Gray Ops CNC
Gray Ops CNC is a prestigious brand renowned for their unparalleled commitment to quality, innovation, and precision. The brainchild of National Champion shooter David Preston, Gray Ops CNC offers meticulously engineered products designed to enhance and improve the performance of precision shooters.
Always striving to produce the very best products, Gray Ops CNC never sacrifices quality for quantity. Their core is built on doing things right the first time.
-
Sale!
Out of stock
Gray Ops Extra Reloading Stand “ARM”
Original price was: $55.00.$38.50Current price is: $38.50. Read moreFor those who are taking their “Reloading Stand” to the next level and need an extra “Arm”
-
Sale! Out of stock
-
Sale!
Out of stock
Manners / Gray OPS / MPA Sykes Clutch Knob – Orange Finish
Original price was: $119.00.$83.30Current price is: $83.30. Read moreDescription
Designed by MCS Team Shooter, Bryan Sikes, the Sikes clutch knob works in any quick-detach flush cup base or the Sikes Rail (see photo).
-
Gray Ops 30MM Precision Scope Rings
$284.99 Select options This product has multiple variants. The options may be chosen on the product page30MM Precision Scope Rings
Built with the same standards are our Precision Scope Mount lineup, these 2 piece rings are the perfect addition to a hunting or competition rifle setup that demands the best.
FEATURES:
- 7075 Aluminum
- Integral Level
- Integral Offset Recoil Lug
- Type III Hard coat Anodize
- Precision Bore
- T25 Torx Plus
Available in:
- 0.850″ – Low
- 1.060″ – Medium
Torque Specs: Engraved on the underside of the ring base.
-
Sale! Out of stock
Gray Ops CNC Precision Scope Mount 36mm dia. / 1.540″h
Original price was: $539.00.$496.00Current price is: $496.00. Read moreDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Gray Ops CNC Precision Scope Mount 36mm dia. / 1.26″h
$496.00 Read moreDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Sale!
Gray Ops CNC Precision Scope Mount 34mm dia. / 1.125″h
Original price was: $539.00.$496.00Current price is: $496.00. Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Sale!
MasterPiece Arms Side Rails – For Matrix / ESR Chassis – Black
Original price was: $199.00.$139.30Current price is: $139.30. Add to cartCompetition Side Rails, designed for the Matrix or ESR Chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.
Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags. The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.
The side rails are compatible with MPA weight tuning system and the Gray Ops CNC Side Rail Weights made specifically for the ESR/Matrix Comp Side Rails, available for purchase separately.
System includes:
- Left and right side rail
- 8 “M-lok Nuts”
- 8 fasteners for attaching the rails to the nuts
- 8 fasteners for attaching to the MPA Internal Weight System.
Compatible only with the Matrix & ESR chassis
Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.
See below for compatibility with various arca clamp products:
- MPA RAT Clamp & RAT Accessories – Compatible
- Area 419 Knob type Arcalock Clamp – Compatible
- GrayOps Mini Plate Pro – Compatible
- GrayOps Mag Cut Mini Plate – Not Compatible
- GrayOps Amp Elite Multi Plate – Compatible
- GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
- Area 419 Harris Bipod Arca Clamp Kit – Compatible
- Really Right Stuff BTC-Pro Clamp – Not Compatible
- Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
- Really Right Stuff SC-LR Throw Lever Clamp – Compatible
- Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
- Cyke Pod Bipods – Compatible
- Cruxord Arca Clamp Tripods – Compatible
- Leofoto Acra Throw Lever Clamp Tripods – Compatible
- RRS Arca Throw Lever Clamp Tripods – Compatible
To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.
-
Sale!
Gray Ops CNC Precision Diving Board
Original price was: $199.00.$139.30Current price is: $139.30. Add to cartPrecision Diving Board
The Gray Ops Precision Diving Board is perfect for mounting Rail Mounted Ballistic Laser Rangefinders, red-dots, and other picatinny mounted accessories. The 1-piece design makes for one of the most rigid diving boards on the market.
DISCLAIMER
- ONLY FOR USE WITH GRAY OPS CNC SCOPE MOUNTS
Weight: 0.7 Oz
Suggested Torque: 45 in-lb
ONLY FOR USE WITH GRAY OPS CNC SCOPE MOUNTS
Weight: 1.9 Oz
Suggested Torque: 50 in-lb
-
Sale!
Gray Ops Turret Glow
Original price was: $155.00.$108.50Current price is: $108.50. Add to cartPURPOSE:
- Illuminate scope turrets in low light/dusk/dark conditions
- Prevent eye strain/ no “glow” reaches shooters eyes
-
Sale! Out of stock
Gray Ops CNC Precision Scope Mount 30mm dia. / 1.125″h
Original price was: $539.00.$496.00Current price is: $496.00. Read moreDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Sale!
Gray Ops CNC Precision Scope Mount 35mm dia. / 1.125″h
Original price was: $539.00.$496.00Current price is: $496.00. Add to cartDesigned for shooters, by shooters. This mount encompasses everything needed for ultimate consistency and reliability. Every mount is inspected via CMM before it leaves our facility, guaranteeing you are getting the very best for you’re precision setup.
FEATURES:
- 7075 Aluminum
- Integrated recoil lug
- Steel thread reinforced cross bolt holes
- Matched sets, serialized ring caps to bases, orientation markers, ensuring you get a perfect mount in the same orientation it came off the machine.
- Type III Hard coat Anodize
- Multiple accessory locations with unique V-Groove self-aligning design
- All hardware shares the same T25Plus Torx heads (Rings, Crossbolts, and Accessories) so only one tool is needed
Weight: 7.9 Oz
Outside Length: 4.85”
Inside Length: 2.55”
Finish: Flat Black
T25 Plus Torx Bit included
Accessories sold separately
-
Sale!
Gray Ops CNC Rangefinder PLRF 25 Arca Mount
Original price was: $109.00.$76.30Current price is: $76.30. Add to cartPURPOSE:
- Attach to bottom of PLRF25 Vectronix Rangefinders for use in 1.5” Arca Clamps
FEATURES:
- Machined from 6061 Aluminum
- Hard Black Anodizing
- 4 side dovetail design allows for mounting in the 90, 180, 270, 360 degree directions
- Works with any standard 1.5” Arca clamp
- Low profile design
- Custom machined anti-rotate pins for secure fit onto LRF
- Custom machined for exact fitment and access to battery compartment
- Textured surface for “thumb grip” during offhand use
- Includes ¼-20 screw
-
Rangefinder PLRF 10/15 Arca Mount
$83.99 Read moreMade specifically for the Vectronix line of PLRF 10 and 15 rangefinders.
- Machined from one piece 6061 Aluminum
- Hard anodized black
- 4-directional Arca dovetail
- Built in anti-rotate pins for rock solid lockup
- Anti-slip grooves cut for added grip when using offhand
- Exact fit to follow contour of rubber LRF housing
- Stainless steel hardware included
-
AMP SOLO “Arca Multi-Plate”
Read morePURPOSES
Gun Mounted for widened shooting platform on bags/barricades
Tripod Mountable as Tac table
Dual Optic/Accessory Mounting capable via ARCA clamp and sliding 1/4-20 captive screws (for example spotting scope and rangefinder combination)FEATURES
Machined from 6061 Aluminum and Type II Black Anodized
One 1.5” Arca dovetail mounting clamp for rifle or accessories
Two ¼-20 threaded holes with sliding slots for optics, accessories or future adaptability
Arca Dovetail mounting clamp machined directly into table for low profile, one-piece design
5” Arca dovetail machined into bottom for tripod mounting
Pockets machined along both sides to attach bags with carabiners when using as a tac-table
6 removeable bolts along perimeter of table to support bag during tac-table use or future adaptability
Gray Ops CNC
Gray Ops CNC stands as a beacon of excellence in precision shooting equipment. Founded by David Preston, a highly accomplished shooter who not only won a National Championship in 2015, but also earned his Engineering degree from Penn State University.
David’s vision for Gray Ops CNC is grounded in his real-world experience as a professional shooter, as well as his foundational understanding of engineering principles. These insights, coupled with a profound dedication to producing the very best products without sacrificing quality, form the backbone of Gray Ops CNC’s unwavering commitment to its customers.
The Gray Ops CNC Difference
What truly sets Gray Ops CNC apart is their attention to detail, along with a deep-seated commitment to innovation. This, coupled with their passion for quality and perfection, helps Gray Ops CNC deliver top-notch, precision shooting products that can make a real difference in the performance of a shooter.
Key distinguishing factors of Gray Ops CNC include:
- Foundational Expertise: The brand is the brainchild of a seasoned professional shooter and an engineer. This unique combination ensures the products are not just theoretically sound, but also tried and tested in real-world shooting scenarios.
- Quality Assurance: Gray Ops CNC is unwavering in their commitment to quality. This dedication shows in every aspect of their operation, ensuring each product leaving their shop is nothing short of the best.
- Innovation Focused: Gray Ops CNC consistently pushes the boundaries of what’s possible in precision shooting equipment. They strive to lead rather than follow, and this is evident in their unique, user-friendly, and game-changing products.
Why Gray Ops CNC?
Choosing Gray Ops CNC means opting for precision, reliability, and superior performance. Whether you’re a professional shooter or a passionate enthusiast, you’ll appreciate the difference Gray Ops CNC’s products bring to your shooting experience. With Gray Ops CNC, you’re not just buying a product – you’re investing in a brand that truly understands and caters to your needs as a precision shooter.