRO – Internal Weight Kit
$234.99 Read morePURPOSE
- Add weight forward of the magazine for better balance
- Increase weight for added recoil reduction and spotting shots
FEATURES
- Machined Steel
- Black Nitride finish for corrosion/rust protection
- Includes 8 total weights (7 Regular/1 Contoured to accept Spigot mount)
- Includes Stainless Steel hardware
- Kit adds 30 ounces for forend
- 6 threaded holes per weight to allow location flexibility
- Installs without removing barreled action from chassis
-
Gray Ops Harris Bipod QDA
$84.99 Read morePURPOSE
- The Quick Detach Adapter allows a Harris notched leg bipod to use Atlas style feet/accessories. Different style feet can be changed out in seconds with no tools required. Perfect for competition or hunting scenarios where you must adapt to the specific task at hand.
- Eliminates the need to carry multiple bipods
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Set screw allows for a rigid, “no wiggle” lock-up on your Bipod
- Remove your atlas foot/accessory quick and easy with the spring loaded button
- Adds approximately 1” total height to the bipod
- Allen wrenched included for easy installation
-
Gray Ops Ckye-Pod Clamp Adapter
$58.99 Add to cartPURPOSE:
- Replaces Ckye-Pod clamp making it universal to all Atlas compatible clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard black anodizing
- Includes shorter brass tipped panning set screw
- Adds 0.3125” in height
- Hole machined on bottom to accept the “pan-lock” some versions of Cyke Pod have
Installation:
- Remove existing clamp by loosening set screw on back of bipod
- Pull the clamp off the bipod and save the pull stud and wave washer
- Install the wave washer and pull stud into adapter
- Re-install adapter onto bipod by tightening the set screw on the bipod
- Make sure not to overtighten the pan-lock brass tipped set screw (very minimal pressure needed)
- Install Atlas compatible arca clamp
-
Rangefinder Extension Adapter GRAY OPS CNC
$94.99 Read moreNOTES:
Designed for rangefinders/optics without the anti-rotate pin
This product requires a 4-side dovetail adapter to be ARCA mounted. Can still be mounted to non-arca tripods via ¼-20 threaded hole in bottom
Some pictures shown with optional adapterPURPOSE:
Allows 3” of extra optic/accessory travel
Moves optic closer to edges of AMP PlatesFEATURES:
Machined from 6061 Aluminum
Type II Black Anodizing
Includes sliding ¼-20 captive screw
Extra ¼-20 threaded hole in bottom for different attachment methods -
Gray Ops AICS Magazine Base Pad
$39.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Gray Ops BR/Dasher AW Magazine
$239.99 Read moreThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
Gray Ops CNC
Gray Ops CNC stands as a beacon of excellence in precision shooting equipment. Founded by David Preston, a highly accomplished shooter who not only won a National Championship in 2015, but also earned his Engineering degree from Penn State University.
David’s vision for Gray Ops CNC is grounded in his real-world experience as a professional shooter, as well as his foundational understanding of engineering principles. These insights, coupled with a profound dedication to producing the very best products without sacrificing quality, form the backbone of Gray Ops CNC’s unwavering commitment to its customers.
The Gray Ops CNC Difference
What truly sets Gray Ops CNC apart is their attention to detail, along with a deep-seated commitment to innovation. This, coupled with their passion for quality and perfection, helps Gray Ops CNC deliver top-notch, precision shooting products that can make a real difference in the performance of a shooter.
Key distinguishing factors of Gray Ops CNC include:
- Foundational Expertise: The brand is the brainchild of a seasoned professional shooter and an engineer. This unique combination ensures the products are not just theoretically sound, but also tried and tested in real-world shooting scenarios.
- Quality Assurance: Gray Ops CNC is unwavering in their commitment to quality. This dedication shows in every aspect of their operation, ensuring each product leaving their shop is nothing short of the best.
- Innovation Focused: Gray Ops CNC consistently pushes the boundaries of what’s possible in precision shooting equipment. They strive to lead rather than follow, and this is evident in their unique, user-friendly, and game-changing products.
Why Gray Ops CNC?
Choosing Gray Ops CNC means opting for precision, reliability, and superior performance. Whether you’re a professional shooter or a passionate enthusiast, you’ll appreciate the difference Gray Ops CNC’s products bring to your shooting experience. With Gray Ops CNC, you’re not just buying a product – you’re investing in a brand that truly understands and caters to your needs as a precision shooter.