Insite Arms

Are you looking for a more accurate rifle that will last you well into the future? Here at Insite Arms, we understand that a major purchase like a new rifle is an investment, which is why we hold ourselves to unyielding standards. Our goal is to meet your uncompromised expectations for quality with our unique approach building your next firearm.

footerLogo

Showing 1–21 of 37 results

Filter
  • The “Heathen” Muzzle Brake

    $19.99$260.00 Select options

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The Heathen was specifically designed to produce minimal blast and disturbance directed toward the shooter and spotter reducing fatigue, ground debris disturbance and muzzle jump.

  • IMG_8187

    The “Heathen” G2 Muzzle Brake with Integral Tuner

    $269.00 Select options

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The G2 Heathen has optimized specific features for competition and precision marksmen demanding the utmost in performance from a large bodied muzzle brake. *******PLEASE NOTE – UNPRECEDENTED DEMAND HAS LED TO DELAYED AVAILABILITY – WE ARE CURRENTLY PRODUCING MORE PRODUCT ASAP. IF ACCEPTABLE ALLOW ORDER TO GO INTO BACKORDER STATUS AND YOU WILL HAVE YOUR BRAKE ALLOCATED IN THE ORDER YOU PLACED*****

  • insiteBackGreen
  • The “Heathen” Muzzle Brake “LITE” 0.885 6.5CAL 5/8×24

    $225.00 Read more

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The Heathen was specifically designed to produce minimal blast and disturbance directed toward the shooter and spotter reducing fatigue, ground debris disturbance and muzzle jump.

  • Insite Arms Loading Block 100 ct. Block with Bullet Tray

    $199.00 Select options

    Milled from a solid 18″ 1″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred

    – Includes a generous sized Bullet or Parts tray for convenience.

    • 5 size options for cartridge chamberings

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 18″x 6″x 1″

     

  • Insite Arms Barrel Tuner - For 1.125" Heathen 3/4 x 24 , 18x1, 3/4x20 thread Black Nitride

    Insite Arms Barrel Tuner – For 0.995″ Heathen 5/8×24 thread Black Nitride

    $200.00 Add to cart

    Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

    The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.

     

  • Screenshot (9)
  • Screenshot (14)
  • The “Heathen” Muzzle Brake “LITE” 0.885 30CAL 5/8×24

    $225.00 Read more

    The Heathen Muzzle Brake was developed to provide the optimal balance between recoil management and muzzle blast while allowing the shooter to maintain sight picture and alignment with the target. The Heathen was specifically designed to produce minimal blast and disturbance directed toward the shooter and spotter reducing fatigue, ground debris disturbance and muzzle jump.

  • Insite Arms Barrel Tuner - For 1.125" Heathen 3/4 x 24 , 18x1, 3/4x20 thread Black Nitride

    Insite Arms Barrel Tuner – For 0.885″ Heathen 5/8×24 thread Black Nitride

    $200.00 Add to cart

    Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

    The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.

     

  • 20220711_162012

    Insite Arms 2-Round AICS Magazine Extension

    $19.99 Add to cart

    This Insite Arms Mag Extender is designed for 308 sized Box magazines, AI, MDT & Accurate – single feed only. (Will not work with AW Mags).

    Produced from 6061 Aluminum.

  • Insite Arms Barrel Tuner - For 1.125" Heathen 3/4 x 24 , 18x1, 3/4x20 thread Black Nitride

    Insite Arms Barrel Tuner – For 1.125″ Heathen 5/8×24 thread Black Nitride

    $200.00 Add to cart

    Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

    The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.

     

  • Insite Arms Barrel Tuner - For 1.125" Heathen 3/4 x 24 , 18x1, 3/4x20 thread Black Nitride

    Insite Arms Barrel Tuner – For 0.995″ Heathen 3/4 x 24 , 18×1, 3/4×20 thread Black Nitride

    $200.00 Add to cart

    Barrel Tuners have solidified their place in the Benchrest and F-Class disciplines. Tuners are now being recognized as a valuable tool in when group size has potential for improvement especially when the shooter is limited to Factory Ammunition or a specific load or bullet selection.

    The Insite Tuner will work with any of the 1.125″, 0.995″ & 0.885″ Heathen Brakes, without tools or gunsmith modification. The tuner does not touch the barrel or the brake body – only the lock collar/nut. The Tuner is supplied with a replacement “outside-threaded” locking collar / jam-nut for the muzzle brake. The set screws engage only a flat portion of the collar. Our design allows proper position of the crown flush with the rear wall of the first port. This avoids accuracy degrading turbulence which occur when shrouding the crown in a “tunnel” before gasses can discharge from the first port. The tuner can be removed and the Heathen brake run alone in just seconds if the Insite Tuner is not needed or required. The Heathen locking collar requires no tools – hand tight is nearly always sufficient especially on most custom rifles with true threads and square shoulders.

     

  • Screenshot (12)
  • 20220310_154952 (1)

    Insite Arms Loading Block 100 ct. Block

    $159.99 Select options

    Milled from a solid 13.75″ 1″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 6 pounds this block is solid and doesn’t move when bumped or jarred

    • 5 size options for cartridge chamberings

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 13.75″x 6″x 1″

     

  • Insite Arms 6mmBR / Impact 737 – demo

    $4,900.00 Read more

    6mmBR

    Impact 737R Action
    Krieger 1/7.5 MTU 26"
    Triggertech Diamond
    MPA BA Comp
    Gray Ops CNC Adj Thumb Rest Kit
    10rnd AICS Mag
    Heathen Brake 4 Port
    Spin Polish Barrel
    3/8moa Guarantee
    190 rounds fired
    
    
  • Accuracy International Pre-Fit Barrel 6.5 Creedmoor – 26″ Hawkhills MTU AIAT / AIAX

    $1,390.00 Read more

    The exclusive primer design provides the best sensitivity and most consistent ballistics in the industry. The precision-built Sierra® MatchKing® bullet is shot to win more matches than any other rifle bullet. It’s the only choice for the world’s most elite shooters.

  • Accuracy International Pre-Fit Barrel 308 Win – 22″ Krieger Heavy Palma AIAT / AIAX

    $1,390.00 Read more

    The exclusive primer design provides the best sensitivity and most consistent ballistics in the industry. The precision-built Sierra® MatchKing® bullet is shot to win more matches than any other rifle bullet. It’s the only choice for the world’s most elite shooters.

  • Screenshot (8)
  • Insite Arms Loading Block 100 ct. Bullet Tray

    Insite Arms Loading Block 100 ct. Each Side Used for different Case Sizes- 2″ THICK BLOCK

    $249.99 Select options

    Milled from a solid 14″ x 2″ x 6″ piece of Aluminum, this Loading Block was designed with all the features we appreciate at the Loading Bench:

    This Block can accommodate holes for cartridges on both sides Top and Bottom. This allows the block to be used for 2 different sized cartridges.

    -100 rounds are spaced with ample room to insert and remove each case without disturbing adjacent brass – even with larger than average hands

    -At approx. 7 pounds this block is solid and doesn’t move when bumped or jarred

    – Includes a generous sized Bullet or Parts tray for convenience.

    – The Finish of this Block is 2nd to None! If you appreciate precision and craftsmanship, the Design and Killer-Looks make it a focal point of your Gun Room.

    Dimensions: 14″x 6″x 1″

     

     

  • Sale! IMG_8161

    Insite Arms 6.5mm Creedmoor – Impact 737, Foundation, Krieger

    $6,899.00 Add to cart

    6.5mm Creed

    Impact 737 Action RH
    Krieger 1/7.5 26" Heavy Varmint
    Spiral fluting
    Triggertech Diamond
    Cerakote Stock
    5rnd AICS Mag
    Heathen Brake 4 Port
    3/8moa Guarantee

Insite Arms

Other Brands

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!