Gray Ops CNC
Gray Ops CNC is a prestigious brand renowned for their unparalleled commitment to quality, innovation, and precision. The brainchild of National Champion shooter David Preston, Gray Ops CNC offers meticulously engineered products designed to enhance and improve the performance of precision shooters.
Always striving to produce the very best products, Gray Ops CNC never sacrifices quality for quantity. Their core is built on doing things right the first time.
-
Gray Ops CNC Accessory Pic Rail – Long
$109.99 Add to cartLong picatinny rail for Precision Scope Mount accessory interface (screws included)
Attaches to multiple V-Groove interface locations. Tightly and repeatably aligns to the mount.
Length: 4.12″
Height above Mount: 1.00″
Weight: 1.9 Oz
Suggested Torque: 50 in-lb
-
Sale!
Out of stock
Gray Ops CNC Hunter Tripod Plate
Original price was: $364.00.$345.80Current price is: $345.80. Read morePURPOSE:
- The bag stop was designed to give shooters the ability to “load” into their shooting bag while also preventing any contact to the mag which can cause feeding issues for the rifle. This is especially helpful for 22LR actions to feed reliably.
FEATURES:
- Mounts directly to any 1.5” arca rail via integral clamp
- Does not need to be “slid off” the end of the rail to remove
- One steel hex bolt for installing/removing or repositioning
- Machined from 6061 aluminum
- Black anodize finish
- Length designed for standard 10 round and extended magazines
- Weight – 2.6 ounces
-
Sale! Out of stock
Gray Ops CNC Bag Stop – Quick Detach
Original price was: $249.99.$239.00Current price is: $239.00. Read morePURPOSE:
- The bag stop was designed to give shooters the ability to “load” into their shooting bag while also preventing any contact to the mag which can cause feeding issues for the rifle. This is especially helpful for 22LR actions to feed reliably.
FEATURES:
- Mounts directly to any 1.5” arca rail via integral clamp
- Does not need to be “slid off” the end of the rail to remove
- One steel hex bolt for installing/removing or repositioning
- Machined from 6061 aluminum
- Black anodize finish
- Length designed for standard 10 round and extended magazines
- Weight – 2.6 ounces
-
Gray Ops CNC Precision Scope Mount 34mm dia. / 1.26″h
$539.00 Read moreDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Gray Ops CNC – Brass Magneto Speed V3 Mount (Without ARCA Clamp)
$289.99 Add to cartThe Gray Ops CNC Magneto Speed V3 Mount allows you to save ammo by checking your zero and chronograph at the same time! Easily attach your V3 Bayonet directly to your ARCA or Picatinny rail without affecting barrel harmonics, ensuring repeatable positioning and accurate results.
NOTE: This product does not come with the ARCA Clamp, for the mount with the clamp, please see Brass Magneto Speed V3 Mount With Clamp.
-
Gray Ops Spuhr Ring Turret Guards
$189.99 Add to cart     ***Only compatible with Spuhr Rings***
PURPOSE
- Added protection for your scope turrets
- Prevents ârolling a turretâ during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall and (1) Short turret guard respectively for Elevation and Windage
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to âloadâ into
-
Gray Ops CNC Garmin Tripod Picatinny Rail
$36.99 Read morePURPOSE
- The Gray Ops Garmin Picatinny Tripod Rail was designed for shooters to utilize the Garmin Tripod along with our Garmin Mount making our system the most versatile on the market.
FEATURES
- 1/4×20 Threads for easy mounting to the Garmin Tripod
- Black Anodized – Hard Coat Finish
NOTES
- Sold Separately and not a part of the Garmin Kit.
- Does not include tripod or Garmin Chronograph
-
Gray Ops CNC CMI Chamber Flag & Barrel Cooler Right Hand
$69.99 Read moreThis short action chamber flag has some features we really love. Prevents mags from being inserted unless the flag is removed and the ability to add a chiller on those hot days!- Detects round left in chamber.
- Prohibits AICS magazines from loading when flag is in place, (AW mags when bolt is pulled back).
- AICS magazines must be removed for flag to go into chamber (AW mags when bolt is pulled back).
- Prevents leaving magazine in rifle when flag is inserted.
- One hand insertion and removal.
- Fits short actions.
- Push to forward position and use with portable air pump for barrel cooling.
- The cooler is rechargeable via USB – approximate 15 min run time, it is recommended to connect a small USB battery pack to recharge while not in use.
- For cooling barrel in vertical orientation place one side of elastic over windage knob to hold bolt forward.
- Includes attached fob with target reference information.
-
Gray Ops Mag-Cut Mini Plate
$214.99 Read moreIntroducing the Gray Ops Mag-Cut Mini Plate, a precision tool designed for increased stability and balance when shooting from Accuracy International / J-Allen Style / similar chassis.
-
Gray Ops Harris BiPod ARCA Clamp Adapter
$178.99 Add to cartPURPOSE
- Attaches to Harris, Cyke-Pod, and Atlas style Bipods
- Quickly and reliably attach/detach your bipod via our adjustable tension throw lever
FEATURES
- Easy/ergonomic gripping of lever for attach/detach
- Throw lever design allows for adjustable tension settings from hard close, to soft close, and a few settings in between. 11 total lockable positions per full âNutâ rotation which adjusts the tension .002 per position
- QD Throw lever and all internal stress parts machined from Steel and are Black Nitride
- Main housing machined from 6061 Aluminum and hard coat black anodized
- Harris bipod version includes QD Arca clamp and Harris adapter
- Atlas version includes QD Arca clamp
- Cyke-Pod Version includes QD Arca Clamp and Cyke-pod adapter
-
Sale!
Thumb-Rest / Thumb-Rail MPA Chassis GRAY OPS CNC
Original price was: $126.99.$99.00Current price is: $99.00. Add to cartPurposes
Enhanced grip/comfort for barricade style positional shooting
Compatable with MPA BA Chassis 4 hole or older 6 hole NV bridge chassisFeatures
Machined from 6061 Aluminum and Hardcoat Black Anodized
Ergonomic comfortable cutouts
Machined for perfect fit to blend into chassis contours
Barricade Rail utilizes existing screws from factory picatinny rail
Thumb rest utilized 4 supplied T-15 torx screws -
Gray Ops CNC MasterPiece Arms MPA Side Rail Inserts For MPA Matrix/ESR Chassis- Aluminum **** Will Fit Matrix Pro With Additional Side Rails
$84.99 Read morePURPOSE:
- Ergonomic gripping locations
- Light weight (1.6 oz each insert)
- Multiple Flush Cup locations for accessories such as the “Sikes Clutch”
FEATURES:
- Machined from 6061 Aluminum
- Black Anodize Hard Coat finish
- Includes (2) two inserts
- Each insert has 6 built in flush cup locations (12 total per pair) for each sling and accessory attachment
- Lightweight at 1.6 ounces per insert
- Hardware to attach to side rails included
NOTES:
- MPA Side rails purchased separately via MPA website
- Inserts only compatible with Side Rails from MPA
-
Gray Ops CNC – Brass Magneto Speed V3 Mount Angled Adapter
$54.99 Add to cartElevate your shooting precision with the Gray Ops Brass Magneto Speed V3 Mount Angled Adapter, expertly designed to ensure perfect parallel alignment of the Magneto Speed V3 Bayonet to your angled forends on hunting or traditional style stocks/chassis.
-
Gray Ops CNC Accessory Pic Rail – Short
$91.00 Add to cartShort picatinny rail for Precision Scope Mount accessory interface (screws included)
Attaches to multiple V-Groove interface locations. Tightly and repeatably aligns to the mount.
Length: 1.75″
Height above Mount: 0.83″
Weight: 0.7 Oz
Suggested Torque: 45 in-lb
ONLY FOR USE WITH GRAY OPS CNC SCOPE MOUNTS
Weight: 1.9 Oz
Suggested Torque: 50 in-lb
-
Gray Ops AW Magazine Base Pad
$39.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Gray Ops CNC 90* Send iT Adapter
$83.99 Add to cartThe Gray Ops CNC Bag Stop – Arca Mount is a precision-engineered solution that allows shooters to stabilize their shooting bags without risking contact with the mag, ensuring reliable feeding for 22LR actions and more. Easily mountable to any 1.5” arca rail, this bag stop is designed for convenience and performance.
-
Gray Ops CNC Precision Scope Mount 34mm dia. / 1.540″h
$539.00 Read moreDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Sale!
Gray Ops CNC MasterPiece Arms MPA Side Rail Inserts For MPA BA COMP Chassis- Aluminum – Black
Original price was: $84.99.$67.99Current price is: $67.99. Add to cartPURPOSE:
- Ergonomic gripping locations
- Light weight (1.6 oz each insert)
- Multiple Flush Cup locations for accessories such as the “Sikes Clutch”
FEATURES:
- Machined from 6061 Aluminum
- Black Anodize Hard Coat finish
- Includes (2) two inserts
- Each insert has 6 built in flush cup locations (12 total per pair) for each sling and accessory attachment
- Lightweight at 1.6 ounces per insert
- Hardware to attach to side rails included
NOTES:
- MPA Side rails purchased separately via MPA website
- Inserts only compatible with Side Rails from MPA
-
Sale!
Gray Ops Turret Guards – MPA BA Scope Mount (New Style Only)
Original price was: $109.99.$82.49Current price is: $82.49. Add to cart***Only Compatible with new style MPA BA Scope mount with side tapped holes***
PURPOSE
- Added protection for your scope turrets
- Prevents “rolling a turret” during barricade shooting causing accidental misses and dropped points
- Requested and designed by top level PRS shooters
FEATURES
- Machined from 6061 Aluminum and Hard Black Anodized
- Includes (1) Tall elevation and (1) Short Right hand windage turret guard
- Includes mounting screw hardware
- Multiple mounting points to get the desired distance from each turret
- Lightweight, Low-profile, but also strong enough to “load” into
Gray Ops CNC
Gray Ops CNC stands as a beacon of excellence in precision shooting equipment. Founded by David Preston, a highly accomplished shooter who not only won a National Championship in 2015, but also earned his Engineering degree from Penn State University.
David’s vision for Gray Ops CNC is grounded in his real-world experience as a professional shooter, as well as his foundational understanding of engineering principles. These insights, coupled with a profound dedication to producing the very best products without sacrificing quality, form the backbone of Gray Ops CNC’s unwavering commitment to its customers.
The Gray Ops CNC Difference
What truly sets Gray Ops CNC apart is their attention to detail, along with a deep-seated commitment to innovation. This, coupled with their passion for quality and perfection, helps Gray Ops CNC deliver top-notch, precision shooting products that can make a real difference in the performance of a shooter.
Key distinguishing factors of Gray Ops CNC include:
- Foundational Expertise: The brand is the brainchild of a seasoned professional shooter and an engineer. This unique combination ensures the products are not just theoretically sound, but also tried and tested in real-world shooting scenarios.
- Quality Assurance: Gray Ops CNC is unwavering in their commitment to quality. This dedication shows in every aspect of their operation, ensuring each product leaving their shop is nothing short of the best.
- Innovation Focused: Gray Ops CNC consistently pushes the boundaries of what’s possible in precision shooting equipment. They strive to lead rather than follow, and this is evident in their unique, user-friendly, and game-changing products.
Why Gray Ops CNC?
Choosing Gray Ops CNC means opting for precision, reliability, and superior performance. Whether you’re a professional shooter or a passionate enthusiast, you’ll appreciate the difference Gray Ops CNC’s products bring to your shooting experience. With Gray Ops CNC, you’re not just buying a product – you’re investing in a brand that truly understands and caters to your needs as a precision shooter.