Spuhr
Unique advanced firearms accessories that are highly innovative and have a high level of craftmansship.
-
SPUHR M5X35 TX20 CLAMPING SCREWS
$9.99 Read moreArticle no.: A-0150
M5x35 Torx 20 screws for the side clamp (5 pcs) on SP-***1 mounts. The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque values. Includes SS washers. -
Gray Ops Spuhr Ring Turret Guards
$189.99 Add to cart     ***Only compatible with Spuhr Rings***
PURPOSE
- Added protection for your scope turrets
- Prevents ârolling a turretâ during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to âloadâ into
-
SPUHR SP-5001 Ø35 H30mm 0MIL PIC
$559.00 Read moreArticle no.: SP-5001
0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 6.5 mm/.255″ (from the bottom of the tube to bridge of the mount body) Length: 126 mm/4.96” Weight: 239 g/8.4 oz 10-degree wedge included -
SPUHR A-0032 PICATINNY RAIL H14 L75 MM
$82.99 Read moreArticle no.: A-0032
Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz -
SPUHR SP-4001C Ø34 H30mm 0MIL PIC
$559.00 Read moreArticle no.: SP-4001
0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 238 g/8.4 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. Note: Gen3 version has a fifth clamping screw, allowing the SP-4001 to be mounted in a cantilever fashion. -
-
SPUHR A-0037 PICATINNY RAIL H20 L75 MM
$82.99 Add to cartArticle no.: A-0032
Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz -
SPUHR Separate Rings SR-4000 Ø34 H25.4MM PIC
$469.00 Add to cartArticle no.: SR-4000
Height: 25.4 mm/1” Length: 32 mm/1.26” Weight: 183 g/6.5 oz Includes the A-0080/81 Leveling Kit -
SPUHR SP-4601C Ø34 H30mm 6MIL PIC
$559.00 Add to cartArticle no.: SP-4601
6 MIL/20,6 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314″ (from the bottom of the tube to bridge of the mount body) Length: 121 mm/4.76” Weight: 227 g/8.0 oz 10-degree wedge included Note: As of 2019 this mount is delivered with five clamping screws to allow for cantilevered mounting. -
-
SPUHR MOUNT HS40-23A SAKO AESTHETIC RINGS Ø34 H23/0.91″
$223.99 Read moreArticle no.: HS40-23A
Hunting rings for 34 mm tube on SAKO OptiLock bases/rails. Features two plain classic top covers. Height: 23 mm/0.91″ Weight: 79 gram/2.8 oz “Protected, EU Design Reg. No. 002438440/0001-0002” -
SPUHR SP-4003B Ø34 H38 0MIL PIC
$559.00 Read moreArticle no.: SP-4003B
For scopes with long erector housings such as U.S. Optics TPAL and Nightforce BEAST. Distance from ring to ring is 82 mm/3.228″. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 147 mm/5.79” Weight: 268 g/9.5 oz 10-degree wedge included -
SPUHR MOUNT SCT-4001 Ø34 H30MM OMIL TIKKA T3X / SAKO TRG 21/42
$348.99 Add to cartArticle no.: SCT-4001
Our new Hunting Series of mounts – offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCT-4001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o’clock or 3-/9-o’clock position. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 2.75 mm/.108″ (from the bottom of the tube to the bridge of the mount body) Length: 108 mm/4.25” (mount body) Weight: 153 g/5.4 oz Note: For rifles with TRG/Tikka T3 dovetail – NOT for Picatinny rail or SAKO TRG-S. . Does not have enough clearance for the Trijicon AccuPower® 4.5-30×56. 10-degree wedge included -
SPUHR Separate Rings SR-3000 Ø30 H30MM PIC
$469.00 Add to cartArticle no.: SP-4003B
For scopes with long erector housings such as U.S. Optics TPAL and Nightforce BEAST. Distance from ring to ring is 82 mm/3.228″. 0 MIL/0 MOA Height: 38 mm/1.5” Length: 147 mm/5.79” Weight: 268 g/9.5 oz 10-degree wedge included
